[Sat Jun 15 20:07:34 2013] Detection parameters:
  Position = (263.9, 314.8) = 5 36 15.58 -69 15 23.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 217.9 +/- 32.7
  Background counts = 449.0
  Rate = 0.003 +/- 0.0005

[Sat Jun 15 20:07:38 2013] Off-axis axis estimate = 2.77'
[Sat Jun 15 20:08:37 2013] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:37 2013] Initial guess for spatial extent in simple fitting = 7.81"
[Sat Jun 15 20:08:37 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.948
[Sat Jun 15 20:08:37 2013] Giving source the simple spatial ID 80 for pass 0, mean size = 7.81"
[Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src80.ximg exists
[Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src80.csv
[Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src80_1.ximg exists
[Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src80.csv
[Sat Jun 15 20:08:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:42 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Sat Jun 15 20:08:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src80.csv
[Sat Jun 15 20:08:42 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Sat Jun 15 20:08:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src80.csv
[Sat Jun 15 20:08:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:12 2013] Spatial fit model total counts = 4691.550000, observed total counts = 4100.000000
[Sat Jun 15 20:09:12 2013] Poor agreement between spatial fit and data for source 86
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:09:12 2013] Source 86 is offset by 6.278483 and -4.818197 pixels which is larger than
2 X fitted extent = 0.946612 x 0.946612, not incorporating fit results
[Sat Jun 15 20:09:12 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:12 2013] Assessing source extent using major
[Sat Jun 15 20:09:12 2013] Source does appear to be extended
[Sat Jun 15 20:09:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:12 2013] Source is confused with source 89
[Sat Jun 15 20:10:06 2013] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:06 2013] Initial guess for spatial extent in simple fitting = 7.81"
[Sat Jun 15 20:10:06 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.948
[Sat Jun 15 20:10:06 2013] Giving source the simple spatial ID 74 for pass 1, mean size = 7.81"
[Sat Jun 15 20:10:09 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src74.ximg exists
[Sat Jun 15 20:10:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src74.csv
[Sat Jun 15 20:10:09 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src74_1.ximg exists
[Sat Jun 15 20:10:09 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src74.csv
[Sat Jun 15 20:10:09 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:11 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Sat Jun 15 20:10:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src74.csv
[Sat Jun 15 20:10:11 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Sat Jun 15 20:10:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src74.csv
[Sat Jun 15 20:10:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:42 2013] Spatial fit model total counts = 4695.380000, observed total counts = 4100.000000
[Sat Jun 15 20:10:42 2013] Poor agreement between spatial fit and data for source 86
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:10:42 2013] Source 86 is offset by 5.581218 and 3.024861 pixels which is larger than
2 X fitted extent = 0.841228 x 6.729839, not incorporating fit results
[Sat Jun 15 20:10:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:43 2013] Assessing source extent using major
[Sat Jun 15 20:10:43 2013] Source does appear to be extended
[Sat Jun 15 20:10:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:11:40 2013] XMMSAS src. selection expression = ellipse(22906.570007, 27335.158875, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 20:11:40 2013] Not overwriting source region fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src86_src.reg
[Sat Jun 15 20:11:40 2013] Extracting stamp from image fullrun_pn_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (226, 277) - (301, 352)
[Sat Jun 15 20:11:40 2013] XMMSAS bgd. selection expression = annulus(22906.570007, 27335.158875, 1087.500000, 2175.000000, X, Y) && !ellipse(26171.891600, 24190.739800, 1344.336039, 1344.336039, 0.000000, X, Y) && !ellipse(22836.593360, 30101.492800, 1025.112029, 1025.112029, 0.000000, X, Y) && !ellipse(25005.641181, 23170.801760, 2802.384081, 408.354238, 132.696220, X, Y) && !ellipse(22196.372200, 29950.737200, 997.056029, 997.056029, 0.000000, X, Y) && !ellipse(21607.717600, 26907.653000, 1317.688038, 593.950417, 7.770780, X, Y) && !ellipse(22205.450000, 26926.693200, 1181.152034, 1181.152034, 0.000000, X, Y) && !ellipse(24106.356000, 26822.197600, 1176.992034, 1176.992034, 0.000000, X, Y) && !ellipse(24237.270691, 26431.190430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25032.637817, 26281.489258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23050.002655, 26403.490509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23784.009399, 26058.859741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25619.568000, 25934.484800, 1033.272030, 1033.272030, 0.000000, X, Y) && !ellipse(23100.782745, 25957.148224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20019.746033, 25113.780823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25032.266000, 24563.988000, 1127.936032, 1127.936032, 0.000000, X, Y)
[Sat Jun 15 20:11:40 2013] Writing fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src86.gif
[Sat Jun 15 20:16:38 2013] Mean detx,y = (-4313.51, 2495.35) 
[Sat Jun 15 20:16:42 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 15 20:16:59 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 15 20:16:59 2013] Setting source spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Sat Jun 15 20:16:59 2013] Setting bgd. spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Sun Jun 16 01:45:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 01:45:41 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:36:36 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:36:36 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src86_src_b10.pi.gz = 2744.00
[Sun Jun 16 03:36:37 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src86_bgd.pi.gz = 7319.00
[Sun Jun 16 03:36:37 2013] Got source and background scale factors 1105822.000000, 4090035.000000
[Sun Jun 16 03:36:37 2013] User source parameters:
  Position = (263.9, 314.8) = 5 36 15.58 -69 15 23.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 765.2 +/- 53.4
  Background aperture counts = 1978.8
  Rate = 0.008 +/- 0.0006

[Sun Jun 16 03:36:37 2013] Updating counts from extracted products
[Sun Jun 16 03:36:37 2013] Set source signif. to 765.16/44.48 = 17.20
[Sun Jun 16 03:37:15 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:15 2013] Using photon index=1.80, rate=0.00834, arf fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src86.arf
[Sun Jun 16 03:37:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:15 2013] Updating source flux to 4.6e-14
[Sun Jun 16 03:39:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:40:54 2013] xmm0556350101/analysis//spectral/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src86_pl.csv not found, spectral fit skipped or did not complete