[Sat Jun 15 20:07:32 2013] Detection parameters:
  Position = (315.7, 375.0) = 5 35 33.22 -69 11 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 484.8 +/- 38.1
  Background counts = 315.9
  Rate = 0.008 +/- 0.0006

[Sat Jun 15 20:07:38 2013] Off-axis axis estimate = 5.69'
[Sat Jun 15 20:08:37 2013] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:37 2013] Initial guess for spatial extent in simple fitting = 9.27"
[Sat Jun 15 20:08:37 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.083
[Sat Jun 15 20:08:37 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 9.27"
[Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src50.ximg exists
[Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src50.csv
[Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src50_1.ximg exists
[Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src50.csv
[Sat Jun 15 20:08:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:41 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Sat Jun 15 20:08:41 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Sat Jun 15 20:08:41 2013] Fit fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Sat Jun 15 20:09:12 2013] Spatial fit model total counts = 6021.070000, observed total counts = 4696.000000
[Sat Jun 15 20:09:12 2013] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:09:12 2013] Spatial fit model total counts = 4526.570000, observed total counts = 4412.000000
[Sat Jun 15 20:09:12 2013] Offset between fit and detection position for source 56 = 5.414654 pixels
[Sat Jun 15 20:09:12 2013] 4352.070000 total counts/ 2631.010000 bgd. counts: snr = 33.553263
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 5.414654 pixels
  Position = (312.5, 379.4) = 5 35 35.78 -69 10 43.8
  Extent = 18.5 (18.5-37.1)", rotation angle = 0
  Source counts = 1721.1 +/- 66.0
  Background counts = 2631.0
  Rate = 0.02 +/- 0.0007
[Sat Jun 15 20:09:12 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:12 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:09:12 2013] Source does appear to be extended
[Sat Jun 15 20:09:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:12 2013] Source is confused with source 22
[Sat Jun 15 20:10:06 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:06 2013] Initial guess for spatial extent in simple fitting = 18.55"
[Sat Jun 15 20:10:06 2013] source mask rpix=4.3, npix_max = 90, mask sum = 71, frac = 0.782
[Sat Jun 15 20:10:06 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 18.55"
[Sat Jun 15 20:10:08 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src48.ximg exists
[Sat Jun 15 20:10:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src48.csv
[Sat Jun 15 20:10:08 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src48_1.ximg exists
[Sat Jun 15 20:10:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src48.csv
[Sat Jun 15 20:10:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:10 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sat Jun 15 20:10:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sat Jun 15 20:10:10 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sat Jun 15 20:10:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sat Jun 15 20:10:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:42 2013] Warning, spatial fit 48 centroid is now closest to src. 61
[Sat Jun 15 20:10:42 2013] Source 56 is offset by 2.628913 and 1.534046 pixels which is larger than
2 X fitted extent = 2.257098 x 4.148883, not incorporating fit results
[Sat Jun 15 20:10:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:43 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:10:43 2013] Source does appear to be extended
[Sat Jun 15 20:10:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:11:39 2013] Counts = 1721.060000, rescaling region sizes by 2.000000
[Sat Jun 15 20:11:39 2013] XMMSAS src. selection expression = ellipse(27140.568000, 32961.488000, 2225.652064, 2225.652064, 0.000000, X, Y)
[Sat Jun 15 20:11:39 2013] Not overwriting source region fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56_src.reg
[Sat Jun 15 20:11:39 2013] Extracting stamp from image fullrun_pn_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (185, 252) - (440, 507)
[Sat Jun 15 20:11:39 2013] XMMSAS bgd. selection expression = annulus(27140.568000, 32961.488000, 7418.840213, 14837.680427, X, Y) && !ellipse(27979.712140, 26408.730200, 1610.215246, 1610.215246, 0.000000, X, Y) && !ellipse(18503.339325, 29637.140961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29876.951172, 27827.008362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14702.159103, 23205.274078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26171.891600, 24190.739800, 1344.336039, 1344.336039, 0.000000, X, Y) && !ellipse(13168.399800, 33454.294800, 2222.865664, 2222.865664, 0.000000, X, Y) && !ellipse(22293.636000, 34138.744000, 1634.088047, 1634.088047, 0.000000, X, Y) && !ellipse(23668.921844, 31743.041168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26703.755737, 29823.457642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22836.593360, 30101.492800, 1025.112029, 1025.112029, 0.000000, X, Y) && !ellipse(21858.008000, 19764.430000, 3280.848094, 522.913615, 133.181000, X, Y) && !ellipse(21003.607216, 18811.553200, 3280.848094, 461.379213, 133.215000, X, Y) && !ellipse(20589.604000, 18389.198000, 1688.280049, 1688.280049, 0.000000, X, Y) && !ellipse(20141.709080, 17881.960400, 3376.560097, 463.128813, 312.689400, X, Y) && !ellipse(19173.648000, 16855.452000, 1823.456052, 1823.456052, 0.000000, X, Y) && !ellipse(18737.050000, 16345.998000, 1782.688051, 1782.688051, 0.000000, X, Y) && !ellipse(25750.690000, 34377.199000, 1586.800046, 1586.800046, 0.000000, X, Y) && !ellipse(23100.154000, 33960.860000, 3321.280096, 3321.280096, 0.000000, X, Y) && !ellipse(21867.147278, 33807.979584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26503.582458, 33504.446014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20529.086800, 32586.249200, 894.216026, 894.216026, 0.000000, X, Y) && !ellipse(20993.562600, 31783.769040, 347.920810, 347.920810, 0.000000, X, Y) && !ellipse(10426.256000, 30531.080000, 2033.400059, 698.625620, 320.071000, X, Y) && !ellipse(16547.948746, 29872.997833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25005.641181, 23170.801760, 2802.384081, 408.354238, 132.696220, X, Y) && !ellipse(23066.150000, 20988.686000, 3045.536088, 3045.536088, 0.000000, X, Y) && !ellipse(23148.636360, 21130.965588, 2802.384081, 440.115975, 133.515371, X, Y) && !ellipse(22645.694800, 20584.079660, 2802.384081, 408.412812, 132.584700, X, Y) && !ellipse(22253.056000, 20149.930000, 1522.768044, 1522.768044, 0.000000, X, Y) && !ellipse(14963.508240, 18714.041122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39713.978088, 34256.650330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12260.371140, 34917.890686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13532.950000, 35288.478000, 1246.800036, 1246.800036, 0.000000, X, Y) && !ellipse(27477.715363, 21652.226639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17543.242233, 41458.353577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17732.896286, 42044.918579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16745.108566, 40871.820435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17059.270218, 40129.875153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16722.445236, 39583.140900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15915.418000, 36509.438000, 1990.680057, 1990.680057, 0.000000, X, Y) && !ellipse(13469.637421, 35834.292633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38532.370575, 36044.796631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15485.637009, 35889.896912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14745.688000, 35160.892000, 1990.680057, 1990.680057, 0.000000, X, Y) && !ellipse(23934.098000, 35565.294000, 1660.640048, 1660.640048, 0.000000, X, Y) && !ellipse(24354.731842, 34849.428101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21723.340271, 32751.567322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26421.066000, 31561.836000, 1360.640039, 1360.640039, 0.000000, X, Y) && !ellipse(32889.596985, 31733.472443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27672.548600, 31958.653000, 1204.376035, 1204.376035, 0.000000, X, Y) && !ellipse(30344.234600, 31327.429000, 586.760817, 586.760817, 0.000000, X, Y) && !ellipse(26450.191200, 31588.529000, 370.739211, 370.739211, 0.000000, X, Y) && !ellipse(20421.718000, 32333.010000, 1598.904046, 1598.904046, 0.000000, X, Y) && !ellipse(11799.057144, 31197.894623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26650.737457, 30841.995911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24031.112976, 30482.956299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21955.587631, 30557.607758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19782.388980, 30606.997800, 902.784026, 902.784026, 0.000000, X, Y) && !ellipse(20830.706146, 30919.788269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26827.549133, 30397.966156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22196.372200, 29950.737200, 997.056029, 997.056029, 0.000000, X, Y) && !ellipse(28233.729645, 29256.595612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35695.158478, 28558.445038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27477.226837, 28338.916595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28100.970215, 27760.752106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37356.188000, 27756.715600, 1769.832051, 1769.832051, 0.000000, X, Y) && !ellipse(15876.144028, 27560.618652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28516.676117, 27452.699677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22906.570007, 27335.158875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36447.904419, 27123.226471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21607.717600, 26907.653000, 1317.688038, 593.950417, 7.770780, X, Y) && !ellipse(22205.450000, 26926.693200, 1181.152034, 1181.152034, 0.000000, X, Y) && !ellipse(29231.123260, 26743.745789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24106.356000, 26822.197600, 1176.992034, 1176.992034, 0.000000, X, Y) && !ellipse(24237.270691, 26431.190430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12158.168000, 26569.419800, 1968.632057, 1968.632057, 0.000000, X, Y) && !ellipse(25032.637817, 26281.489258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23050.002655, 26403.490509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23784.009399, 26058.859741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25619.568000, 25934.484800, 1033.272030, 1033.272030, 0.000000, X, Y) && !ellipse(23100.782745, 25957.148224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19290.018400, 26070.745200, 358.901610, 358.901610, 0.000000, X, Y) && !ellipse(19266.599182, 25284.249634, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20019.746033, 25113.780823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25032.266000, 24563.988000, 1127.936032, 1127.936032, 0.000000, X, Y) && !ellipse(18959.181305, 24929.787292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34510.406260, 24382.407920, 358.677610, 358.677610, 0.000000, X, Y) && !ellipse(16981.274750, 24304.657990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28663.097600, 23871.110000, 1228.784035, 1228.784035, 0.000000, X, Y) && !ellipse(19002.032150, 24137.462830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20579.507187, 23786.258209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17782.107254, 23875.753937, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27480.073029, 23418.446381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19193.316391, 23518.992340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24100.847321, 23312.542572, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18330.548691, 23277.273163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19261.413910, 23124.293030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30020.582947, 23248.760803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26771.833344, 23095.966522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19814.496338, 22927.608459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25412.237976, 22841.381073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27073.479187, 22658.608856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18033.543839, 22845.809662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19690.677719, 22468.636200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17354.413895, 23094.678833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26632.019501, 21804.511154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26355.734497, 22312.069122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24500.598000, 22680.818000, 1227.824035, 1227.824035, 0.000000, X, Y) && !ellipse(25637.150818, 22409.444977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22115.939453, 22163.883972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11916.345718, 22063.818573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39747.330566, 22239.682404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36560.140472, 22103.025391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16962.337753, 22160.558548, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27396.505981, 22321.967072, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25212.085938, 21869.324402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17625.574692, 21996.631729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24694.591522, 21814.482117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26162.910339, 21612.476868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28234.523499, 21304.263809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16604.142441, 21172.958008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15202.402466, 21175.540024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30898.765747, 20919.324387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20897.854492, 20501.412155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30653.504761, 20424.620743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34556.246490, 20015.763489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15523.686234, 19105.831848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16158.827652, 19017.477783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15395.758957, 18303.819183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32333.132050, 17936.333923, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29674.133484, 45709.273193, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 20:11:39 2013] Writing fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56.gif
[Sat Jun 15 20:12:11 2013] ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56_src.evt and ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56_bgd.evt exist, delete to re-create
[Sat Jun 15 20:12:11 2013] Mean detx,y = (-5104.15, -4300.71) 
[Sat Jun 15 20:12:11 2013] ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56_src.img and ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56_bgd.img exist, delete to re-create
[Sat Jun 15 20:12:11 2013] ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56_bgd.pi exist, delete to re-create
[Sat Jun 15 20:12:11 2013] Setting source spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Sat Jun 15 20:12:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Sat Jun 15 20:12:11 2013] ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56_bgd.lc exist, delete to re-create
[Sun Jun 16 03:36:24 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:36:24 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 26431.00
[Sun Jun 16 03:36:24 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56_bgd.pi.gz = 327774.00
[Sun Jun 16 03:36:24 2013] Got source and background scale factors 14011710.000000, 275219760.000000
[Sun Jun 16 03:36:24 2013] User source parameters:
  Position = (312.5, 379.4) = 5 35 35.78 -69 10 43.8
  Extent = 18.5 (18.5-37.1)", rotation angle = 0
  Source aperture counts = 9743.7 +/- 163.6
  Background aperture counts = 16687.3
  Rate = 0.1 +/- 0.002

[Sun Jun 16 03:37:14 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:14 2013] Using photon index=1.80, rate=0.0188, arf fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56.arf
[Sun Jun 16 03:37:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:14 2013] Updating source flux to 1e-13
[Sun Jun 16 03:39:35 2013] Flag b found in src. 56 procflags, skipping spectral fitting
[Sun Jun 16 03:39:35 2013] Flag p found in src. 56 procflags, skipping spectral fitting
[Sun Jun 16 03:39:35 2013] Flag c found in src. 56 procflags, skipping spectral fitting
[Sun Jun 16 03:40:54 2013] xmm0556350101/analysis//spectral/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete