[Sun Feb  5 10:07:12 2012] Detection parameters:
  Position = (349.3, 327.9) = 0 42 52.42 41 16 47.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.1 +/- 19.1
  Background counts = 49.6
  Rate = 0.01 +/- 0.001

[Sun Feb  5 10:07:14 2012] Off-axis axis estimate = 4.26'
[Sun Feb  5 16:05:16 2012] Using EEF radius (= 8.56 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 16:05:16 2012] Initial guess for spatial extent in simple fitting = 8.56"
[Sun Feb  5 16:05:16 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.026
[Sun Feb  5 16:05:16 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 8.56"
[Sun Feb  5 19:07:44 2012] fullrun_mos2_xmm0560180101_pi300-10000_cl_pass0_src45.ximg exists
[Sun Feb  5 19:07:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180101_pi300-10000_cl_pass0_src45.csv
[Sun Feb  5 19:07:44 2012] fullrun_mos2_xmm0560180101_pi300-10000_cl_pass0_src45_1.ximg exists
[Sun Feb  5 19:07:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0560180101_pi300-10000_cl_pass0_src45.csv
[Sun Feb  5 19:07:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0560180101_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0560180101_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 19:07:46 2012] fullrun_mos2_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Sun Feb  5 19:07:46 2012] fullrun_mos2_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Sun Feb  5 19:07:46 2012] Fit fullrun_mos2_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Sun Feb  5 19:08:29 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 43 at 10.046497 pixels away
[Sun Feb  5 19:08:29 2012] Spatial fit model total counts = 1747.920000, observed total counts = 1740.000000
[Sun Feb  5 19:08:29 2012] Offset between fit and detection position for source 43 = 5.221972 pixels
[Sun Feb  5 19:08:29 2012] Warning, changing simple spatial fit ID from 45 to 65
[Sun Feb  5 19:08:29 2012] 1196.550000 total counts/ 561.413000 bgd. counts: snr = 26.805640
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 5.221972 pixels
  Position = (351.0, 332.9) = 0 42 51.77 41 17 8.7
  Extent = 17.6 (17.6-17.6)", rotation angle = 0
  Source counts = 635.1 +/- 34.6
  Background counts = 561.4
  Rate = 0.03 +/- 0.002
[Sun Feb  5 19:08:29 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 19:08:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 19:08:29 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 19:08:29 2012] Source does appear to be extended
[Sun Feb  5 19:08:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 19:08:29 2012] Source is confused with source 74
[Mon Feb  6 00:40:42 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Feb  6 00:40:42 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb  6 00:40:42 2012] Initial guess for spatial extent in simple fitting = 17.61"
[Mon Feb  6 00:40:42 2012] source mask rpix=4.0, npix_max = 82, mask sum = 74, frac = 0.894
[Mon Feb  6 00:40:42 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 17.61"
[Mon Feb  6 03:00:38 2012] fullrun_mos2_xmm0560180101_pi300-10000_cl_pass1_src45.ximg exists
[Mon Feb  6 03:00:38 2012] fullrun_mos2_xmm0560180101_pi300-10000_cl_pass1_src45_1.ximg exists
[Mon Feb  6 03:00:38 2012] Fit fullrun_mos2_xmm0560180101_pi300-10000_cl_pass1_src45 appears to have run properly
[Mon Feb  6 03:00:39 2012] fullrun_mos2_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Mon Feb  6 03:00:39 2012] fullrun_mos2_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Mon Feb  6 03:00:39 2012] Fit fullrun_mos2_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Mon Feb  6 03:01:18 2012] Spatial fit model total counts = 4032.570000, observed total counts = 4031.000000
[Mon Feb  6 03:01:18 2012] Offset between fit and detection position for source 43 = 6.124865 pixels
[Mon Feb  6 03:01:18 2012] Warning, changing simple spatial fit ID from 45 to 9
[Mon Feb  6 03:01:18 2012] 4021.505000 total counts/ 3724.310000 bgd. counts: snr = 4.869884
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 6.124865 pixels
  Position = (355.8, 329.1) = 0 42 49.92 41 16 52.1
  Extent = 17.9 (17.8-35.8)", rotation angle = 0
  Source counts = 297.2 +/- 63.4
  Background counts = 3724.3
  Rate = 0.01 +/- 0.003
