[Sat Jun 15 20:07:31 2013] Detection parameters:
  Position = (305.2, 385.7) = 5 35 41.75 -69 10 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 590.9 +/- 37.3
  Background counts = 306.2
  Rate = 0.01 +/- 0.0007

[Sat Jun 15 20:07:38 2013] Off-axis axis estimate = 6.34'
[Sat Jun 15 20:08:37 2013] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:37 2013] Initial guess for spatial extent in simple fitting = 9.60"
[Sat Jun 15 20:08:37 2013] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.921
[Sat Jun 15 20:08:37 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 9.60"
[Sat Jun 15 20:08:38 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src17.ximg exists
[Sat Jun 15 20:08:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src17.csv
[Sat Jun 15 20:08:38 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Jun 15 20:08:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src17.csv
[Sat Jun 15 20:08:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:40 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Jun 15 20:08:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat Jun 15 20:08:40 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Jun 15 20:08:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src17.csv
[Sat Jun 15 20:08:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:12 2013] Warning, spatial fit 17 centroid is now closest to src. 56
[Sat Jun 15 20:09:12 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:12 2013] Assessing source extent using major
[Sat Jun 15 20:09:12 2013] Source does appear to be extended
[Sat Jun 15 20:09:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:12 2013] Source is confused with source 19
[Sat Jun 15 20:10:06 2013] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:06 2013] Initial guess for spatial extent in simple fitting = 9.60"
[Sat Jun 15 20:10:06 2013] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.921
[Sat Jun 15 20:10:06 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 9.60"
[Sat Jun 15 20:10:07 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src17.ximg exists
[Sat Jun 15 20:10:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src17.csv
[Sat Jun 15 20:10:07 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Jun 15 20:10:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src17.csv
[Sat Jun 15 20:10:07 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:10 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Jun 15 20:10:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat Jun 15 20:10:10 2013] fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Jun 15 20:10:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src17.csv
[Sat Jun 15 20:10:10 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:42 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 30.924672 pixels away
[Sat Jun 15 20:10:42 2013] Spatial fit model total counts = 6204.390000, observed total counts = 4696.000000
[Sat Jun 15 20:10:42 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:10:43 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:43 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:43 2013] Assessing source extent using major
[Sat Jun 15 20:10:43 2013] Source does appear to be extended
[Sat Jun 15 20:10:43 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:11:37 2013] XMMSAS src. selection expression = ellipse(26503.582458, 33504.446014, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 15 20:11:37 2013] Not overwriting source region fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22_src.reg
[Sat Jun 15 20:11:37 2013] Extracting stamp from image fullrun_pn_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (268, 348) - (343, 423)
[Sat Jun 15 20:11:37 2013] XMMSAS bgd. selection expression = annulus(26503.582458, 33504.446014, 1087.500000, 2175.000000, X, Y) && !ellipse(23668.921844, 31743.041168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25750.690000, 34377.199000, 1586.800046, 1586.800046, 0.000000, X, Y) && !ellipse(23100.154000, 33960.860000, 3321.280096, 3321.280096, 0.000000, X, Y) && !ellipse(23934.098000, 35565.294000, 1660.640048, 1660.640048, 0.000000, X, Y) && !ellipse(24354.731842, 34849.428101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27140.568000, 32961.488000, 1483.768043, 1483.768043, 0.000000, X, Y) && !ellipse(26421.066000, 31561.836000, 1360.640039, 1360.640039, 0.000000, X, Y) && !ellipse(27672.548600, 31958.653000, 1204.376035, 1204.376035, 0.000000, X, Y) && !ellipse(26450.191200, 31588.529000, 370.739211, 370.739211, 0.000000, X, Y) && !ellipse(26650.737457, 30841.995911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24031.112976, 30482.956299, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 15 20:11:37 2013] Writing fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22.gif
[Sat Jun 15 20:11:59 2013] ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0556350101/products/events/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Sat Jun 15 20:11:59 2013] Mean detx,y = (-5747.39, -4504.28) 
[Sat Jun 15 20:11:59 2013] ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22_src.img and ../../xmm0556350101/products/images/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Sat Jun 15 20:11:59 2013] ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Sat Jun 15 20:11:59 2013] Setting source spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Jun 15 20:11:59 2013] Setting bgd. spectrum file to fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat Jun 15 20:11:59 2013] ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Sun Jun 16 00:04:00 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 00:04:00 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:36:10 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:36:10 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 3058.00
[Sun Jun 16 03:36:11 2013] Total counts from fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22_bgd.pi.gz = 1203.00
[Sun Jun 16 03:36:11 2013] Got source and background scale factors 1068120.000000, 1269992.000000
[Sun Jun 16 03:36:11 2013] User source parameters:
  Position = (305.2, 385.7) = 5 35 41.75 -69 10 13.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2046.2 +/- 56.3
  Background aperture counts = 1011.8
  Rate = 0.02 +/- 0.0006

[Sun Jun 16 03:36:11 2013] Updating counts from extracted products
[Sun Jun 16 03:36:11 2013] Set source signif. to 2046.22/31.81 = 64.33
[Sun Jun 16 03:37:12 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:12 2013] Using photon index=1.80, rate=0.0223, arf fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22.arf
[Sun Jun 16 03:37:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:12 2013] Updating source flux to 1.6e-13
[Sun Jun 16 03:39:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:40:54 2013] xmm0556350101/analysis//spectral/fullrun_pn_xmm0556350101_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete