[Sat Jun 15 20:07:33 2013] Detection parameters: Position = (228.2, 353.2) = 5 36 44.68 -69 12 37.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 136.6 +/- 29.4 Background counts = 367.7 Rate = 0.003 +/- 0.0006 [Sat Jun 15 20:07:38 2013] Off-axis axis estimate = 6.46' [Sat Jun 15 20:08:37 2013] Using EEF radius (= 9.66 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:08:37 2013] Initial guess for spatial extent in simple fitting = 9.66" [Sat Jun 15 20:08:37 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.013 [Sat Jun 15 20:08:37 2013] Giving source the simple spatial ID 62 for pass 0, mean size = 9.66" [Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src62.ximg exists [Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src62.csv [Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src62_1.ximg exists [Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src62.csv [Sat Jun 15 20:08:39 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src62_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:08:42 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src62.ximg exists [Sat Jun 15 20:08:42 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists [Sat Jun 15 20:08:42 2013] Fit fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly [Sat Jun 15 20:09:11 2013] Source 68 is offset by 6.075569 and 2.132820 pixels which is larger than 2 X fitted extent = 1.136138 x 1.136138, not incorporating fit results [Sat Jun 15 20:09:12 2013] Spatial fit model total counts = 3498.310000, observed total counts = 3495.000000 [Sat Jun 15 20:09:12 2013] Offset between fit and detection position for source 68 = 1.121884 pixels [Sat Jun 15 20:09:12 2013] 3592.905000 total counts/ 3398.700000 bgd. counts: snr = 3.331225 Spatial fit parameters: Offset between fit and detection position for source 68 = 1.121884 pixels Position = (227.8, 352.1) = 5 36 44.95 -69 12 41.9 Extent = 10.4 (7.2-16.5)", rotation angle = 0 Source counts = 194.2 +/- 59.9 Background counts = 3398.7 Rate = 0.002 +/- 0.0007 [Sat Jun 15 20:09:12 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:09:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:09:12 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:09:12 2013] Source does appear to be extended [Sat Jun 15 20:09:12 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:10:06 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 15 20:10:06 2013] Initial guess for spatial extent in simple fitting = 10.40" [Sat Jun 15 20:10:06 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.077 [Sat Jun 15 20:10:06 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 10.40" [Sat Jun 15 20:10:08 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src60.ximg exists [Sat Jun 15 20:10:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src60.csv [Sat Jun 15 20:10:08 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src60_1.ximg exists [Sat Jun 15 20:10:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src60.csv [Sat Jun 15 20:10:08 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src60_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:11 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src60.ximg exists [Sat Jun 15 20:10:11 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists [Sat Jun 15 20:10:11 2013] Fit fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly [Sat Jun 15 20:10:42 2013] Spatial fit model total counts = 3389.130000, observed total counts = 3381.000000 [Sat Jun 15 20:10:42 2013] Offset between fit and detection position for source 68 = 0.236122 pixels [Sat Jun 15 20:10:42 2013] 3474.871000 total counts/ 3249.440000 bgd. counts: snr = 3.954662 Spatial fit parameters: Offset between fit and detection position for source 68 = 0.236122 pixels Position = (227.9, 352.4) = 5 36 44.87 -69 12 40.9 Extent = 11.3 (7.8-18.2)", rotation angle = 0 Source counts = 225.4 +/- 58.9 Background counts = 3249.4 Rate = 0.002 +/- 0.0006 [Sat Jun 15 20:10:43 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:10:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:10:43 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:10:43 2013] Source does appear to be extended [Sat Jun 15 20:10:43 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:11:40 2013] XMMSAS src. selection expression = ellipse(19782.388980, 30606.997800, 677.088019, 677.088019, 0.000000, X, Y) [Sat Jun 15 20:11:40 2013] Not overwriting source region fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68_src.reg [Sat Jun 15 20:11:40 2013] Extracting stamp from image fullrun_pn_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (189, 313) - (267, 391) [Sat Jun 15 20:11:40 2013] XMMSAS bgd. selection expression = annulus(19782.388980, 30606.997800, 1128.480032, 2256.960065, X, Y) && !ellipse(18503.339325, 29637.140961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22293.636000, 34138.744000, 1634.088047, 1634.088047, 0.000000, X, Y) && !ellipse(22836.593360, 30101.492800, 1025.112029, 1025.112029, 0.000000, X, Y) && !ellipse(23100.154000, 33960.860000, 3321.280096, 3321.280096, 0.000000, X, Y) && !ellipse(20529.086800, 32586.249200, 894.216026, 894.216026, 0.000000, X, Y) && !ellipse(20993.562600, 31783.769040, 347.920810, 347.920810, 0.000000, X, Y) && !ellipse(21723.340271, 32751.567322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20421.718000, 32333.010000, 1598.904046, 1598.904046, 0.000000, X, Y) && !ellipse(21955.587631, 30557.607758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20830.706146, 30919.788269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22196.372200, 29950.737200, 997.056029, 997.056029, 0.000000, X, Y) [Sat Jun 15 20:11:40 2013] Writing fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68.gif [Sat Jun 15 20:12:15 2013] ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68_src.evt and ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68_bgd.evt exist, delete to re-create [Sat Jun 15 20:12:16 2013] Mean detx,y = (-8742.80, 2121.18) [Sat Jun 15 20:12:16 2013] ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68_src.img and ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68_bgd.img exist, delete to re-create [Sat Jun 15 20:12:16 2013] ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68_bgd.pi exist, delete to re-create [Sat Jun 15 20:12:16 2013] Setting source spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68_src_b10.pi.gz [Sat Jun 15 20:12:16 2013] Setting bgd. spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68_bgd.pi.gz [Sat Jun 15 20:12:16 2013] ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68_bgd.lc exist, delete to re-create [Sun Jun 16 03:36:30 2013] Updating aperture counts using extracted products [Sun Jun 16 03:36:30 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68_src_b10.pi.gz = 2569.00 [Sun Jun 16 03:36:30 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68_bgd.pi.gz = 5601.00 [Sun Jun 16 03:36:30 2013] Got source and background scale factors 1441600.000000, 4621673.000000 [Sun Jun 16 03:36:30 2013] User source parameters: Position = (227.9, 352.4) = 5 36 44.87 -69 12 40.9 Extent = 11.3 (7.8-18.2)", rotation angle = 0 Source aperture counts = 821.9 +/- 51.7 Background aperture counts = 1747.1 Rate = 0.009 +/- 0.0006 [Sun Jun 16 03:37:14 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 03:37:14 2013] Using photon index=1.80, rate=0.00246, arf fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68.arf [Sun Jun 16 03:37:14 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 03:37:15 2013] Updating source flux to 1.8e-14 [Sun Jun 16 03:39:35 2013] Flag b found in src. 68 procflags, skipping spectral fitting [Sun Jun 16 03:40:54 2013] xmm0556350101/analysis//spectral/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src68_pl.csv not found, spectral fit skipped or did not complete