[Sun Feb  5 10:07:03 2012] Detection parameters:
  Position = (368.9, 291.9) = 0 42 44.90 41 14 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 310.7 +/- 29.8
  Background counts = 207.3
  Rate = 0.03 +/- 0.003

[Sun Feb  5 10:07:04 2012] Off-axis axis estimate = 5.13'
[Sun Feb  5 10:10:09 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:10:09 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Sun Feb  5 10:10:09 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.948
[Sun Feb  5 10:10:09 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 8.99"
[Sun Feb  5 13:45:33 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src57.ximg exists
[Sun Feb  5 13:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src57.csv
[Sun Feb  5 13:45:33 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src57_1.ximg exists
[Sun Feb  5 13:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src57.csv
[Sun Feb  5 13:45:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 13:45:35 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Sun Feb  5 13:45:35 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Sun Feb  5 13:45:35 2012] Fit fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Sun Feb  5 19:08:04 2012] Spatial fit model total counts = 2322.780000, observed total counts = 2322.000000
[Sun Feb  5 19:08:04 2012] Offset between fit and detection position for source 60 = 0.434601 pixels
[Sun Feb  5 19:08:04 2012] 2201.557000 total counts/ 2087.680000 bgd. counts: snr = 2.492321
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.434601 pixels
  Position = (368.9, 291.5) = 0 42 44.90 41 14 8.4
  Extent = 5.2 (3.9-7.2)", rotation angle = 0
  Source counts = 113.9 +/- 46.9
  Background counts = 2087.7
  Rate = 0.009 +/- 0.004
[Sun Feb  5 19:08:04 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 19:08:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 19:08:04 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 19:08:04 2012] Source does appear to be extended
[Sun Feb  5 19:08:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 19:08:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb  5 19:08:49 2012] Initial guess for spatial extent in simple fitting = 5.21"
[Sun Feb  5 19:08:49 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.040
[Sun Feb  5 19:08:49 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 5.21"
[Sun Feb  5 22:25:59 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_src54.ximg exists
[Sun Feb  5 22:25:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_src54.csv
[Sun Feb  5 22:25:59 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_src54_1.ximg exists
[Sun Feb  5 22:25:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_src54.csv
[Sun Feb  5 22:25:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 22:26:00 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Sun Feb  5 22:26:00 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Sun Feb  5 22:26:00 2012] Fit fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Mon Feb  6 03:00:54 2012] Spatial fit model total counts = 2170.990000, observed total counts = 2163.000000
[Mon Feb  6 03:00:54 2012] Offset between fit and detection position for source 60 = 0.074472 pixels
[Mon Feb  6 03:00:54 2012] 2138.636000 total counts/ 2030.730000 bgd. counts: snr = 2.394526
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.074472 pixels
  Position = (368.9, 291.5) = 0 42 44.89 41 14 8.7
  Extent = 4.9 (4.0-6.4)", rotation angle = 0
  Source counts = 107.9 +/- 46.2
  Background counts = 2030.7
  Rate = 0.008 +/- 0.003
[Mon Feb  6 03:00:54 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 03:00:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 03:00:54 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 03:00:54 2012] Source does appear to be extended
[Mon Feb  6 03:00:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 03:01:39 2012] XMMSAS src. selection expression = ellipse(32044.662800, 25313.893600, 291.621008, 291.621008, 0.000000, X, Y)
[Mon Feb  6 03:01:39 2012] Writing source region out to fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src60_src.reg
[Mon Feb  6 03:01:39 2012] Extracting stamp from image fullrun_pn_xmm0560180101_pi300-10000_cl_sm2.00.img.gz, (352, 275) - (386, 308)
[Mon Feb  6 03:01:39 2012] XMMSAS bgd. selection expression = annulus(32044.662800, 25313.893600, 486.035014, 972.070028, X, Y) && !ellipse(31273.724201, 26801.220184, 709.604510, 422.534497, 112.946317, X, Y) && !ellipse(32686.970000, 27477.336000, 1442.368042, 1442.368042, 0.000000, X, Y) && !ellipse(33498.655396, 26212.073517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32051.924622, 26848.770782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34303.144000, 26125.234000, 1570.080045, 1570.080045, 0.000000, X, Y) && !ellipse(33580.196000, 25604.327800, 1036.608030, 1036.608030, 0.000000, X, Y) && !ellipse(32654.803320, 26007.055600, 487.968014, 487.968014, 0.000000, X, Y) && !ellipse(33014.744600, 24481.868200, 616.854418, 463.978413, 106.578632, X, Y) && !ellipse(30444.476000, 25022.668000, 1361.664039, 1361.664039, 0.000000, X, Y)
[Mon Feb  6 03:01:39 2012] Writing fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src60.gif
[Mon Feb  6 03:56:02 2012] Mean detx,y = (-6809.46, 3647.23) 
[Mon Feb  6 03:56:04 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 03:56:13 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 03:56:13 2012] Setting source spectrum file to fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Feb  6 03:56:13 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Mon Feb  6 10:10:55 2012] Updating aperture counts using extracted products
[Mon Feb  6 10:10:55 2012] Error reading totcts from fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Feb  6 10:10:57 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 10:10:57 2012] Using photon index=1.80, rate=0.00812, arf fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src60.arf
[Mon Feb  6 10:10:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 10:10:57 2012] Updating source flux to 3.9e-14