[Sat Jun 15 20:07:32 2013] Detection parameters: Position = (317.2, 369.1) = 5 35 31.92 -69 11 26.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 386.3 +/- 36.0 Background counts = 329.6 Rate = 0.006 +/- 0.0006 [Sat Jun 15 20:07:38 2013] Off-axis axis estimate = 5.30' [Sat Jun 15 20:08:37 2013] Using EEF radius (= 9.08 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:08:37 2013] Initial guess for spatial extent in simple fitting = 9.08" [Sat Jun 15 20:08:37 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.934 [Sat Jun 15 20:08:37 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 9.08" [Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src53.ximg exists [Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src53.csv [Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src53_1.ximg exists [Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src53.csv [Sat Jun 15 20:08:39 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src53_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:08:41 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists [Sat Jun 15 20:08:41 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists [Sat Jun 15 20:08:41 2013] Fit fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly [Sat Jun 15 20:09:12 2013] Spatial fit model total counts = 4324.940000, observed total counts = 4321.000000 [Sat Jun 15 20:09:12 2013] Offset between fit and detection position for source 59 = 3.422646 pixels [Sat Jun 15 20:09:12 2013] 4319.770000 total counts/ 3278.730000 bgd. counts: snr = 18.180867 Spatial fit parameters: Offset between fit and detection position for source 59 = 3.422646 pixels Position = (319.3, 366.4) = 5 35 30.25 -69 11 40.5 Extent = 17.4 (16.0-18.2)", rotation angle = 0 Source counts = 1041.0 +/- 65.7 Background counts = 3278.7 Rate = 0.01 +/- 0.0007 [Sat Jun 15 20:09:12 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:09:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:09:12 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:09:12 2013] Source does appear to be extended [Sat Jun 15 20:09:12 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:10:06 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 15 20:10:06 2013] Initial guess for spatial extent in simple fitting = 17.41" [Sat Jun 15 20:10:06 2013] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 0.999 [Sat Jun 15 20:10:06 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 17.41" [Sat Jun 15 20:10:08 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src51.ximg exists [Sat Jun 15 20:10:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src51.csv [Sat Jun 15 20:10:08 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src51_1.ximg exists [Sat Jun 15 20:10:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src51.csv [Sat Jun 15 20:10:08 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src51_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:10 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists [Sat Jun 15 20:10:10 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists [Sat Jun 15 20:10:10 2013] Fit fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly [Sat Jun 15 20:10:42 2013] Spatial fit model total counts = 8007.060000, observed total counts = 7592.000000 [Sat Jun 15 20:10:42 2013] Offset between fit and detection position for source 59 = 1.657082 pixels [Sat Jun 15 20:10:42 2013] 7865.738000 total counts/ 7076.750000 bgd. counts: snr = 9.378934 Spatial fit parameters: Offset between fit and detection position for source 59 = 1.657082 pixels Position = (318.6, 367.9) = 5 35 30.78 -69 11 33.9 Extent = 15.1 (12.7-18.6)", rotation angle = 0 Source counts = 789.0 +/- 88.7 Background counts = 7076.8 Rate = 0.009 +/- 0.001 [Sat Jun 15 20:10:43 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:10:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:10:43 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:10:43 2013] Source does appear to be extended [Sat Jun 15 20:10:43 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:11:39 2013] XMMSAS src. selection expression = ellipse(27672.548600, 31958.653000, 903.282026, 903.282026, 0.000000, X, Y) [Sat Jun 15 20:11:39 2013] Not overwriting source region fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59_src.reg [Sat Jun 15 20:11:39 2013] Extracting stamp from image fullrun_pn_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (267, 316) - (371, 420) [Sat Jun 15 20:11:39 2013] XMMSAS bgd. selection expression = annulus(27672.548600, 31958.653000, 1505.470043, 3010.940087, X, Y) && !ellipse(26703.755737, 29823.457642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25750.690000, 34377.199000, 1586.800046, 1586.800046, 0.000000, X, Y) && !ellipse(23100.154000, 33960.860000, 3321.280096, 3321.280096, 0.000000, X, Y) && !ellipse(26503.582458, 33504.446014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23934.098000, 35565.294000, 1660.640048, 1660.640048, 0.000000, X, Y) && !ellipse(24354.731842, 34849.428101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27140.568000, 32961.488000, 1483.768043, 1483.768043, 0.000000, X, Y) && !ellipse(26421.066000, 31561.836000, 1360.640039, 1360.640039, 0.000000, X, Y) && !ellipse(30344.234600, 31327.429000, 586.760817, 586.760817, 0.000000, X, Y) && !ellipse(26450.191200, 31588.529000, 370.739211, 370.739211, 0.000000, X, Y) && !ellipse(26650.737457, 30841.995911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24031.112976, 30482.956299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26827.549133, 30397.966156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28233.729645, 29256.595612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27477.226837, 28338.916595, 870.000000, 870.000000, 0.000000, X, Y) [Sat Jun 15 20:11:39 2013] Writing fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59.gif [Sat Jun 15 20:12:12 2013] ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59_src.evt and ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59_bgd.evt exist, delete to re-create [Sat Jun 15 20:12:12 2013] Mean detx,y = (-3948.90, -4142.96) [Sat Jun 15 20:12:12 2013] ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59_src.img and ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59_bgd.img exist, delete to re-create [Sat Jun 15 20:12:12 2013] ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59_bgd.pi exist, delete to re-create [Sat Jun 15 20:12:12 2013] Setting source spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59_src_b10.pi.gz [Sat Jun 15 20:12:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59_bgd.pi.gz [Sat Jun 15 20:12:12 2013] ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59_bgd.lc exist, delete to re-create [Sun Jun 16 03:36:26 2013] Updating aperture counts using extracted products [Sun Jun 16 03:36:26 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59_src_b10.pi.gz = 4960.00 [Sun Jun 16 03:36:26 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59_bgd.pi.gz = 6948.00 [Sun Jun 16 03:36:26 2013] Got source and background scale factors 2443694.000000, 6704401.000000 [Sun Jun 16 03:36:26 2013] User source parameters: Position = (318.6, 367.9) = 5 35 30.78 -69 11 33.9 Extent = 15.1 (12.7-18.6)", rotation angle = 0 Source aperture counts = 2427.5 +/- 71.4 Background aperture counts = 2532.5 Rate = 0.03 +/- 0.0008 [Sun Jun 16 03:37:14 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 03:37:14 2013] Using photon index=1.80, rate=0.0086, arf fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59.arf [Sun Jun 16 03:37:14 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 03:37:14 2013] Updating source flux to 4.6e-14 [Sun Jun 16 03:40:54 2013] xmm0556350101/analysis//spectral/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src59_pl.csv not found, spectral fit skipped or did not complete