[Sat Jun 15 20:07:32 2013] Detection parameters:
  Position = (193.0, 470.3) = 5 37 12.83 -69 4 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.1 +/- 27.4
  Background counts = 222.9
  Rate = 0.001 +/- 0.0003

[Sat Jun 15 20:07:38 2013] Off-axis axis estimate = 14.62'
[Sat Jun 15 20:08:37 2013] Using EEF radius (= 13.74 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:37 2013] Initial guess for spatial extent in simple fitting = 13.74"
[Sat Jun 15 20:08:37 2013] source mask rpix=3.2, npix_max = 53, mask sum = 53, frac = 0.990
[Sat Jun 15 20:08:37 2013] Giving source the simple spatial ID 37 for pass 0, mean size = 13.74"
[Sat Jun 15 20:08:38 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src37.ximg exists
[Sat Jun 15 20:08:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src37.csv
[Sat Jun 15 20:08:38 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src37_1.ximg exists
[Sat Jun 15 20:08:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src37.csv
[Sat Jun 15 20:08:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:40 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sat Jun 15 20:08:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat Jun 15 20:08:40 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sat Jun 15 20:08:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Sat Jun 15 20:08:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:12 2013] Warning, spatial fit 37 centroid is now closest to src. 44
[Sat Jun 15 20:09:12 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:12 2013] Assessing source extent using major
[Sat Jun 15 20:09:12 2013] Source does appear to be extended
[Sat Jun 15 20:09:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:06 2013] Using EEF radius (= 13.74 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:06 2013] Initial guess for spatial extent in simple fitting = 13.74"
[Sat Jun 15 20:10:06 2013] source mask rpix=3.2, npix_max = 53, mask sum = 53, frac = 0.990
[Sat Jun 15 20:10:06 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 13.74"
[Sat Jun 15 20:10:08 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src36.ximg exists
[Sat Jun 15 20:10:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src36.csv
[Sat Jun 15 20:10:08 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src36_1.ximg exists
[Sat Jun 15 20:10:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src36.csv
[Sat Jun 15 20:10:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:10 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sat Jun 15 20:10:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sat Jun 15 20:10:10 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sat Jun 15 20:10:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sat Jun 15 20:10:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:42 2013] Source 43 is offset by 4.087386 and 5.482856 pixels which is larger than
2 X fitted extent = 1.601876 x 1.601876, not incorporating fit results
[Sat Jun 15 20:10:42 2013] Warning, spatial fit 36 centroid is now closest to src. 46
[Sat Jun 15 20:10:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:43 2013] Assessing source extent using major
[Sat Jun 15 20:10:43 2013] Source does appear to be extended
[Sat Jun 15 20:10:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:11:39 2013] XMMSAS src. selection expression = ellipse(16745.108566, 40871.820435, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 20:11:39 2013] Not overwriting source region fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43_src.reg
[Sat Jun 15 20:11:39 2013] Extracting stamp from image fullrun_pn_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (156, 433) - (231, 508)
[Sat Jun 15 20:11:39 2013] XMMSAS bgd. selection expression = annulus(16745.108566, 40871.820435, 1087.500000, 2175.000000, X, Y) && !ellipse(17543.242233, 41458.353577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17732.896286, 42044.918579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17059.270218, 40129.875153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16722.445236, 39583.140900, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 20:11:39 2013] Writing fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43.gif
[Sat Jun 15 20:12:07 2013] ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43_src.evt and ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43_bgd.evt exist, delete to re-create
[Sat Jun 15 20:12:08 2013] Mean detx,y = (-17826.45, -3345.25) 
[Sat Jun 15 20:12:08 2013] ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43_src.img and ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43_bgd.img exist, delete to re-create
[Sat Jun 15 20:12:08 2013] ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43_bgd.pi exist, delete to re-create
[Sat Jun 15 20:12:08 2013] Setting source spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Jun 15 20:12:08 2013] Setting bgd. spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sat Jun 15 20:12:08 2013] ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43_bgd.lc exist, delete to re-create
[Sun Jun 16 00:43:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 00:43:19 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:36:19 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:36:19 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 1338.00
[Sun Jun 16 03:36:20 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43_bgd.pi.gz = 2451.00
[Sun Jun 16 03:36:20 2013] Got source and background scale factors 1067042.000000, 2821590.000000
[Sun Jun 16 03:36:20 2013] User source parameters:
  Position = (193.0, 470.3) = 5 37 12.83 -69 4 2.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 411.1 +/- 37.6
  Background aperture counts = 926.9
  Rate = 0.004 +/- 0.0004

[Sun Jun 16 03:36:20 2013] Updating counts from extracted products
[Sun Jun 16 03:36:20 2013] Set source signif. to 411.10/30.44 = 13.50
[Sun Jun 16 03:37:13 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:13 2013] Using photon index=1.80, rate=0.00448, arf fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43.arf
[Sun Jun 16 03:37:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:13 2013] Updating source flux to 7.5e-14
[Sun Jun 16 03:39:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:40:54 2013] xmm0556350101/analysis//spectral/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete