[Sat Jun 15 20:07:42 2013] Detection parameters:
  Position = (185.1, 163.1) = 5 37 20.87 -69 26 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 255.9 +/- 22.9
  Background counts = 75.0
  Rate = 0.003 +/- 0.0002

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 12.80'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 12.83 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 12.83"
[Sat Jun 15 20:08:46 2013] source mask rpix=2.9, npix_max = 47, mask sum = 48, frac = 1.009
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 12.83"
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src27.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src27.csv
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src27.csv
[Sat Jun 15 20:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sat Jun 15 20:08:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sat Jun 15 20:08:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sat Jun 15 20:08:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:40 2013] Warning, spatial fit 27 centroid is now closest to src. 86
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:40 2013] Source is confused with source 86
[Sat Jun 15 20:10:14 2013] Using EEF radius (= 12.83 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 12.83"
[Sat Jun 15 20:10:14 2013] source mask rpix=2.9, npix_max = 47, mask sum = 48, frac = 1.009
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 12.83"
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src27.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src27.csv
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src27_1.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src27.csv
[Sat Jun 15 20:10:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src27.csv
[Sat Jun 15 20:10:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:11:07 2013] Warning, spatial fit 27 centroid is now closest to src. 83
[Sat Jun 15 20:11:07 2013] Spatial fit model total counts = 1832.840000, observed total counts = 1681.000000
[Sat Jun 15 20:11:07 2013] Offset between fit and detection position for source 8 = 1.898654 pixels
[Sat Jun 15 20:11:07 2013] Warning, changing simple spatial fit ID from 27 to 67
[Sat Jun 15 20:11:07 2013] 1805.223000 total counts/ 1057.750000 bgd. counts: snr = 22.982856
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 1.898654 pixels
  Position = (185.6, 164.9) = 5 37 20.47 -69 26 15.3
  Extent = 15.8 (13.4-17.4)", rotation angle = 0
  Source counts = 747.5 +/- 42.5
  Background counts = 1057.8
  Rate = 0.007 +/- 0.0004
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:59 2013] XMMSAS src. selection expression = ellipse(16094.744400, 14300.926000, 950.382027, 950.382027, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8_src.reg
[Sun Jun 16 03:31:59 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (131, 110) - (240, 220)
[Sun Jun 16 03:31:59 2013] XMMSAS bgd. selection expression = annulus(16094.744400, 14300.926000, 1583.970046, 3167.940091, X, Y) && !ellipse(19095.316000, 13195.320000, 496.408814, 496.408814, 0.000000, X, Y) && !ellipse(18572.952000, 12609.826000, 559.832816, 559.832816, 0.000000, X, Y) && !ellipse(17337.557114, 13548.489136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17532.762500, 13814.188000, 1649.504047, 979.464028, 304.911000, X, Y) && !ellipse(19588.512192, 13607.611328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15965.481781, 14728.874008, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8.gif
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:03 2013] Mean detx,y = (501.02, -16730.87) 
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:03 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jun 16 03:32:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8.rmf exists, delete to re-create
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8.arf exists, delete to re-create
[Sun Jun 16 03:37:47 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:47 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 1181.00
[Sun Jun 16 03:37:47 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8_bgd.pi.gz = 4208.00
[Sun Jun 16 03:37:47 2013] Got source and background scale factors 2134037.000000, 8776215.000000
[Sun Jun 16 03:37:48 2013] User source parameters:
  Position = (185.6, 164.9) = 5 37 20.47 -69 26 15.3
  Extent = 15.8 (13.4-17.4)", rotation angle = 0
  Source aperture counts = 157.8 +/- 35.4
  Background aperture counts = 1023.2
  Rate = 0.002 +/- 0.0003

[Sun Jun 16 03:38:04 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:04 2013] Using photon index=1.80, rate=0.00736, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8.arf
[Sun Jun 16 03:38:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:04 2013] Updating source flux to 2.5e-13
[Sun Jun 16 03:38:53 2013] Flag c found in src. 8 procflags, skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete