[Fri Jul 13 18:37:36 2012] Detection parameters:
  Position = (240.4, 245.9) = 11 42 29.37 26 40 12.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1244.9 +/- 42.4
  Background counts = 37.7
  Rate = 0.06 +/- 0.002

[Fri Jul 13 18:37:37 2012] Off-axis axis estimate = 5.68'
[Fri Jul 13 18:40:04 2012] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 18:40:04 2012] Initial guess for spatial extent in simple fitting = 9.27"
[Fri Jul 13 18:40:04 2012] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.048
[Fri Jul 13 18:40:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.27"
[Fri Jul 13 19:35:20 2012] fullrun_pn_xmm0556560101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jul 13 19:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556560101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 19:35:20 2012] fullrun_pn_xmm0556560101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jul 13 19:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556560101_pi300-10000_cl_pass0_src1.csv
[Fri Jul 13 19:35:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556560101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556560101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 19:35:20 2012] fullrun_pn_xmm0556560101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jul 13 19:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556560101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 13 19:35:20 2012] fullrun_pn_xmm0556560101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jul 13 19:35:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556560101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Jul 13 19:35:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556560101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556560101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 20:38:17 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.294826 pixels away
[Fri Jul 13 20:38:17 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 20:38:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 20:38:17 2012] Assessing source extent using major
[Fri Jul 13 20:38:17 2012] Source does appear to be extended
[Fri Jul 13 20:38:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 20:38:33 2012] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 20:38:33 2012] Initial guess for spatial extent in simple fitting = 9.27"
[Fri Jul 13 20:38:33 2012] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.048
[Fri Jul 13 20:38:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.27"
[Fri Jul 13 21:41:50 2012] fullrun_pn_xmm0556560101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jul 13 21:41:50 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556560101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 21:41:50 2012] fullrun_pn_xmm0556560101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jul 13 21:41:50 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556560101_pi300-10000_cl_pass1_src1.csv
[Fri Jul 13 21:41:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556560101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556560101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 21:41:50 2012] fullrun_pn_xmm0556560101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jul 13 21:41:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556560101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jul 13 21:41:50 2012] fullrun_pn_xmm0556560101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jul 13 21:41:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556560101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Jul 13 21:41:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556560101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556560101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 22:35:15 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.268078 pixels away
[Fri Jul 13 22:35:15 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 22:35:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 22:35:15 2012] Assessing source extent using major
[Fri Jul 13 22:35:15 2012] Source does appear to be extended
[Fri Jul 13 22:35:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 22:35:31 2012] Counts = 1244.917480, rescaling region sizes by 2.000000
[Fri Jul 13 22:35:31 2012] XMMSAS src. selection expression = ellipse(20866.347260, 21342.848022, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jul 13 22:35:31 2012] Writing source region out to fullrun_pn_xmm0556560101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jul 13 22:35:31 2012] Extracting stamp from image fullrun_pn_xmm0556560101_pi300-10000_cl_sm2.00.img.gz, (165, 171) - (315, 321)
[Fri Jul 13 22:35:31 2012] XMMSAS bgd. selection expression = annulus(20866.347260, 21342.848022, 4350.000000, 8700.000000, X, Y) && !ellipse(22012.690800, 29925.064200, 452.452813, 452.452813, 0.000000, X, Y) && !ellipse(12632.364639, 29885.505676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28754.402640, 28738.827000, 522.351215, 522.351215, 0.000000, X, Y) && !ellipse(25470.850403, 28451.067688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19481.693726, 27279.759033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25656.752600, 27060.074400, 438.290413, 438.290413, 0.000000, X, Y) && !ellipse(19233.329010, 23865.324982, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25582.087600, 23849.868800, 450.398413, 450.398413, 0.000000, X, Y) && !ellipse(19246.483353, 22717.850525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15806.996445, 21761.259399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26835.482361, 20498.346924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21412.227921, 20052.708221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25835.578000, 19108.839200, 386.816811, 386.816811, 0.000000, X, Y) && !ellipse(23658.453064, 18221.501328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20184.473600, 17856.131400, 490.816014, 490.816014, 0.000000, X, Y) && !ellipse(17315.519043, 17541.237686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25240.383240, 16479.208710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28354.615784, 15641.330582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18933.811172, 15528.661758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16923.903549, 15347.960464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25314.039062, 12494.672165, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 22:35:31 2012] Writing fullrun_pn_xmm0556560101_pi300-10000_pass1_cl_src1.gif
[Fri Jul 13 22:35:52 2012] Mean detx,y = (5450.79, -647.81) 
[Fri Jul 13 22:35:58 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 22:39:03 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 22:39:04 2012] Setting source spectrum file to fullrun_pn_xmm0556560101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 13 22:39:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556560101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 13 23:07:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 13 23:07:51 2012] rmf not generated due to insufficient counts
[Fri Jul 13 23:45:39 2012] Updating aperture counts using extracted products
[Fri Jul 13 23:45:39 2012] Error reading totcts from fullrun_pn_xmm0556560101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 13 23:45:40 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 23:45:40 2012] Using photon index=1.80, rate=0.0568, arf fullrun_pn_xmm0556560101_pi300-10000_pass1_cl_src1.arf
[Fri Jul 13 23:45:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 23:45:40 2012] Updating source flux to 1.8e-13
[Fri Jul 13 23:45:52 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Jul 13 23:46:20 2012] xmm0556560101/analysis//spectral/fullrun_pn_xmm0556560101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete