[Sat Jun 15 20:07:46 2013] Detection parameters:
  Position = (184.1, 169.9) = 5 37 21.67 -69 25 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.9 +/- 18.9
  Background counts = 77.8
  Rate = 0.001 +/- 0.0002

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 12.48'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 12.67"
[Sat Jun 15 20:08:46 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.902
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 82 for pass 0, mean size = 12.67"
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src82.ximg exists
[Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src82.csv
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src82_1.ximg exists
[Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src82.csv
[Sat Jun 15 20:08:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:50 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src82.ximg exists
[Sat Jun 15 20:08:50 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src82_1.ximg exists
[Sat Jun 15 20:08:50 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src82 appears to have run properly
[Sat Jun 15 20:09:40 2013] Source 86 is offset by 0.557333 and -4.776207 pixels which is larger than
2 X fitted extent = 1.474487 x 1.474487, not incorporating fit results
[Sat Jun 15 20:09:40 2013] Warning, spatial fit 82 centroid is now closest to src. 83
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:40 2013] Source is confused with source 8
[Sat Jun 15 20:10:14 2013] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 12.67"
[Sat Jun 15 20:10:14 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.902
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 67 for pass 1, mean size = 12.67"
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src67.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src67.csv
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src67_1.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src67.csv
[Sat Jun 15 20:10:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Sat Jun 15 20:10:17 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Sat Jun 15 20:11:07 2013] Warning, spatial fit 67 centroid is now closest to src. 8
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:32:01 2013] XMMSAS src. selection expression = ellipse(15965.481781, 14728.874008, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:32:01 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86_src.reg
[Sun Jun 16 03:32:01 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (147, 132) - (222, 207)
[Sun Jun 16 03:32:01 2013] XMMSAS bgd. selection expression = annulus(15965.481781, 14728.874008, 1087.500000, 2175.000000, X, Y) && !ellipse(18572.952000, 12609.826000, 559.832816, 559.832816, 0.000000, X, Y) && !ellipse(16094.744400, 14300.926000, 1267.176036, 1267.176036, 0.000000, X, Y) && !ellipse(17337.557114, 13548.489136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17532.762500, 13814.188000, 1649.504047, 979.464028, 304.911000, X, Y)
[Sun Jun 16 03:32:01 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86.gif
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:05 2013] Mean detx,y = (692.15, -16686.71) 
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:05 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86_src_b10.pi.gz
[Sun Jun 16 03:32:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86_bgd.pi.gz
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] Not generating rmf since there are only 96 counts
[Sun Jun 16 03:32:28 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86.arf exists, delete to re-create
[Sun Jun 16 03:38:00 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:38:00 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86_src_b10.pi.gz = 859.00
[Sun Jun 16 03:38:00 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86_bgd.pi.gz = 1922.00
[Sun Jun 16 03:38:00 2013] Got source and background scale factors 1329600.000000, 4163196.000000
[Sun Jun 16 03:38:00 2013] User source parameters:
  Position = (184.1, 169.9) = 5 37 21.67 -69 25 50.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 245.2 +/- 30.3
  Background aperture counts = 613.8
  Rate = 0.002 +/- 0.0003

[Sun Jun 16 03:38:00 2013] Updating counts from extracted products
[Sun Jun 16 03:38:00 2013] Set source signif. to 245.17/24.78 = 9.90
[Sun Jun 16 03:38:07 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:07 2013] Using photon index=1.80, rate=0.00241, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86.arf
[Sun Jun 16 03:38:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:07 2013] Updating source flux to 8.7e-14
[Sun Jun 16 03:38:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src86_pl.csv not found, spectral fit skipped or did not complete