[Sat Jun 15 20:07:32 2013] Detection parameters:
  Position = (195.6, 474.8) = 5 37 10.75 -69 3 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.8 +/- 22.8
  Background counts = 216.5
  Rate = 0.001 +/- 0.0002

[Sat Jun 15 20:07:38 2013] Off-axis axis estimate = 14.80'
[Sat Jun 15 20:08:37 2013] Using EEF radius (= 13.83 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:37 2013] Initial guess for spatial extent in simple fitting = 13.83"
[Sat Jun 15 20:08:37 2013] source mask rpix=3.2, npix_max = 54, mask sum = 44, frac = 0.813
[Sat Jun 15 20:08:37 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 13.83"
[Sat Jun 15 20:08:38 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src35.ximg exists
[Sat Jun 15 20:08:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src35.csv
[Sat Jun 15 20:08:38 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src35_1.ximg exists
[Sat Jun 15 20:08:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src35.csv
[Sat Jun 15 20:08:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:40 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sat Jun 15 20:08:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sat Jun 15 20:08:40 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sat Jun 15 20:08:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sat Jun 15 20:08:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:12 2013] Warning, spatial fit 35 centroid is now closest to src. 40
[Sat Jun 15 20:09:12 2013] Source 41 is offset by 3.784837 and -0.045519 pixels which is larger than
2 X fitted extent = 1.873025 x 1.873025, not incorporating fit results
[Sat Jun 15 20:09:12 2013] Source 41 is offset by -4.364611 and 1.828412 pixels which is larger than
2 X fitted extent = 1.553177 x 1.553177, not incorporating fit results
[Sat Jun 15 20:09:12 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:12 2013] Assessing source extent using major
[Sat Jun 15 20:09:12 2013] Source does appear to be extended
[Sat Jun 15 20:09:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:12 2013] Deleting source due to low Poisson probability 0.9