[Sat Jun 15 20:07:31 2013] Detection parameters:
  Position = (241.9, 366.1) = 5 36 33.40 -69 11 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 599.6 +/- 41.6
  Background counts = 386.2
  Rate = 0.01 +/- 0.0008

[Sat Jun 15 20:07:38 2013] Off-axis axis estimate = 6.39'
[Sat Jun 15 20:08:37 2013] Using EEF radius (= 9.62 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:37 2013] Initial guess for spatial extent in simple fitting = 9.62"
[Sat Jun 15 20:08:37 2013] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.223
[Sat Jun 15 20:08:37 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 9.62"
[Sat Jun 15 20:08:38 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src19.ximg exists
[Sat Jun 15 20:08:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src19.csv
[Sat Jun 15 20:08:38 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Jun 15 20:08:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src19.csv
[Sat Jun 15 20:08:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:40 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Jun 15 20:08:40 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Jun 15 20:08:40 2013] Fit fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Jun 15 20:09:12 2013] Spatial fit model total counts = 5318.520000, observed total counts = 5321.000000
[Sat Jun 15 20:09:12 2013] Offset between fit and detection position for source 24 = 0.203503 pixels
[Sat Jun 15 20:09:12 2013] 5214.100000 total counts/ 5007.370000 bgd. counts: snr = 2.921451
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.203503 pixels
  Position = (241.9, 365.9) = 5 36 33.44 -69 11 42.3
  Extent = 4.4 (3.6-5.2)", rotation angle = 0
  Source counts = 206.7 +/- 72.2
  Background counts = 5007.4
  Rate = 0.002 +/- 0.0008
[Sat Jun 15 20:09:12 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:12 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:09:12 2013] Source does appear to be extended
[Sat Jun 15 20:09:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:12 2013] Source is confused with source 62
[Sat Jun 15 20:10:06 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:06 2013] Initial guess for spatial extent in simple fitting = 4.41"
[Sat Jun 15 20:10:06 2013] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.983
[Sat Jun 15 20:10:06 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 4.41"
[Sat Jun 15 20:10:07 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src19.ximg exists
[Sat Jun 15 20:10:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src19.csv
[Sat Jun 15 20:10:07 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Jun 15 20:10:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src19.csv
[Sat Jun 15 20:10:08 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:10 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Jun 15 20:10:10 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Jun 15 20:10:10 2013] Fit fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Jun 15 20:10:42 2013] Spatial fit model total counts = 5319.830000, observed total counts = 5316.000000
[Sat Jun 15 20:10:42 2013] Offset between fit and detection position for source 24 = 0.021911 pixels
[Sat Jun 15 20:10:42 2013] 5291.417000 total counts/ 5089.300000 bgd. counts: snr = 2.833178
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 0.021911 pixels
  Position = (241.9, 365.9) = 5 36 33.46 -69 11 42.3
  Extent = 4.3 (3.5-5.1)", rotation angle = 0
  Source counts = 202.1 +/- 72.7
  Background counts = 5089.3
  Rate = 0.002 +/- 0.0008
[Sat Jun 15 20:10:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:43 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:10:43 2013] Source does appear to be extended
[Sat Jun 15 20:10:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:11:37 2013] XMMSAS src. selection expression = ellipse(20993.562600, 31783.769040, 260.940608, 260.940608, 0.000000, X, Y)
[Sat Jun 15 20:11:37 2013] Not overwriting source region fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24_src.reg
[Sat Jun 15 20:11:37 2013] Extracting stamp from image fullrun_pn_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (227, 351) - (257, 381)
[Sat Jun 15 20:11:37 2013] XMMSAS bgd. selection expression = annulus(20993.562600, 31783.769040, 434.901013, 869.802025, X, Y) && !ellipse(22293.636000, 34138.744000, 1634.088047, 1634.088047, 0.000000, X, Y) && !ellipse(22836.593360, 30101.492800, 1025.112029, 1025.112029, 0.000000, X, Y) && !ellipse(23100.154000, 33960.860000, 3321.280096, 3321.280096, 0.000000, X, Y) && !ellipse(20529.086800, 32586.249200, 894.216026, 894.216026, 0.000000, X, Y) && !ellipse(21723.340271, 32751.567322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20421.718000, 32333.010000, 1598.904046, 1598.904046, 0.000000, X, Y) && !ellipse(21955.587631, 30557.607758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19782.388980, 30606.997800, 902.784026, 902.784026, 0.000000, X, Y) && !ellipse(20830.706146, 30919.788269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22196.372200, 29950.737200, 997.056029, 997.056029, 0.000000, X, Y)
[Sat Jun 15 20:11:37 2013] Writing fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24.gif
[Sat Jun 15 20:11:59 2013] ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24_src.evt and ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24_bgd.evt exist, delete to re-create
[Sat Jun 15 20:12:00 2013] Mean detx,y = (-8657.52, 485.14) 
[Sat Jun 15 20:12:00 2013] ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24_src.img and ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24_bgd.img exist, delete to re-create
[Sat Jun 15 20:12:00 2013] ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24_bgd.pi exist, delete to re-create
[Sat Jun 15 20:12:00 2013] Setting source spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Jun 15 20:12:00 2013] Setting bgd. spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sat Jun 15 20:12:00 2013] ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24_bgd.lc exist, delete to re-create
[Sun Jun 16 03:36:11 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:36:11 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 742.00
[Sun Jun 16 03:36:11 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24_bgd.pi.gz = 0.00
[Sun Jun 16 03:36:12 2013] Got source and background scale factors 212800.000000, 0.000000
[Sun Jun 16 03:36:12 2013] Background scale factor is not positive, halting re-assessment of this source
[Sun Jun 16 03:37:12 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:12 2013] Using photon index=1.80, rate=0.0022, arf fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24.arf
[Sun Jun 16 03:37:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:12 2013] Updating source flux to 2.1e-14
[Sun Jun 16 03:39:35 2013] Flag c found in src. 24 procflags, skipping spectral fitting
[Sun Jun 16 03:40:54 2013] xmm0556350101/analysis//spectral/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete