[Sun Feb  5 10:07:08 2012] Detection parameters:
  Position = (354.2, 241.9) = 0 42 50.57 41 10 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.7 +/- 10.6
  Background counts = 25.6
  Rate = 0.003 +/- 0.0008

[Sun Feb  5 10:07:08 2012] Off-axis axis estimate = 5.76'
[Sun Feb  5 13:45:35 2012] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 13:45:35 2012] Initial guess for spatial extent in simple fitting = 9.31"
[Sun Feb  5 13:45:35 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.076
[Sun Feb  5 13:45:35 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 9.31"
[Sun Feb  5 16:05:15 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_src55.ximg exists
[Sun Feb  5 16:05:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_src55.csv
[Sun Feb  5 16:05:15 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_src55_1.ximg exists
[Sun Feb  5 16:05:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_src55.csv
[Sun Feb  5 16:05:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 16:05:16 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sun Feb  5 16:05:16 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sun Feb  5 16:05:16 2012] Fit fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Sun Feb  5 19:08:16 2012] Spatial fit model total counts = 315.515000, observed total counts = 315.000000
[Sun Feb  5 19:08:16 2012] Offset between fit and detection position for source 60 = 4.073405 pixels
[Sun Feb  5 19:08:16 2012] 311.401000 total counts/ 174.434000 bgd. counts: snr = 10.370516
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 4.073405 pixels
  Position = (357.9, 240.2) = 0 42 49.14 41 10 25.6
  Extent = 18.6 (18.6-37.2)", rotation angle = 0
  Source counts = 137.0 +/- 17.6
  Background counts = 174.4
  Rate = 0.006 +/- 0.0008
[Sun Feb  5 19:08:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 19:08:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 19:08:16 2012] Assessing source extent using major axis lower bound
[Sun Feb  5 19:08:16 2012] Source does appear to be extended
[Sun Feb  5 19:08:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 19:08:16 2012] Source is confused with source 24
[Sun Feb  5 22:26:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Feb  5 22:26:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb  5 22:26:01 2012] Initial guess for spatial extent in simple fitting = 18.62"
[Sun Feb  5 22:26:01 2012] source mask rpix=4.3, npix_max = 91, mask sum = 100, frac = 1.094
[Sun Feb  5 22:26:01 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 18.62"
[Mon Feb  6 00:40:42 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_src54.ximg exists
[Mon Feb  6 00:40:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_src54.csv
[Mon Feb  6 00:40:42 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_src54_1.ximg exists
[Mon Feb  6 00:40:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_src54.csv
[Mon Feb  6 00:40:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 00:40:42 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Mon Feb  6 00:40:42 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Mon Feb  6 00:40:42 2012] Fit fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Mon Feb  6 03:01:04 2012] Warning, spatial fit 54 centroid is now closest to src. 61
[Mon Feb  6 03:01:04 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 03:01:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 03:01:04 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 03:01:04 2012] Source does appear to be extended
[Mon Feb  6 03:01:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 05:45:42 2012] XMMSAS src. selection expression = ellipse(31090.522000, 20850.920000, 1116.906032, 1116.906032, 0.000000, X, Y)
[Mon Feb  6 05:45:42 2012] Writing source region out to fullrun_mos1_xmm0560180101_pi300-10000_pass1_cl_src60_src.reg
[Mon Feb  6 05:45:42 2012] Extracting stamp from image fullrun_mos1_xmm0560180101_pi300-10000_cl_sm2.00.img.gz, (294, 176) - (422, 304)
[Mon Feb  6 05:45:42 2012] XMMSAS bgd. selection expression = annulus(31090.522000, 20850.920000, 1861.510054, 3723.020107, X, Y) && !ellipse(29133.693200, 21619.655600, 408.002412, 408.002412, 0.000000, X, Y) && !ellipse(31838.300964, 21013.928391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34964.277200, 24229.781800, 580.341617, 580.341617, 0.000000, X, Y) && !ellipse(32120.546509, 22310.130951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33037.337000, 24472.299200, 519.753615, 519.753615, 0.000000, X, Y) && !ellipse(27969.633881, 20642.513687, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb  6 05:45:42 2012] Writing fullrun_mos1_xmm0560180101_pi300-10000_pass1_cl_src60.gif
[Mon Feb  6 06:02:22 2012] Mean detx,y = (589.60, -8495.82) 
[Mon Feb  6 06:02:23 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 06:02:50 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 06:02:50 2012] Setting source spectrum file to fullrun_mos1_xmm0560180101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Feb  6 06:02:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560180101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Mon Feb  6 10:10:57 2012] Updating aperture counts using extracted products
[Mon Feb  6 10:10:57 2012] Error reading totcts from fullrun_mos1_xmm0560180101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Mon Feb  6 10:10:58 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 10:10:58 2012] Using photon index=1.80, rate=0.00634, arf fullrun_mos1_xmm0560180101_pi300-10000_pass1_cl_src60.arf
[Mon Feb  6 10:10:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 10:10:58 2012] Updating source flux to 9.3e-14
[Mon Feb  6 10:11:01 2012] Flag c found in src. 60 procflags, skipping spectral fitting