[Sun Feb  5 10:07:01 2012] Detection parameters:
  Position = (302.5, 301.1) = 0 43 10.51 41 14 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5678.2 +/- 93.1
  Background counts = 190.0
  Rate = 0.4 +/- 0.006

[Sun Feb  5 10:07:04 2012] Off-axis axis estimate = 0.35'
[Sun Feb  5 10:10:09 2012] Using EEF radius (= 6.60 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 10:10:09 2012] Initial guess for spatial extent in simple fitting = 6.60"
[Sun Feb  5 10:10:09 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.982
[Sun Feb  5 10:10:09 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 6.60"
[Sun Feb  5 13:45:32 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src12.ximg exists
[Sun Feb  5 13:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src12.csv
[Sun Feb  5 13:45:32 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Feb  5 13:45:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src12.csv
[Sun Feb  5 13:45:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 13:45:34 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Feb  5 13:45:34 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Feb  5 13:45:34 2012] Fit fullrun_pn_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Feb  5 19:08:04 2012] Spatial fit model total counts = 4649.000000, observed total counts = 4649.000000
[Sun Feb  5 19:08:04 2012] Offset between fit and detection position for source 13 = 0.103079 pixels
[Sun Feb  5 19:08:04 2012] 4652.840000 total counts/ 1914.120000 bgd. counts: snr = 62.598374
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.103079 pixels
  Position = (302.4, 301.1) = 0 43 10.55 41 14 50.5
  Extent = 5.5 (5.4-5.7)", rotation angle = 0
  Source counts = 2738.7 +/- 68.2
  Background counts = 1914.1
  Rate = 0.2 +/- 0.005
[Sun Feb  5 19:08:04 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 19:08:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 19:08:04 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 19:08:04 2012] Source does appear to be extended
[Sun Feb  5 19:08:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 19:08:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb  5 19:08:49 2012] Initial guess for spatial extent in simple fitting = 5.55"
[Sun Feb  5 19:08:49 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.952
[Sun Feb  5 19:08:49 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 5.55"
[Sun Feb  5 22:25:58 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_src11.ximg exists
[Sun Feb  5 22:25:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_src11.csv
[Sun Feb  5 22:25:58 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Feb  5 22:25:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_src11.csv
[Sun Feb  5 22:25:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 22:25:59 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Feb  5 22:25:59 2012] fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Feb  5 22:25:59 2012] Fit fullrun_pn_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Feb  6 03:00:54 2012] Spatial fit model total counts = 4648.740000, observed total counts = 4649.000000
[Mon Feb  6 03:00:54 2012] Offset between fit and detection position for source 13 = 0.000085 pixels
[Mon Feb  6 03:00:54 2012] 4652.540000 total counts/ 1910.880000 bgd. counts: snr = 62.718677
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.000085 pixels
  Position = (302.4, 301.1) = 0 43 10.55 41 14 50.5
  Extent = 5.6 (5.4-5.8)", rotation angle = 0
  Source counts = 2741.7 +/- 68.2
  Background counts = 1910.9
  Rate = 0.2 +/- 0.005
[Mon Feb  6 03:00:54 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 03:00:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 03:00:54 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 03:00:54 2012] Source does appear to be extended
[Mon Feb  6 03:00:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 03:01:37 2012] Counts = 2741.660000, rescaling region sizes by 2.000000
[Mon Feb  6 03:01:37 2012] XMMSAS src. selection expression = ellipse(26256.964600, 26146.289000, 667.306819, 667.306819, 0.000000, X, Y)
[Mon Feb  6 03:01:37 2012] Writing source region out to fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src13_src.reg
[Mon Feb  6 03:01:37 2012] Extracting stamp from image fullrun_pn_xmm0560180101_pi300-10000_cl_sm2.00.img.gz, (264, 263) - (341, 339)
[Mon Feb  6 03:01:37 2012] XMMSAS bgd. selection expression = annulus(26256.964600, 26146.289000, 2224.356064, 4448.712128, X, Y) && !ellipse(27966.447472, 26839.200040, 401.240012, 401.240012, 0.000000, X, Y) && !ellipse(31273.724201, 26801.220184, 709.604510, 422.534497, 112.946317, X, Y) && !ellipse(30335.032800, 27124.939400, 395.911211, 395.911211, 0.000000, X, Y) && !ellipse(30333.003420, 31019.693200, 446.531213, 446.531213, 0.000000, X, Y) && !ellipse(28687.034000, 27615.682000, 369.927211, 369.927211, 0.000000, X, Y) && !ellipse(27790.648616, 30028.948200, 408.892812, 408.892812, 0.000000, X, Y) && !ellipse(29167.624800, 21684.635800, 376.327211, 376.327211, 0.000000, X, Y) && !ellipse(22341.115600, 30539.243200, 570.734416, 570.734416, 0.000000, X, Y) && !ellipse(23881.066160, 29751.342200, 429.307212, 429.307212, 0.000000, X, Y) && !ellipse(31136.234400, 29558.449400, 575.312017, 575.312017, 0.000000, X, Y) && !ellipse(29902.592000, 28946.106000, 1630.656047, 1630.656047, 0.000000, X, Y) && !ellipse(29661.992035, 27808.293060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27720.414246, 27575.723114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29067.459290, 26929.935028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26677.564900, 23675.062800, 474.151214, 474.151214, 0.000000, X, Y) && !ellipse(30290.742800, 29622.944000, 815.328023, 815.328023, 0.000000, X, Y) && !ellipse(29342.184432, 28863.244978, 1536.888044, 1536.888044, 0.000000, X, Y) && !ellipse(30444.476000, 25022.668000, 1361.664039, 1361.664039, 0.000000, X, Y)
[Mon Feb  6 03:01:37 2012] Writing fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src13.gif
[Mon Feb  6 03:12:13 2012] Mean detx,y = (-1258.99, 1832.18) 
[Mon Feb  6 03:12:15 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 03:12:44 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 03:12:44 2012] Setting source spectrum file to fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Feb  6 03:12:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Mon Feb  6 10:10:55 2012] Updating aperture counts using extracted products
[Mon Feb  6 10:10:55 2012] Error reading totcts from fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Mon Feb  6 10:10:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 10:10:56 2012] Using photon index=1.80, rate=0.206, arf fullrun_pn_xmm0560180101_pi300-10000_pass1_cl_src13.arf
[Mon Feb  6 10:10:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 10:10:56 2012] Updating source flux to 5.8e-13