[Sat Jun 15 20:07:33 2013] Detection parameters:
  Position = (259.0, 145.1) = 5 36 19.90 -69 27 42.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.2 +/- 28.2
  Background counts = 293.9
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 20:07:38 2013] Off-axis axis estimate = 11.48'
[Sat Jun 15 20:08:37 2013] Using EEF radius (= 12.17 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:37 2013] Initial guess for spatial extent in simple fitting = 12.17"
[Sat Jun 15 20:08:37 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.828
[Sat Jun 15 20:08:37 2013] Giving source the simple spatial ID 67 for pass 0, mean size = 12.17"
[Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src67.ximg exists
[Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src67.csv
[Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src67_1.ximg exists
[Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src67.csv
[Sat Jun 15 20:08:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:42 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Sat Jun 15 20:08:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Sat Jun 15 20:08:42 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Sat Jun 15 20:08:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Sat Jun 15 20:08:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:12 2013] Warning, spatial fit 67 centroid is now closest to src. 47
[Sat Jun 15 20:09:12 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:12 2013] Assessing source extent using major
[Sat Jun 15 20:09:12 2013] Source does appear to be extended
[Sat Jun 15 20:09:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:12 2013] Source is confused with source 47
[Sat Jun 15 20:10:06 2013] Using EEF radius (= 12.17 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:06 2013] Initial guess for spatial extent in simple fitting = 12.17"
[Sat Jun 15 20:10:06 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.828
[Sat Jun 15 20:10:06 2013] Giving source the simple spatial ID 64 for pass 1, mean size = 12.17"
[Sat Jun 15 20:10:08 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src64.ximg exists
[Sat Jun 15 20:10:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src64.csv
[Sat Jun 15 20:10:08 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src64_1.ximg exists
[Sat Jun 15 20:10:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src64.csv
[Sat Jun 15 20:10:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:11 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Sat Jun 15 20:10:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src64.csv
[Sat Jun 15 20:10:11 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Sat Jun 15 20:10:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src64.csv
[Sat Jun 15 20:10:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:42 2013] Warning: source 64 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 73 at 16.106165 pixels away
[Sat Jun 15 20:10:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:43 2013] Assessing source extent using major
[Sat Jun 15 20:10:43 2013] Source does appear to be extended
[Sat Jun 15 20:10:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:11:40 2013] XMMSAS src. selection expression = ellipse(22480.642242, 12577.126755, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 20:11:40 2013] Not overwriting source region fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73_src.reg
[Sat Jun 15 20:11:40 2013] Extracting stamp from image fullrun_pn_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (221, 108) - (296, 183)
[Sat Jun 15 20:11:40 2013] XMMSAS bgd. selection expression = annulus(22480.642242, 12577.126755, 1087.500000, 2175.000000, X, Y) && !ellipse(20141.709080, 17881.960400, 3376.560097, 463.128813, 312.689400, X, Y) && !ellipse(18737.050000, 16345.998000, 1782.688051, 1782.688051, 0.000000, X, Y) && !ellipse(22619.818878, 12136.798111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24199.595825, 13289.740601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25510.452820, 13856.544220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22879.913513, 15411.305481, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 20:11:40 2013] Writing fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73.gif
[Sat Jun 15 20:12:16 2013] ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73_src.evt and ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73_bgd.evt exist, delete to re-create
[Sat Jun 15 20:12:17 2013] Mean detx,y = (5519.93, 13611.00) 
[Sat Jun 15 20:12:17 2013] ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73_src.img and ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73_bgd.img exist, delete to re-create
[Sat Jun 15 20:12:17 2013] ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73_bgd.pi exist, delete to re-create
[Sat Jun 15 20:12:17 2013] Setting source spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Sat Jun 15 20:12:17 2013] Setting bgd. spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Sat Jun 15 20:12:17 2013] ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73_bgd.lc exist, delete to re-create
[Sun Jun 16 01:31:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 01:31:08 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:36:32 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:36:32 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73_src_b10.pi.gz = 1721.00
[Sun Jun 16 03:36:32 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73_bgd.pi.gz = 5705.00
[Sun Jun 16 03:36:32 2013] Got source and background scale factors 1136290.000000, 1896572.000000
[Sun Jun 16 03:36:32 2013] User source parameters:
  Position = (259.0, 145.1) = 5 36 19.90 -69 27 42.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -1697.0 +/- 42.5
  Background aperture counts = 3418.0
  Rate = -0.02 +/- 0.0005

[Sun Jun 16 03:36:32 2013] Updating counts from extracted products
[Sun Jun 16 03:36:32 2013] Set source signif. to -1697.03/58.46 = -29.03
[Sun Jun 16 03:37:15 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:15 2013] Using photon index=1.80, rate=-0.0185, arf fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73.arf
[Sun Jun 16 03:37:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:15 2013] Updated flux is not positive, keeping original flux
[Sun Jun 16 03:39:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:40:54 2013] xmm0556350101/analysis//spectral/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src73_pl.csv not found, spectral fit skipped or did not complete