[Sun Feb  5 10:07:01 2012] Detection parameters:
  Position = (430.0, 317.0) = 0 42 21.28 41 16 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 837.0 +/- 40.2
  Background counts = 138.1
  Rate = 0.04 +/- 0.002

[Sun Feb  5 10:07:04 2012] Off-axis axis estimate = 9.64'
[Sun Feb  5 10:10:09 2012] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:10:09 2012] Initial guess for spatial extent in simple fitting = 11.25"
[Sun Feb  5 10:10:09 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.945
[Sun Feb  5 10:10:09 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 11.25"
[Sun Feb  5 13:45:33 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src19.ximg exists
[Sun Feb  5 13:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src19.csv
[Sun Feb  5 13:45:33 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sun Feb  5 13:45:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src19.csv
[Sun Feb  5 13:45:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 13:45:34 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sun Feb  5 13:45:34 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sun Feb  5 13:45:34 2012] Fit fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sun Feb  5 19:08:04 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 15.344318 pixels away
[Sun Feb  5 19:08:04 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 19:08:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 19:08:04 2012] Assessing source extent using major
[Sun Feb  5 19:08:04 2012] Source does appear to be extended
[Sun Feb  5 19:08:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 19:08:04 2012] Source is confused with source 11
[Sun Feb  5 19:08:49 2012] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 19:08:49 2012] Initial guess for spatial extent in simple fitting = 11.25"
[Sun Feb  5 19:08:49 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.945
[Sun Feb  5 19:08:49 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 11.25"
[Sun Feb  5 22:25:58 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_src18.ximg exists
[Sun Feb  5 22:25:58 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun Feb  5 22:25:58 2012] Fit fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_src18 appears to have run properly
[Sun Feb  5 22:26:00 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun Feb  5 22:26:00 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Feb  5 22:26:00 2012] Fit fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Mon Feb  6 03:00:54 2012] Spatial fit model total counts = 2379.440000, observed total counts = 2393.000000
[Mon Feb  6 03:00:54 2012] Offset between fit and detection position for source 20 = 8.538688 pixels
[Mon Feb  6 03:00:54 2012] 2017.952000 total counts/ 829.562000 bgd. counts: snr = 41.260507
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 8.538688 pixels
  Position = (435.2, 323.8) = 0 42 19.28 41 16 28.8
  Extent = 22.5 (22.0-45.0)", rotation angle = 0
  Source counts = 1188.4 +/- 44.9
  Background counts = 829.6
  Rate = 0.09 +/- 0.003
[Mon Feb  6 03:00:54 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 03:00:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 03:00:54 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 03:00:54 2012] Source does appear to be extended
[Mon Feb  6 03:00:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 03:01:38 2012] Counts = 1188.390000, rescaling region sizes by 2.000000
[Mon Feb  6 03:01:38 2012] XMMSAS src. selection expression = ellipse(37815.792000, 28125.578000, 2699.256078, 2699.256078, 0.000000, X, Y)
[Mon Feb  6 03:01:38 2012] Writing source region out to fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src20_src.reg
[Mon Feb  6 03:01:38 2012] Extracting stamp from image fullrun_pn_xmm0560180101_pi300-10000_cl_sm2.00.img.gz, (280, 169) - (590, 479)
[Mon Feb  6 03:01:38 2012] XMMSAS bgd. selection expression = annulus(37815.792000, 28125.578000, 8997.520259, 17995.040518, X, Y) && !ellipse(27966.447472, 26839.200040, 401.240012, 401.240012, 0.000000, X, Y) && !ellipse(31273.724201, 26801.220184, 709.604510, 422.534497, 112.946317, X, Y) && !ellipse(33435.654000, 27579.910000, 517.560015, 517.560015, 0.000000, X, Y) && !ellipse(30335.032800, 27124.939400, 395.911211, 395.911211, 0.000000, X, Y) && !ellipse(32151.023360, 27805.365860, 734.229621, 734.229621, 0.000000, X, Y) && !ellipse(30333.003420, 31019.693200, 446.531213, 446.531213, 0.000000, X, Y) && !ellipse(32205.432000, 27678.754000, 423.415212, 423.415212, 0.000000, X, Y) && !ellipse(28687.034000, 27615.682000, 369.927211, 369.927211, 0.000000, X, Y) && !ellipse(35167.260400, 27975.959000, 441.386413, 441.386413, 0.000000, X, Y) && !ellipse(37040.212250, 27024.528412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20281.101000, 26072.555200, 377.024811, 377.024811, 0.000000, X, Y) && !ellipse(26256.964600, 26146.289000, 444.871213, 444.871213, 0.000000, X, Y) && !ellipse(35706.998000, 24297.128000, 1742.208050, 1742.208050, 0.000000, X, Y) && !ellipse(35828.223236, 23188.228790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39220.964666, 30659.658070, 715.136021, 321.331546, 74.393501, X, Y) && !ellipse(40448.863600, 30200.585600, 417.646412, 417.646412, 0.000000, X, Y) && !ellipse(27790.648616, 30028.948200, 408.892812, 408.892812, 