[Sun Feb  5 10:07:02 2012] Detection parameters:
  Position = (335.3, 250.8) = 0 42 57.87 41 11 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1405.7 +/- 50.5
  Background counts = 168.7
  Rate = 0.07 +/- 0.003

[Sun Feb  5 10:07:04 2012] Off-axis axis estimate = 4.36'
[Sun Feb  5 10:10:09 2012] Using EEF radius (= 8.61 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:10:09 2012] Initial guess for spatial extent in simple fitting = 8.61"
[Sun Feb  5 10:10:09 2012] source mask rpix=2.0, npix_max = 24, mask sum = 14, frac = 0.569
[Sun Feb  5 10:10:09 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.61"
[Sun Feb  5 13:45:33 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src25.ximg exists
[Sun Feb  5 13:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src25.csv
[Sun Feb  5 13:45:33 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun Feb  5 13:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src25.csv
[Sun Feb  5 13:45:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 13:45:34 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun Feb  5 13:45:34 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun Feb  5 13:45:34 2012] Fit fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun Feb  5 19:08:04 2012] Spatial fit model total counts = 1593.380000, observed total counts = 1585.000000
[Sun Feb  5 19:08:04 2012] Offset between fit and detection position for source 27 = 1.154295 pixels
[Sun Feb  5 19:08:04 2012] 1617.376000 total counts/ 1070.910000 bgd. counts: snr = 16.698854
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 1.154295 pixels
  Position = (335.8, 249.8) = 0 42 57.66 41 11 7.4
  Extent = 4.7 (4.3-5.1)", rotation angle = 0
  Source counts = 546.5 +/- 40.2
  Background counts = 1070.9
  Rate = 0.04 +/- 0.003
[Sun Feb  5 19:08:04 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 19:08:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 19:08:04 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 19:08:04 2012] Source does appear to be extended
[Sun Feb  5 19:08:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 19:08:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb  5 19:08:49 2012] Initial guess for spatial extent in simple fitting = 4.70"
[Sun Feb  5 19:08:49 2012] source mask rpix=1.1, npix_max = 10, mask sum = 2, frac = 0.200
[Sun Feb  5 19:08:49 2012] Skipping simple spatial due to low active detector fraction
[Mon Feb  6 03:00:54 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 03:00:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 03:00:54 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 03:00:54 2012] Source does appear to be extended
[Mon Feb  6 03:00:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 03:01:38 2012] XMMSAS src. selection expression = ellipse(29167.624800, 21684.635800, 282.245408, 282.245408, 0.000000, X, Y)
[Mon Feb  6 03:01:38 2012] Writing source region out to fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src27_src.reg
[Mon Feb  6 03:01:38 2012] Extracting stamp from image fullrun_pn_xmm0560180101_pi300-10000_cl_sm2.00.img.gz, (320, 234) - (352, 266)
[Mon Feb  6 03:01:38 2012] XMMSAS bgd. selection expression = annulus(29167.624800, 21684.635800, 470.409014, 940.818027, X, Y) && !ellipse(27969.542480, 20618.366200, 470.089614, 470.089614, 0.000000, X, Y)
[Mon Feb  6 03:01:38 2012] Writing fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src27.gif
[Mon Feb  6 03:30:05 2012] Mean detx,y = (-5848.91, -858.16) 
[Mon Feb  6 03:30:07 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 03:30:22 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 03:30:23 2012] Setting source spectrum file to fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon Feb  6 03:30:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon Feb  6 10:10:55 2012] Updating aperture counts using extracted products
[Mon Feb  6 10:10:55 2012] Error reading totcts from fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon Feb  6 10:10:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 10:10:56 2012] Using photon index=1.80, rate=0.0411, arf fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src27.arf
[Mon Feb  6 10:10:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 10:10:56 2012] Updating source flux to 2.6e-13