[Sat Jun 15 20:07:32 2013] Detection parameters:
  Position = (188.2, 459.8) = 5 37 16.77 -69 4 52.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 208.1 +/- 30.3
  Background counts = 237.9
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 20:07:38 2013] Off-axis axis estimate = 14.17'
[Sat Jun 15 20:08:37 2013] Using EEF radius (= 13.51 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:37 2013] Initial guess for spatial extent in simple fitting = 13.51"
[Sat Jun 15 20:08:37 2013] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.942
[Sat Jun 15 20:08:37 2013] Giving source the simple spatial ID 39 for pass 0, mean size = 13.51"
[Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src39.ximg exists
[Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src39.csv
[Sat Jun 15 20:08:39 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src39_1.ximg exists
[Sat Jun 15 20:08:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src39.csv
[Sat Jun 15 20:08:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:41 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Sat Jun 15 20:08:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sat Jun 15 20:08:41 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Sat Jun 15 20:08:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src39.csv
[Sat Jun 15 20:08:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:12 2013] Warning, spatial fit 39 centroid is now closest to src. 41
[Sat Jun 15 20:09:12 2013] Spatial fit model total counts = 2828.170000, observed total counts = 2825.000000
[Sat Jun 15 20:09:12 2013] Offset between fit and detection position for source 45 = 0.302744 pixels
[Sat Jun 15 20:09:12 2013] Warning, changing simple spatial fit ID from 39 to 40
[Sat Jun 15 20:09:12 2013] 2707.564800 total counts/ 2658.810000 bgd. counts: snr = 0.945527
Spatial fit parameters:
  Offset between fit and detection position for source 45 = 0.302744 pixels
  Position = (188.4, 459.6) = 5 37 16.65 -69 4 53.7
  Extent = 3.3 (3.3-5.0)", rotation angle = 0
  Source counts = 48.8 +/- 52.0
  Background counts = 2658.8
  Rate = 0.0005 +/- 0.0006
  Deleting source due to low Poisson probability