[Mon Feb  6 03:01:18 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 03:01:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 03:01:18 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 03:01:18 2012] Source does appear to be extended
[Mon Feb  6 03:01:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 07:32:32 2012] XMMSAS src. selection expression = ellipse(30906.282000, 28580.972000, 1073.412031, 1073.412031, 0.000000, X, Y)
[Mon Feb  6 07:32:32 2012] Writing source region out to fullrun_mos2_xmm0560180101_pi300-10000_pass1_cl_src43_src.reg
[Mon Feb  6 07:32:32 2012] Extracting stamp from image fullrun_mos2_xmm0560180101_pi300-10000_cl_sm2.00.img.gz, (294, 267) - (417, 391)
[Mon Feb  6 07:32:32 2012] XMMSAS bgd. selection expression = annulus(30906.282000, 28580.972000, 1789.020051, 3578.040103, X, Y) && !ellipse(33475.210000, 27576.326200, 626.960018, 626.960018, 0.000000, X, Y) && !ellipse(31254.744000, 26759.808020, 387.199211, 387.199211, 0.000000, X, Y) && !ellipse(27947.858440, 26854.599600, 430.791212, 430.791212, 0.000000, X, Y) && !ellipse(29803.868340, 27583.972400, 376.603211, 376.603211, 0.000000, X, Y) && !ellipse(32463.570000, 27598.996000, 1233.320035, 1233.320035, 0.000000, X, Y) && !ellipse(30386.620000, 31052.590000, 545.101616, 545.101616, 0.000000, X, Y) && !ellipse(31980.134000, 27804.335400, 1270.960037, 1270.960037, 0.000000, X, Y) && !ellipse(30344.605600, 27117.943600, 316.254409, 265.916808, 251.930000, X, Y) && !ellipse(28684.502600, 27640.420800, 364.355210, 364.355210, 0.000000, X, Y) && !ellipse(28724.591400, 31538.357400, 581.090417, 428.387212, 29.902000, X, Y) && !ellipse(27799.465666, 30006.041448, 408.910375, 341.722322, 25.175347, X, Y) && !ellipse(31923.805600, 29219.387600, 533.399215, 533.399215, 0.000000, X, Y) && !ellipse(34519.389374, 27896.894043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31923.272000, 26706.790000, 771.945622, 771.945622, 0.000000, X, Y) && !ellipse(33109.460000, 30842.010000, 412.789612, 412.789612, 0.000000, X, Y) && !ellipse(32667.176000, 26041.322000, 442.311213, 442.311213, 0.000000, X, Y) && !ellipse(30954.452000, 30374.984000, 2143.320062, 2143.320062, 0.000000, X, Y) && !ellipse(35139.187378, 31898.973694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32527.777557, 28719.621246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33314.237061, 25647.502777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29062.916534, 26932.417480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29715.517426, 30668.787109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34260.019562, 32462.684204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33216.306000, 28527.778000, 1507.392043, 1507.392043, 0.000000, X, Y) && !ellipse(32327.540000, 29693.828000, 1579.560045, 1579.560045, 0.000000, X, Y) && !ellipse(30592.494843, 28038.614197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27725.092407, 27512.066132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33327.849396, 28924.634644, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb  6 07:32:32 2012] Writing fullrun_mos2_xmm0560180101_pi300-10000_pass1_cl_src43.gif
[Mon Feb  6 07:44:47 2012] Mean detx,y = (4731.37, -6048.90) 
[Mon Feb  6 07:44:49 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 07:45:07 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 07:45:07 2012] Setting source spectrum file to fullrun_mos2_xmm0560180101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon Feb  6 07:45:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0560180101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Mon Feb  6 10:10:58 2012] Updating aperture counts using extracted products
[Mon Feb  6 10:10:58 2012] Error reading totcts from fullrun_mos2_xmm0560180101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon Feb  6 10:10:59 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 10:10:59 2012] Using photon index=1.80, rate=0.0137, arf fullrun_mos2_xmm0560180101_pi300-10000_pass1_cl_src43.arf
[Mon Feb  6 10:10:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 10:10:59 2012] Updating source flux to 1.9e-13
[Mon Feb  6 10:13:55 2012] Flag c found in src. 43 procflags, skipping spectral fitting