[Sat Jun 15 20:07:46 2013] Detection parameters: Position = (280.6, 110.6) = 5 36 2.06 -69 30 15.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 106.1 +/- 16.4 Background counts = 53.6 Rate = 0.001 +/- 0.0002 [Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 13.68' [Sat Jun 15 20:08:46 2013] Using EEF radius (= 13.27 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 13.27" [Sat Jun 15 20:08:46 2013] source mask rpix=3.1, npix_max = 50, mask sum = 37, frac = 0.734 [Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 75 for pass 0, mean size = 13.27" [Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src75.ximg exists [Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src75.csv [Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src75_1.ximg exists [Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src75.csv [Sat Jun 15 20:08:48 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src75_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:08:50 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src75.ximg exists [Sat Jun 15 20:08:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src75.csv [Sat Jun 15 20:08:50 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists [Sat Jun 15 20:08:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src75.csv [Sat Jun 15 20:08:50 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src75_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:09:40 2013] Spatial fit model total counts = 828.447000, observed total counts = 517.000000 [Sat Jun 15 20:09:40 2013] Poor agreement between spatial fit and data for source 93 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:09:40 2013] Assessing source extent using major [Sat Jun 15 20:09:40 2013] Source does appear to be extended [Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:10:14 2013] Using EEF radius (= 13.27 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 13.27" [Sat Jun 15 20:10:14 2013] source mask rpix=3.1, npix_max = 50, mask sum = 37, frac = 0.734 [Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 13.27" [Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src60.ximg exists [Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src60.csv [Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src60_1.ximg exists [Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src60.csv [Sat Jun 15 20:10:16 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src60_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src60.ximg exists [Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src60.csv [Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists [Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src60.csv [Sat Jun 15 20:10:17 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src60_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:11:07 2013] Spatial fit model total counts = 1325.290000, observed total counts = 783.000000 [Sat Jun 15 20:11:07 2013] Poor agreement between spatial fit and data for source 93 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:11:07 2013] Assessing source extent using major [Sat Jun 15 20:11:07 2013] Source does appear to be extended [Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 16 03:32:00 2013] XMMSAS src. selection expression = ellipse(24361.486237, 9574.050331, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 16 03:32:00 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93_src.reg [Sun Jun 16 03:32:00 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (243, 73) - (318, 148) [Sun Jun 16 03:32:00 2013] XMMSAS bgd. selection expression = annulus(24361.486237, 9574.050331, 1087.500000, 2175.000000, X, Y) && !ellipse(22794.904785, 10044.147163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22721.498535, 10467.780319, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 16 03:32:00 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93.gif [Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93_bgd.evt exist, delete to re-create [Sun Jun 16 03:32:05 2013] Mean detx,y = (-8776.39, -14531.38) [Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93_bgd.img exist, delete to re-create [Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93_bgd.pi exist, delete to re-create [Sun Jun 16 03:32:05 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93_src_b10.pi.gz [Sun Jun 16 03:32:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93_bgd.pi.gz [Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93_bgd.lc exist, delete to re-create [Sun Jun 16 03:32:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 16 03:32:28 2013] rmf not generated due to insufficient counts [Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93.arf exists, delete to re-create [Sun Jun 16 03:37:58 2013] Updating aperture counts using extracted products [Sun Jun 16 03:37:58 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93_src_b10.pi.gz = 370.00 [Sun Jun 16 03:37:58 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93_bgd.pi.gz = 1540.00 [Sun Jun 16 03:37:58 2013] Got source and background scale factors 916268.000000, 4323205.000000 [Sun Jun 16 03:37:58 2013] User source parameters: Position = (280.6, 110.6) = 5 36 2.06 -69 30 15.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 43.6 +/- 20.3 Background aperture counts = 326.4 Rate = 0.0004 +/- 0.0002 [Sun Jun 16 03:37:58 2013] Updating counts from extracted products [Sun Jun 16 03:37:58 2013] Set source signif. to 43.61/18.07 = 2.41 [Sun Jun 16 03:38:07 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 03:38:07 2013] Using photon index=1.80, rate=0.00043, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93.arf [Sun Jun 16 03:38:07 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 03:38:07 2013] Updating source flux to 1.8e-14 [Sun Jun 16 03:38:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src93_pl.csv not found, spectral fit skipped or did not complete