[Sat Jun 15 20:07:33 2013] Detection parameters:
  Position = (276.8, 350.9) = 5 36 4.97 -69 12 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.5 +/- 31.1
  Background counts = 448.7
  Rate = 0.003 +/- 0.0005

[Sat Jun 15 20:07:38 2013] Off-axis axis estimate = 4.12'
[Sat Jun 15 20:08:37 2013] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:37 2013] Initial guess for spatial extent in simple fitting = 8.49"
[Sat Jun 15 20:08:37 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.040
[Sat Jun 15 20:08:37 2013] Giving source the simple spatial ID 60 for pass 0, mean size = 8.49"
[Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src60.ximg exists
[Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src60.csv
[Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src60_1.ximg exists
[Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src60.csv
[Sat Jun 15 20:08:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:42 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Sat Jun 15 20:08:42 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src60.csv
[Sat Jun 15 20:08:42 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Sat Jun 15 20:08:42 2013] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src60.csv
[Sat Jun 15 20:08:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:12 2013] Spatial fit model total counts = -541.402000, observed total counts = 3983.000000
[Sat Jun 15 20:09:12 2013] Poor agreement between spatial fit and data for source 66
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:09:12 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:12 2013] Assessing source extent using major
[Sat Jun 15 20:09:12 2013] Source does appear to be extended
[Sat Jun 15 20:09:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:06 2013] Using EEF radius (= 8.49 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:06 2013] Initial guess for spatial extent in simple fitting = 8.49"
[Sat Jun 15 20:10:06 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.040
[Sat Jun 15 20:10:06 2013] Giving source the simple spatial ID 58 for pass 1, mean size = 8.49"
[Sat Jun 15 20:10:08 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src58.ximg exists
[Sat Jun 15 20:10:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src58.csv
[Sat Jun 15 20:10:08 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src58_1.ximg exists
[Sat Jun 15 20:10:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src58.csv
[Sat Jun 15 20:10:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:11 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Sat Jun 15 20:10:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src58.csv
[Sat Jun 15 20:10:11 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Sat Jun 15 20:10:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src58.csv
[Sat Jun 15 20:10:11 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:42 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 66 at 15.845175 pixels away
[Sat Jun 15 20:10:42 2013] Source 66 is offset by 8.568060 and 3.561390 pixels which is larger than
2 X fitted extent = 7.804414 x 4.625875, not incorporating fit results
[Sat Jun 15 20:10:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:43 2013] Assessing source extent using major
[Sat Jun 15 20:10:43 2013] Source does appear to be extended
[Sat Jun 15 20:10:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:11:40 2013] XMMSAS src. selection expression = ellipse(24031.112976, 30482.956299, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 20:11:40 2013] Not overwriting source region fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66_src.reg
[Sat Jun 15 20:11:40 2013] Extracting stamp from image fullrun_pn_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (239, 313) - (314, 388)
[Sat Jun 15 20:11:40 2013] XMMSAS bgd. selection expression = annulus(24031.112976, 30482.956299, 1087.500000, 2175.000000, X, Y) && !ellipse(22293.636000, 34138.744000, 1634.088047, 1634.088047, 0.000000, X, Y) && !ellipse(23668.921844, 31743.041168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26703.755737, 29823.457642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22836.593360, 30101.492800, 1025.112029, 1025.112029, 0.000000, X, Y) && !ellipse(23100.154000, 33960.860000, 3321.280096, 3321.280096, 0.000000, X, Y) && !ellipse(26503.582458, 33504.446014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21723.340271, 32751.567322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27140.568000, 32961.488000, 1483.768043, 1483.768043, 0.000000, X, Y) && !ellipse(26421.066000, 31561.836000, 1360.640039, 1360.640039, 0.000000, X, Y) && !ellipse(26450.191200, 31588.529000, 370.739211, 370.739211, 0.000000, X, Y) && !ellipse(20421.718000, 32333.010000, 1598.904046, 1598.904046, 0.000000, X, Y) && !ellipse(26650.737457, 30841.995911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21955.587631, 30557.607758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26827.549133, 30397.966156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22196.372200, 29950.737200, 997.056029, 997.056029, 0.000000, X, Y)
[Sat Jun 15 20:11:40 2013] Writing fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66.gif
[Sat Jun 15 20:12:14 2013] ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66_src.evt and ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66_bgd.evt exist, delete to re-create
[Sat Jun 15 20:12:15 2013] Mean detx,y = (-5571.48, -515.60) 
[Sat Jun 15 20:12:15 2013] ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66_src.img and ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66_bgd.img exist, delete to re-create
[Sat Jun 15 20:12:15 2013] ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66_bgd.pi exist, delete to re-create
[Sat Jun 15 20:12:15 2013] Setting source spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Sat Jun 15 20:12:15 2013] Setting bgd. spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Sat Jun 15 20:12:15 2013] ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66_bgd.lc exist, delete to re-create
[Sun Jun 16 01:22:09 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 01:22:09 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:36:29 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:36:29 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66_src_b10.pi.gz = 2578.00
[Sun Jun 16 03:36:29 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66_bgd.pi.gz = 5443.00
[Sun Jun 16 03:36:29 2013] Got source and background scale factors 1147480.000000, 3118317.000000
[Sun Jun 16 03:36:29 2013] User source parameters:
  Position = (276.8, 350.9) = 5 36 4.97 -69 12 45.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 575.1 +/- 51.8
  Background aperture counts = 2002.9
  Rate = 0.006 +/- 0.0006

[Sun Jun 16 03:36:29 2013] Updating counts from extracted products
[Sun Jun 16 03:36:29 2013] Set source signif. to 575.08/44.75 = 12.85
[Sun Jun 16 03:37:14 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:14 2013] Using photon index=1.80, rate=0.00627, arf fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66.arf
[Sun Jun 16 03:37:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:14 2013] Updating source flux to 3.6e-14
[Sun Jun 16 03:39:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:40:54 2013] xmm0556350101/analysis//spectral/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src66_pl.csv not found, spectral fit skipped or did not complete