[Sun Feb  5 10:07:07 2012] Detection parameters:
  Position = (411.1, 160.1) = 0 42 28.70 41 4 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.4 +/- 17.7
  Background counts = 18.5
  Rate = 0.009 +/- 0.0008

[Sun Feb  5 10:07:08 2012] Off-axis axis estimate = 12.93'
[Sun Feb  5 13:45:35 2012] Using EEF radius (= 12.90 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 13:45:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Feb  5 13:45:35 2012] Initial guess for spatial extent in simple fitting = 12.90"
[Sun Feb  5 13:45:35 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.021
[Sun Feb  5 13:45:35 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 12.90"
[Sun Feb  5 16:05:15 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_src37.ximg exists
[Sun Feb  5 16:05:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_src37.csv
[Sun Feb  5 16:05:15 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_src37_1.ximg exists
[Sun Feb  5 16:05:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_src37.csv
[Sun Feb  5 16:05:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Feb  5 16:05:16 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sun Feb  5 16:05:16 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sun Feb  5 16:05:16 2012] Fit fullrun_mos1_xmm0560180101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Sun Feb  5 19:08:16 2012] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 32 at 14.453795 pixels away
[Sun Feb  5 19:08:16 2012] Vigneting correction estimate = 1.000000
[Sun Feb  5 19:08:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Feb  5 19:08:16 2012] Assessing source extent using major
[Sun Feb  5 19:08:16 2012] Source does appear to be extended
[Sun Feb  5 19:08:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb  5 22:26:01 2012] Using EEF radius (= 12.90 ")to estimate initial spatial extent for simple fitting
[Sun Feb  5 22:26:01 2012] Initial guess for spatial extent in simple fitting = 12.90"
[Sun Feb  5 22:26:01 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.021
[Sun Feb  5 22:26:01 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 12.90"
[Mon Feb  6 00:40:42 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_src37.ximg exists
[Mon Feb  6 00:40:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_src37.csv
[Mon Feb  6 00:40:42 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_src37_1.ximg exists
[Mon Feb  6 00:40:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_src37.csv
[Mon Feb  6 00:40:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb  6 00:40:42 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Mon Feb  6 00:40:42 2012] fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Feb  6 00:40:42 2012] Fit fullrun_mos1_xmm0560180101_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Mon Feb  6 03:01:04 2012] Spatial fit model total counts = 412.080000, observed total counts = 412.000000
[Mon Feb  6 03:01:04 2012] Offset between fit and detection position for source 32 = 0.204617 pixels
[Mon Feb  6 03:01:04 2012] 411.427000 total counts/ 295.619000 bgd. counts: snr = 6.735540
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 0.204617 pixels
  Position = (411.2, 160.3) = 0 42 28.68 41 4 37.7
  Extent = 5.9 (4.6-7.4)", rotation angle = 0
  Source counts = 115.8 +/- 20.3
  Background counts = 295.6
  Rate = 0.005 +/- 0.0009
[Mon Feb  6 03:01:04 2012] Vigneting correction estimate = 1.000000
[Mon Feb  6 03:01:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb  6 03:01:04 2012] Assessing source extent using major axis lower bound
[Mon Feb  6 03:01:04 2012] Source does appear to be extended
[Mon Feb  6 03:01:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb  6 05:45:42 2012] XMMSAS src. selection expression = ellipse(35726.716160, 13899.492600, 352.391410, 352.391410, 0.000000, X, Y)
[Mon Feb  6 05:45:42 2012] Writing source region out to fullrun_mos1_xmm0560180101_pi300-10000_pass1_cl_src32_src.reg
[Mon Feb  6 05:45:42 2012] Extracting stamp from image fullrun_mos1_xmm0560180101_pi300-10000_cl_sm2.00.img.gz, (391, 140) - (431, 181)
[Mon Feb  6 05:45:42 2012] XMMSAS bgd. selection expression = annulus(35726.716160, 13899.492600, 587.319017, 1174.638034, X, Y)
[Mon Feb  6 05:45:42 2012] Writing fullrun_mos1_xmm0560180101_pi300-10000_pass1_cl_src32.gif
[Mon Feb  6 05:58:31 2012] Mean detx,y = (4964.20, -15509.49) 
[Mon Feb  6 05:58:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb  6 05:58:36 2012] Binned source spectrum to 10 counts/bin
[Mon Feb  6 05:58:37 2012] Setting source spectrum file to fullrun_mos1_xmm0560180101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Feb  6 05:58:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0560180101_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Mon Feb  6 10:10:57 2012] Updating aperture counts using extracted products
[Mon Feb  6 10:10:57 2012] Error reading totcts from fullrun_mos1_xmm0560180101_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Mon Feb  6 10:10:58 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb  6 10:10:58 2012] Using photon index=1.80, rate=0.00536, arf fullrun_mos1_xmm0560180101_pi300-10000_pass1_cl_src32.arf
[Mon Feb  6 10:10:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb  6 10:10:58 2012] Updating source flux to 2.2e-13