[Sat Jun 15 20:07:45 2013] Detection parameters: Position = (227.9, 272.9) = 5 36 45.18 -69 18 25.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 97.7 +/- 17.5 Background counts = 83.7 Rate = 0.001 +/- 0.0003 [Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 5.44' [Sat Jun 15 20:08:46 2013] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 9.15" [Sat Jun 15 20:08:46 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.922 [Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 59 for pass 0, mean size = 9.15" [Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src59.ximg exists [Sat Jun 15 20:08:47 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src59.csv [Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src59_1.ximg exists [Sat Jun 15 20:08:48 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src59.csv [Sat Jun 15 20:08:48 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src59_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src59.ximg exists [Sat Jun 15 20:08:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src59.csv [Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg exists [Sat Jun 15 20:08:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src59.csv [Sat Jun 15 20:08:49 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src59_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:09:40 2013] Warning, spatial fit 59 centroid is now closest to src. 48 [Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:09:40 2013] Assessing source extent using major [Sat Jun 15 20:09:40 2013] Source does appear to be extended [Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:10:14 2013] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 9.15" [Sat Jun 15 20:10:14 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.922 [Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 9.15" [Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src51.ximg exists [Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src51.csv [Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src51_1.ximg exists [Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src51.csv [Sat Jun 15 20:10:15 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src51_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists [Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists [Sat Jun 15 20:10:17 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly [Sat Jun 15 20:11:07 2013] Spatial fit model total counts = 1186.240000, observed total counts = 1130.000000 [Sat Jun 15 20:11:07 2013] Offset between fit and detection position for source 64 = 1.826056 pixels [Sat Jun 15 20:11:07 2013] 1165.492000 total counts/ 887.094000 bgd. counts: snr = 9.347195 Spatial fit parameters: Offset between fit and detection position for source 64 = 1.826056 pixels Position = (229.7, 272.6) = 5 36 43.70 -69 18 27.8 Extent = 18.3 (7.3-36.6)", rotation angle = 0 Source counts = 278.4 +/- 34.1 Background counts = 887.1 Rate = 0.003 +/- 0.0003 [Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:11:07 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:11:07 2013] Source does appear to be extended [Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 16 03:32:00 2013] XMMSAS src. selection expression = ellipse(19933.678800, 23669.182800, 1097.874032, 1097.874032, 0.000000, X, Y) [Sun Jun 16 03:32:00 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64_src.reg [Sun Jun 16 03:32:00 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (167, 210) - (293, 336) [Sun Jun 16 03:32:00 2013] XMMSAS bgd. selection expression = annulus(19933.678800, 23669.182800, 1829.790053, 3659.580105, X, Y) && !ellipse(19287.536743, 26063.102478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15947.081100, 27541.964417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21149.358800, 26898.753200, 729.095221, 729.095221, 0.000000, X, Y) && !ellipse(17889.760727, 23951.958588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18566.992000, 22948.680000, 1571.464045, 1571.464045, 0.000000, X, Y) && !ellipse(22362.182000, 26972.560000, 2356.336068, 2356.336068, 0.000000, X, Y) && !ellipse(17825.171829, 24556.248566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20675.224000, 25354.025600, 1392.216040, 1392.216040, 0.000000, X, Y) [Sun Jun 16 03:32:00 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64.gif [Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64_bgd.evt exist, delete to re-create [Sun Jun 16 03:32:04 2013] Mean detx,y = (4034.08, -7453.26) [Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64_bgd.img exist, delete to re-create [Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64_bgd.pi exist, delete to re-create [Sun Jun 16 03:32:04 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64_src_b10.pi.gz [Sun Jun 16 03:32:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64_bgd.pi.gz [Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64_bgd.lc exist, delete to re-create [Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64.rmf exists, delete to re-create [Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64.arf exists, delete to re-create [Sun Jun 16 03:37:55 2013] Updating aperture counts using extracted products [Sun Jun 16 03:37:55 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64_src_b10.pi.gz = 1946.00 [Sun Jun 16 03:37:55 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64_bgd.pi.gz = 8498.00 [Sun Jun 16 03:37:55 2013] Got source and background scale factors 3152701.000000, 16899437.000000 [Sun Jun 16 03:37:55 2013] User source parameters: Position = (229.7, 272.6) = 5 36 43.70 -69 18 27.8 Extent = 18.3 (7.3-36.6)", rotation angle = 0 Source aperture counts = 360.6 +/- 45.1 Background aperture counts = 1585.4 Rate = 0.004 +/- 0.0004 [Sun Jun 16 03:38:06 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 03:38:06 2013] Using photon index=1.80, rate=0.00274, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64.arf [Sun Jun 16 03:38:06 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 03:38:06 2013] Updating source flux to 4.8e-14 [Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src64_pl.csv not found, spectral fit skipped or did not complete