0.000000, X, Y) && !ellipse(31980.124840, 29213.772800, 625.466418, 625.466418, 0.000000, X, Y) && !ellipse(32686.970000, 27477.336000, 1442.368042, 1442.368042, 0.000000, X, Y) && !ellipse(33498.655396, 26212.073517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38010.312164, 25180.992889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37142.022874, 24619.241243, 571.803086, 277.074337, 92.580876, X, Y) && !ellipse(32070.256280, 22290.549200, 562.811216, 393.148011, 102.987300, X, Y) && !ellipse(29167.624800, 21684.635800, 376.327211, 376.327211, 0.000000, X, Y) && !ellipse(35651.508200, 13832.909800, 398.935211, 398.935211, 0.000000, X, Y) && !ellipse(21330.597600, 21157.407600, 400.884812, 400.884812, 0.000000, X, Y) && !ellipse(31833.304199, 21071.449600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35852.272491, 20321.977310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22068.383896, 17695.253281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25400.638153, 17162.407486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28746.622894, 31520.034637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27938.479767, 33964.066101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26938.233820, 32737.986800, 324.698409, 324.698409, 0.000000, X, Y) && !ellipse(34233.504940, 32449.108000, 518.600815, 246.180007, 60.312300, X, Y) && !ellipse(35155.080383, 31894.537140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36322.241882, 31423.285370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33009.402400, 30649.273400, 1582.272046, 562.828816, 114.583000, X, Y) && !ellipse(22341.115600, 30539.243200, 570.734416, 570.734416, 0.000000, X, Y) && !ellipse(32901.796844, 30406.974670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39470.126923, 29987.134888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23881.066160, 29751.342200, 429.307212, 429.307212, 0.000000, X, Y) && !ellipse(39899.926000, 29079.614000, 1972.104057, 1972.104057, 0.000000, X, Y) && !ellipse(31136.234400, 29558.449400, 575.312017, 575.312017, 0.000000, X, Y) && !ellipse(29902.592000, 28946.106000, 1630.656047, 1630.656047, 0.000000, X, Y) && !ellipse(39542.526917, 28489.023987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34542.695600, 27922.299000, 311.596009, 311.596009, 0.000000, X, Y) && !ellipse(29661.992035, 27808.293060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27720.414246, 27575.723114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34232.271851, 26997.035583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29067.459290, 26929.935028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32051.924622, 26848.770782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34303.144000, 26125.234000, 1570.080045, 1570.080045, 0.000000, X, Y) && !ellipse(33580.196000, 25604.327800, 1036.608030, 1036.608030, 0.000000, X, Y) && !ellipse(32654.803320, 26007.055600, 487.968014, 487.968014, 0.000000, X, Y) && !ellipse(36980.221800, 25291.053800, 328.009609, 328.009609, 0.000000, X, Y) && !ellipse(32044.662800, 25313.893600, 388.828011, 388.828011, 0.000000, X, Y) && !ellipse(34775.530670, 12494.811554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33014.744600, 24481.868200, 616.854418, 463.978413, 106.578632, X, Y) && !ellipse(20920.845500, 24398.653200, 414.655212, 414.655212, 0.000000, X, Y) && !ellipse(26677.564900, 23675.062800, 474.151214, 474.151214, 0.000000, X, Y) && !ellipse(24999.649078, 12925.990967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38381.192000, 23153.316000, 1904.424055, 1904.424055, 0.000000, X, Y) && !ellipse(39569.892303, 21277.375000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35156.658600, 13836.281600, 503.780014, 503.780014, 0.000000, X, Y) && !ellipse(27969.542480, 20618.366200, 470.089614, 470.089614, 0.000000, X, Y) && !ellipse(30290.742800, 29622.944000, 815.328023, 815.328023, 0.000000, X, Y) && !ellipse(32755.510040, 29513.958221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29342.184432, 28863.244978, 1536.888044, 1536.888044, 0.000000, X, Y) && !ellipse(30444.476000, 25022.668000, 1361.664039, 1361.664039, 0.000000, X, Y) && !ellipse(36570.917236, 24772.840546, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb  6 03:01:38 2012] Writing fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src20.gif
[Mon Feb  6 03:17:41 2012] Mean detx,y = (-10443.92, 8445.88) 
[Mon Feb  6 03:17:44 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 03:22:25 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 03:22:25 2012] Setting source spectrum file to fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Feb  6 03:22:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Mon Feb  6 10:10:55 2012] Updating aperture counts using extracted products
[Mon Feb  6 10:10:55 2012] Error reading totcts from fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Mon Feb  6 10:10:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 10:10:56 2012] Using photon index=1.80, rate=0.0894, arf fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src20.arf
[Mon Feb  6 10:10:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 10:10:56 2012] Updating source flux to 4.5e-13
[Mon Feb  6 10:17:50 2012] Flag c found in src. 20 procflags, skipping spectral fitting