[Sat Jun 15 20:07:42 2013] Detection parameters:
  Position = (303.1, 282.2) = 5 35 43.44 -69 17 52.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 557.7 +/- 36.3
  Background counts = 135.1
  Rate = 0.007 +/- 0.0005

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 1.22'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 7.04"
[Sat Jun 15 20:08:46 2013] source mask rpix=1.6, npix_max = 17, mask sum = 12, frac = 0.668
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.04"
[Sat Jun 15 20:08:46 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 15 20:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src5.csv
[Sat Jun 15 20:08:46 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 15 20:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src5.csv
[Sat Jun 15 20:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 15 20:08:48 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun 15 20:09:40 2013] Spatial fit model total counts = 3486.230000, observed total counts = 3263.000000
[Sat Jun 15 20:09:40 2013] Offset between fit and detection position for source 7 = 0.639051 pixels
[Sat Jun 15 20:09:40 2013] 3279.814000 total counts/ 3167.750000 bgd. counts: snr = 1.991089
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.639051 pixels
  Position = (302.6, 282.6) = 5 35 43.88 -69 17 45.1
  Extent = 4.3 (3.4-5.6)", rotation angle = 0
  Source counts = 112.1 +/- 57.3
  Background counts = 3167.8
  Rate = 0.001 +/- 0.0006
[Sat Jun 15 20:09:40 2013] Spatial fit model total counts = 3379.420000, observed total counts = 3118.000000
[Sat Jun 15 20:09:40 2013] Offset between fit and detection position for source 7 = 0.197384 pixels
[Sat Jun 15 20:09:40 2013] Warning, changing simple spatial fit ID from 5 to 26
[Sat Jun 15 20:09:40 2013] 3374.382000 total counts/ 3249.000000 bgd. counts: snr = 2.199684
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.197384 pixels
  Position = (302.5, 282.4) = 5 35 43.95 -69 17 45.9
  Extent = 4.5 (3.5-6.1)", rotation angle = 0
  Source counts = 125.4 +/- 58.1
  Background counts = 3249.0
  Rate = 0.001 +/- 0.0006
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:40 2013] Source is confused with source 50
[Sat Jun 15 20:10:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 4.49"
[Sat Jun 15 20:10:14 2013] source mask rpix=1.0, npix_max = 9, mask sum = 8, frac = 0.852
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 4.49"
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src5.csv
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src5.csv
[Sat Jun 15 20:10:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 15 20:10:16 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun 15 20:11:07 2013] Spatial fit model total counts = 3540.230000, observed total counts = 3310.000000
[Sat Jun 15 20:11:07 2013] Offset between fit and detection position for source 7 = 0.154644 pixels
[Sat Jun 15 20:11:07 2013] 3379.759000 total counts/ 3274.130000 bgd. counts: snr = 1.846015
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.154644 pixels
  Position = (302.5, 282.5) = 5 35 43.90 -69 17 45.3
  Extent = 4.2 (3.3-5.1)", rotation angle = 0
  Source counts = 105.6 +/- 58.1
  Background counts = 3274.1
  Rate = 0.001 +/- 0.0006
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:58 2013] XMMSAS src. selection expression = ellipse(26273.199200, 24531.572400, 252.043207, 252.043207, 0.000000, X, Y)
[Sun Jun 16 03:31:58 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7_src.reg
[Sun Jun 16 03:31:58 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (288, 268) - (317, 297)
[Sun Jun 16 03:31:58 2013] XMMSAS bgd. selection expression = annulus(26273.199200, 24531.572400, 420.072012, 840.144024, X, Y) && !ellipse(27979.186820, 26398.281190, 1299.067237, 1299.067237, 0.000000, X, Y) && !ellipse(25894.558563, 23671.505188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26409.542000, 24840.438000, 1072.152031, 1072.152031, 0.000000, X, Y) && !ellipse(26331.119720, 23472.571808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27752.348938, 24972.472198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25854.982697, 25264.546661, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 03:31:58 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7.gif
[Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:02 2013] Mean detx,y = (-20.55, -2402.23) 
[Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:02 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sun Jun 16 03:32:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7.rmf exists, delete to re-create
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7.arf exists, delete to re-create
[Sun Jun 16 03:37:40 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:40 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 456.00
[Sun Jun 16 03:37:40 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 0.00
[Sun Jun 16 03:37:40 2013] Got source and background scale factors 181904.000000, 0.000000
[Sun Jun 16 03:37:40 2013] Background scale factor is not positive, halting re-assessment of this source
[Sun Jun 16 03:38:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:03 2013] Using photon index=1.80, rate=0.00104, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7.arf
[Sun Jun 16 03:38:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:03 2013] Updating source flux to 1.9e-14
[Sun Jun 16 03:38:53 2013] Flag c found in src. 7 procflags, skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete