[Sat Jun 15 20:07:32 2013] Detection parameters:
  Position = (250.3, 377.0) = 5 36 26.58 -69 10 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.8 +/- 30.4
  Background counts = 382.4
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 20:07:38 2013] Off-axis axis estimate = 6.68'
[Sat Jun 15 20:08:37 2013] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:37 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Sat Jun 15 20:08:37 2013] source mask rpix=2.2, npix_max = 30, mask sum = 29, frac = 0.962
[Sat Jun 15 20:08:37 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 9.77"
[Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src49.ximg exists
[Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src49.csv
[Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src49_1.ximg exists
[Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src49.csv
[Sat Jun 15 20:08:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:41 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Sat Jun 15 20:08:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src49.csv
[Sat Jun 15 20:08:41 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Sat Jun 15 20:08:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src49.csv
[Sat Jun 15 20:08:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:12 2013] Spatial fit model total counts = 4676.210000, observed total counts = 3947.000000
[Sat Jun 15 20:09:12 2013] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:09:12 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:12 2013] Assessing source extent using major
[Sat Jun 15 20:09:12 2013] Source does appear to be extended
[Sat Jun 15 20:09:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:06 2013] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:06 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Sat Jun 15 20:10:06 2013] source mask rpix=2.2, npix_max = 30, mask sum = 29, frac = 0.962
[Sat Jun 15 20:10:06 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 9.77"
[Sat Jun 15 20:10:08 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src47.ximg exists
[Sat Jun 15 20:10:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src47.csv
[Sat Jun 15 20:10:08 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src47_1.ximg exists
[Sat Jun 15 20:10:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src47.csv
[Sat Jun 15 20:10:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:10 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Sat Jun 15 20:10:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sat Jun 15 20:10:10 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Sat Jun 15 20:10:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src47.csv
[Sat Jun 15 20:10:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:42 2013] Source 55 is offset by 8.639566 and -4.963479 pixels which is larger than
2 X fitted extent = 3.969504 x 3.969504, not incorporating fit results
[Sat Jun 15 20:10:42 2013] Spatial fit model total counts = 4688.270000, observed total counts = 3947.000000
[Sat Jun 15 20:10:42 2013] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:10:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:43 2013] Assessing source extent using major
[Sat Jun 15 20:10:43 2013] Source does appear to be extended
[Sat Jun 15 20:10:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:43 2013] Source is confused with source 20
[Sat Jun 15 20:11:39 2013] XMMSAS src. selection expression = ellipse(21723.340271, 32751.567322, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 20:11:39 2013] Not overwriting source region fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55_src.reg
[Sat Jun 15 20:11:39 2013] Extracting stamp from image fullrun_pn_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (213, 340) - (288, 415)
[Sat Jun 15 20:11:39 2013] XMMSAS bgd. selection expression = annulus(21723.340271, 32751.567322, 1087.500000, 2175.000000, X, Y) && !ellipse(22293.636000, 34138.744000, 1634.088047, 1634.088047, 0.000000, X, Y) && !ellipse(23668.921844, 31743.041168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22836.593360, 30101.492800, 1025.112029, 1025.112029, 0.000000, X, Y) && !ellipse(23100.154000, 33960.860000, 3321.280096, 3321.280096, 0.000000, X, Y) && !ellipse(21867.147278, 33807.979584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20529.086800, 32586.249200, 894.216026, 894.216026, 0.000000, X, Y) && !ellipse(20993.562600, 31783.769040, 347.920810, 347.920810, 0.000000, X, Y) && !ellipse(23934.098000, 35565.294000, 1660.640048, 1660.640048, 0.000000, X, Y) && !ellipse(24354.731842, 34849.428101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20421.718000, 32333.010000, 1598.904046, 1598.904046, 0.000000, X, Y) && !ellipse(24031.112976, 30482.956299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21955.587631, 30557.607758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19782.388980, 30606.997800, 902.784026, 902.784026, 0.000000, X, Y) && !ellipse(20830.706146, 30919.788269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22196.372200, 29950.737200, 997.056029, 997.056029, 0.000000, X, Y)
[Sat Jun 15 20:11:39 2013] Writing fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55.gif
[Sat Jun 15 20:12:10 2013] ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55_src.evt and ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55_bgd.evt exist, delete to re-create
[Sat Jun 15 20:12:11 2013] Mean detx,y = (-8799.18, -623.29) 
[Sat Jun 15 20:12:11 2013] ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55_src.img and ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55_bgd.img exist, delete to re-create
[Sat Jun 15 20:12:11 2013] ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55_bgd.pi exist, delete to re-create
[Sat Jun 15 20:12:11 2013] Setting source spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Sat Jun 15 20:12:11 2013] Setting bgd. spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sat Jun 15 20:12:11 2013] ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55_bgd.lc exist, delete to re-create
[Sun Jun 16 00:57:15 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 00:57:15 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:36:24 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:36:24 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 2516.00
[Sun Jun 16 03:36:24 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55_bgd.pi.gz = 0.00
[Sun Jun 16 03:36:24 2013] Got source and background scale factors 1079902.000000, 0.000000
[Sun Jun 16 03:36:24 2013] Background scale factor is not positive, halting re-assessment of this source
[Sun Jun 16 03:37:13 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:13 2013] Using photon index=1.80, rate=0.00188, arf fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55.arf
[Sun Jun 16 03:37:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:14 2013] Updating source flux to 1.5e-14
[Sun Jun 16 03:39:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:40:54 2013] xmm0556350101/analysis//spectral/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete