[Fri Mar 16 07:32:27 2012] Detection parameters:
  Position = (155.6, 221.9) = 16 36 55.90 -47 42 34.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 389.5 +/- 25.9
  Background counts = 45.1
  Rate = 0.003 +/- 0.0002

[Fri Mar 16 07:32:28 2012] Off-axis axis estimate = 11.75'
[Fri Mar 16 10:04:15 2012] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 10:04:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 16 10:04:15 2012] Initial guess for spatial extent in simple fitting = 12.30"
[Fri Mar 16 10:04:15 2012] source mask rpix=2.8, npix_max = 44, mask sum = 40, frac = 0.903
[Fri Mar 16 10:04:15 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 12.30"
[Fri Mar 16 10:41:36 2012] fullrun_mos1_xmm0560180401_pi300-10000_cl_pass0_src2.ximg exists
[Fri Mar 16 10:41:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180401_pi300-10000_cl_pass0_src2.csv
[Fri Mar 16 10:41:36 2012] fullrun_mos1_xmm0560180401_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Mar 16 10:41:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180401_pi300-10000_cl_pass0_src2.csv
[Fri Mar 16 10:41:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560180401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560180401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 16 10:41:36 2012] fullrun_mos1_xmm0560180401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Mar 16 10:41:36 2012] fullrun_mos1_xmm0560180401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Mar 16 10:41:36 2012] Fit fullrun_mos1_xmm0560180401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Mar 16 11:43:59 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 13.856415 pixels away
[Fri Mar 16 11:43:59 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 11:43:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 11:43:59 2012] Assessing source extent using major
[Fri Mar 16 11:43:59 2012] Source does appear to be extended
[Fri Mar 16 11:43:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 15:32:25 2012] Using EEF radius (= 12.30 ")to estimate initial spatial extent for simple fitting
[Fri Mar 16 15:32:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar 16 15:32:25 2012] Initial guess for spatial extent in simple fitting = 12.30"
[Fri Mar 16 15:32:25 2012] source mask rpix=2.8, npix_max = 44, mask sum = 40, frac = 0.903
[Fri Mar 16 15:32:25 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 12.30"
[Fri Mar 16 16:03:22 2012] fullrun_mos1_xmm0560180401_pi300-10000_cl_pass1_src2.ximg exists
[Fri Mar 16 16:03:22 2012] fullrun_mos1_xmm0560180401_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Mar 16 16:03:22 2012] Fit fullrun_mos1_xmm0560180401_pi300-10000_cl_pass1_src2 appears to have run properly
[Fri Mar 16 16:03:23 2012] fullrun_mos1_xmm0560180401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Mar 16 16:03:23 2012] fullrun_mos1_xmm0560180401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Mar 16 16:03:23 2012] Fit fullrun_mos1_xmm0560180401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Mar 16 16:54:39 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.467802 pixels away
[Fri Mar 16 16:54:39 2012] Vigneting correction estimate = 1.000000
[Fri Mar 16 16:54:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 16 16:54:39 2012] Assessing source extent using major
[Fri Mar 16 16:54:39 2012] Source does appear to be extended
[Fri Mar 16 16:54:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 20:03:44 2012] XMMSAS src. selection expression = ellipse(13488.342102, 19259.992142, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 16 20:03:44 2012] Writing source region out to fullrun_mos1_xmm0560180401_pi300-10000_pass1_cl_src1_src.reg
[Fri Mar 16 20:03:44 2012] Extracting stamp from image fullrun_mos1_xmm0560180401_pi300-10000_cl_sm2.00.img.gz, (118, 184) - (193, 259)
[Fri Mar 16 20:03:44 2012] XMMSAS bgd. selection expression = annulus(13488.342102, 19259.992142, 1087.500000, 2175.000000, X, Y) && !ellipse(14419.437732, 18381.018826, 799.957388, 266.377672, 66.465869, X, Y)
[Fri Mar 16 20:03:44 2012] Writing fullrun_mos1_xmm0560180401_pi300-10000_pass1_cl_src1.gif
[Fri Mar 16 20:04:46 2012] Mean detx,y = (-4072.78, -15173.67) 
[Fri Mar 16 20:04:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 20:05:04 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 20:05:04 2012] Setting source spectrum file to fullrun_mos1_xmm0560180401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 20:05:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560180401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Mar 16 20:18:59 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 20:18:59 2012] rmf not generated due to insufficient counts
[Fri Mar 16 21:11:49 2012] Updating aperture counts using extracted products
[Fri Mar 16 21:11:49 2012] Error reading totcts from fullrun_mos1_xmm0560180401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 21:11:50 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 21:11:50 2012] Using photon index=1.80, rate=0.00308, arf fullrun_mos1_xmm0560180401_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 21:11:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 21:11:50 2012] Updating source flux to 1.3e-13
[Fri Mar 16 21:11:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting