[Fri Mar 16 07:32:07 2012] Detection parameters:
  Position = (285.1, 141.0) = 16 36 0.11 -47 48 29.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1807.0 +/- 52.5
  Background counts = 127.8
  Rate = 0.01 +/- 0.0004

[Fri Mar 16 07:32:08 2012] Off-axis axis estimate = 11.46'
[Fri Mar 16 07:39:01 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 07:39:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 16 07:39:01 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Fri Mar 16 07:39:01 2012] source mask rpix=2.8, npix_max = 43, mask sum = 30, frac = 0.691
[Fri Mar 16 07:39:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.16"
[Fri Mar 16 10:04:13 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Mar 16 10:04:13 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_src1.csv
[Fri Mar 16 10:04:13 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Mar 16 10:04:13 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_src1.csv
[Fri Mar 16 10:04:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 10:04:14 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Mar 16 10:04:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Mar 16 10:04:14 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Mar 16 10:04:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Mar 16 10:04:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560180401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 11:43:54 2012] Warning, spatial fit 1 centroid is now closest to src. 24
[Fri Mar 16 11:43:54 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 11:43:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 11:43:54 2012] Assessing source extent using major
[Fri Mar 16 11:43:54 2012] Source does appear to be extended
[Fri Mar 16 11:43:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 11:44:16 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 11:44:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 16 11:44:16 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Fri Mar 16 11:44:16 2012] source mask rpix=2.8, npix_max = 43, mask sum = 30, frac = 0.691
[Fri Mar 16 11:44:16 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.16"
[Fri Mar 16 15:32:23 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar 16 15:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 15:32:23 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar 16 15:32:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_src1.csv
[Fri Mar 16 15:32:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 15:32:24 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar 16 15:32:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Mar 16 15:32:24 2012] fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar 16 15:32:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Mar 16 15:32:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560180401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 16:54:34 2012] Spatial fit model total counts = 6099.250000, observed total counts = 3832.000000
[Fri Mar 16 16:54:34 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Mar 16 16:54:34 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.912255 pixels away
[Fri Mar 16 16:54:34 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 16:54:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 16:54:34 2012] Assessing source extent using major
[Fri Mar 16 16:54:34 2012] Source does appear to be extended
[Fri Mar 16 16:54:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 16:54:59 2012] Counts = 1807.031372, rescaling region sizes by 2.000000
[Fri Mar 16 16:54:59 2012] XMMSAS src. selection expression = ellipse(24753.172089, 12218.088470, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Mar 16 16:54:59 2012] Writing source region out to fullrun_pn_xmm0560180401_pi300-10000_pass1_cl_src1_src.reg
[Fri Mar 16 16:54:59 2012] Extracting stamp from image fullrun_pn_xmm0560180401_pi300-10000_cl_sm2.00.img.gz, (210, 66) - (360, 216)
[Fri Mar 16 16:54:59 2012] XMMSAS bgd. selection expression = annulus(24753.172089, 12218.088470, 4350.000000, 8700.000000, X, Y) && !ellipse(21734.519272, 11262.362885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18695.794000, 21147.823000, 370.085611, 370.085611, 0.000000, X, Y) && !ellipse(19566.847153, 21006.029678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26482.477631, 17815.288483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22525.621094, 11439.157303, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29072.713593, 13480.479233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28093.137878, 13228.434647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26880.222260, 12819.650406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20605.279556, 10859.877037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19419.710739, 11080.690514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32655.187103, 21744.340225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22486.363831, 20410.482712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18240.049362, 19428.157715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33929.595856, 17729.670425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29787.626220, 17014.066800, 470.534414, 470.534414, 0.000000, X, Y) && !ellipse(32917.740295, 16373.492081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30907.506280, 16380.673400, 750.362422, 750.362422, 0.000000, X, Y) && !ellipse(26215.041840, 14849.327377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30358.199127, 14404.798477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27926.181671, 13713.539032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23920.007965, 12068.362076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18837.620789, 11619.708588, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 16:54:59 2012] Writing fullrun_pn_xmm0560180401_pi300-10000_pass1_cl_src1.gif
[Fri Mar 16 16:56:12 2012] Mean detx,y = (-6263.71, 13899.51) 
[Fri Mar 16 16:56:21 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 16:59:12 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 16:59:12 2012] Setting source spectrum file to fullrun_pn_xmm0560180401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 16:59:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560180401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Mar 16 18:39:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 18:39:18 2012] rmf not generated due to insufficient counts
[Fri Mar 16 21:11:44 2012] Updating aperture counts using extracted products
[Fri Mar 16 21:11:44 2012] Error reading totcts from fullrun_pn_xmm0560180401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 21:11:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 21:11:47 2012] Using photon index=1.80, rate=0.0145, arf fullrun_pn_xmm0560180401_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 21:11:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 21:11:47 2012] Updating source flux to 1.6e-13
[Fri Mar 16 21:14:50 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Mar 16 21:19:03 2012] xmm0560180401/analysis//spectral/fullrun_pn_xmm0560180401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete