[Sat Jun 15 20:07:34 2013] Detection parameters: Position = (328.3, 316.1) = 5 35 22.78 -69 15 28.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 206.0 +/- 36.1 Background counts = 464.6 Rate = 0.004 +/- 0.0006 [Sat Jun 15 20:07:38 2013] Off-axis axis estimate = 2.52' [Sat Jun 15 20:08:37 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:08:37 2013] Initial guess for spatial extent in simple fitting = 7.69" [Sat Jun 15 20:08:37 2013] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.681 [Sat Jun 15 20:08:37 2013] Giving source the simple spatial ID 79 for pass 0, mean size = 7.69" [Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src79.ximg exists [Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src79.csv [Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src79_1.ximg exists [Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src79.csv [Sat Jun 15 20:08:39 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src79_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:08:42 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src79.ximg exists [Sat Jun 15 20:08:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src79.csv [Sat Jun 15 20:08:42 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists [Sat Jun 15 20:08:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src79.csv [Sat Jun 15 20:08:42 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:09:12 2013] Spatial fit model total counts = 10157.900000, observed total counts = 7531.000000 [Sat Jun 15 20:09:12 2013] Poor agreement between spatial fit and data for source 85 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 15 20:09:12 2013] Warning, spatial fit 79 centroid is now closest to src. 80 [Sat Jun 15 20:09:12 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:09:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:09:12 2013] Assessing source extent using major [Sat Jun 15 20:09:12 2013] Source does appear to be extended [Sat Jun 15 20:09:12 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:09:12 2013] Source is confused with source 80 [Sat Jun 15 20:10:06 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:10:06 2013] Initial guess for spatial extent in simple fitting = 7.69" [Sat Jun 15 20:10:06 2013] source mask rpix=1.8, npix_max = 20, mask sum = 14, frac = 0.681 [Sat Jun 15 20:10:06 2013] Giving source the simple spatial ID 73 for pass 1, mean size = 7.69" [Sat Jun 15 20:10:09 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src73.ximg exists [Sat Jun 15 20:10:09 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src73_1.ximg exists [Sat Jun 15 20:10:09 2013] Fit fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src73 appears to have run properly [Sat Jun 15 20:10:11 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src73.ximg exists [Sat Jun 15 20:10:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src73.csv [Sat Jun 15 20:10:11 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src73_1.ximg exists [Sat Jun 15 20:10:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src73.csv [Sat Jun 15 20:10:11 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src73_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:42 2013] Source 85 is offset by 1.792811 and -1.414921 pixels which is larger than 2 X fitted extent = 1.575421 x 1.575421, not incorporating fit results [Sat Jun 15 20:10:43 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:10:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:10:43 2013] Assessing source extent using major [Sat Jun 15 20:10:43 2013] Source does appear to be extended [Sat Jun 15 20:10:43 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:11:40 2013] XMMSAS src. selection expression = ellipse(28516.676117, 27452.699677, 652.500000, 652.500000, 0.000000, X, Y) [Sat Jun 15 20:11:40 2013] Not overwriting source region fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src85_src.reg [Sat Jun 15 20:11:40 2013] Extracting stamp from image fullrun_pn_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (291, 279) - (366, 354) [Sat Jun 15 20:11:40 2013] XMMSAS bgd. selection expression = annulus(28516.676117, 27452.699677, 1087.500000, 2175.000000, X, Y) && !ellipse(27979.712140, 26408.730200, 1610.215246, 1610.215246, 0.000000, X, Y) && !ellipse(29876.951172, 27827.008362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26171.891600, 24190.739800, 1344.336039, 1344.336039, 0.000000, X, Y) && !ellipse(26703.755737, 29823.457642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25005.641181, 23170.801760, 2802.384081, 408.354238, 132.696220, X, Y) && !ellipse(26827.549133, 30397.966156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28233.729645, 29256.595612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27477.226837, 28338.916595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28100.970215, 27760.752106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29231.123260, 26743.745789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25619.568000, 25934.484800, 1033.272030, 1033.272030, 0.000000, X, Y) [Sat Jun 15 20:11:40 2013] Writing fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src85.gif [Sat Jun 15 20:15:28 2013] Mean detx,y = (-128.92, -1250.09) [Sat Jun 15 20:15:34 2013] Setting backscal keywords in source and bgd. spectrum [Sat Jun 15 20:15:58 2013] Binned source spectrum to 10 counts/bin [Sat Jun 15 20:15:58 2013] Setting source spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src85_src_b10.pi.gz [Sat Jun 15 20:15:58 2013] Setting bgd. spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src85_bgd.pi.gz [Sun Jun 16 01:39:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 16 01:39:49 2013] rmf not generated due to insufficient counts [Sun Jun 16 03:36:36 2013] Updating aperture counts using extracted products [Sun Jun 16 03:36:36 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src85_src_b10.pi.gz = 6769.00 [Sun Jun 16 03:36:36 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src85_bgd.pi.gz = 3948.00 [Sun Jun 16 03:36:36 2013] Got source and background scale factors 1070486.000000, 1900313.000000 [Sun Jun 16 03:36:36 2013] User source parameters: Position = (328.3, 316.1) = 5 35 22.78 -69 15 28.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 4545.0 +/- 83.3 Background aperture counts = 2224.0 Rate = 0.05 +/- 0.0009 [Sun Jun 16 03:36:36 2013] Updating counts from extracted products [Sun Jun 16 03:36:36 2013] Set source signif. to 4545.01/47.16 = 96.38 [Sun Jun 16 03:37:15 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 03:37:15 2013] Using photon index=1.80, rate=0.0495, arf fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src85.arf [Sun Jun 16 03:37:15 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 03:37:15 2013] Updating source flux to 2.2e-13 [Sun Jun 16 03:39:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 16 03:40:54 2013] xmm0556350101/analysis//spectral/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src85_pl.csv not found, spectral fit skipped or did not complete