[Sat Jun 15 20:07:46 2013] Detection parameters:
  Position = (225.7, 157.0) = 5 36 47.34 -69 26 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 102.2 +/- 17.5
  Background counts = 82.5
  Rate = 0.001 +/- 0.0002

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 11.53'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 12.19"
[Sat Jun 15 20:08:46 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.962
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 77 for pass 0, mean size = 12.19"
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src77.ximg exists
[Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src77.csv
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src77_1.ximg exists
[Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src77.csv
[Sat Jun 15 20:08:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:50 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Sat Jun 15 20:08:50 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Sat Jun 15 20:08:50 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly
[Sat Jun 15 20:09:40 2013] Warning, spatial fit 77 centroid is now closest to src. 87
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:14 2013] Using EEF radius (= 12.19 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 12.19"
[Sat Jun 15 20:10:14 2013] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.962
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 62 for pass 1, mean size = 12.19"
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src62.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src62.csv
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src62_1.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src62.csv
[Sat Jun 15 20:10:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Sat Jun 15 20:10:17 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Sat Jun 15 20:11:07 2013] Warning: source 62 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 88 at 14.146736 pixels away
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:11:07 2013] Source is confused with source 10
[Sun Jun 16 03:32:00 2013] XMMSAS src. selection expression = ellipse(19588.512192, 13607.611328, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:32:00 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88_src.reg
[Sun Jun 16 03:32:00 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (188, 119) - (263, 194)
[Sun Jun 16 03:32:00 2013] XMMSAS bgd. selection expression = annulus(19588.512192, 13607.611328, 1087.500000, 2175.000000, X, Y) && !ellipse(19095.316000, 13195.320000, 496.408814, 496.408814, 0.000000, X, Y) && !ellipse(20635.658000, 11178.662200, 322.625609, 322.625609, 0.000000, X, Y) && !ellipse(18572.952000, 12609.826000, 559.832816, 559.832816, 0.000000, X, Y) && !ellipse(17337.557114, 13548.489136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17532.762500, 13814.188000, 1649.504047, 979.464028, 304.911000, X, Y) && !ellipse(21250.746384, 10913.316803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21053.874634, 11340.172501, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 03:32:00 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88.gif
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:05 2013] Mean detx,y = (-2568.92, -15046.66) 
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:05 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88_src_b10.pi.gz
[Sun Jun 16 03:32:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88_bgd.pi.gz
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 03:32:28 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88.arf exists, delete to re-create
[Sun Jun 16 03:37:58 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:58 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88_src_b10.pi.gz = 760.00
[Sun Jun 16 03:37:58 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88_bgd.pi.gz = 3494.00
[Sun Jun 16 03:37:58 2013] Got source and background scale factors 1265444.000000, 7872888.000000
[Sun Jun 16 03:37:58 2013] User source parameters:
  Position = (225.7, 157.0) = 5 36 47.34 -69 26 50.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 198.4 +/- 28.6
  Background aperture counts = 561.6
  Rate = 0.002 +/- 0.0003

[Sun Jun 16 03:37:58 2013] Updating counts from extracted products
[Sun Jun 16 03:37:58 2013] Set source signif. to 198.39/23.70 = 8.37
[Sun Jun 16 03:38:07 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:07 2013] Using photon index=1.80, rate=0.00195, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88.arf
[Sun Jun 16 03:38:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:07 2013] Updating source flux to 6.1e-14
[Sun Jun 16 03:38:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src88_pl.csv not found, spectral fit skipped or did not complete