[Sat Jun 15 20:07:45 2013] Detection parameters:
  Position = (319.5, 287.6) = 5 35 29.95 -69 17 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 186.5 +/- 25.3
  Background counts = 134.8
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 1.72'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun 15 20:08:46 2013] source mask rpix=1.7, npix_max = 18, mask sum = 19, frac = 1.004
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 7.29"
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src31.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src31.csv
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src31.csv
[Sat Jun 15 20:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sat Jun 15 20:08:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sat Jun 15 20:08:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sat Jun 15 20:08:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:40 2013] Source 58 is offset by -2.449047 and -6.789699 pixels which is larger than
2 X fitted extent = 3.611798 x 3.611798, not incorporating fit results
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:14 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun 15 20:10:14 2013] source mask rpix=1.7, npix_max = 18, mask sum = 19, frac = 1.004
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 7.29"
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src31.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src31.csv
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src31_1.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src31.csv
[Sat Jun 15 20:10:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src31.csv
[Sat Jun 15 20:10:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:11:07 2013] Source 58 is offset by -2.449047 and -6.789699 pixels which is larger than
2 X fitted extent = 3.611798 x 3.611798, not incorporating fit results
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:59 2013] XMMSAS src. selection expression = ellipse(27752.348938, 24972.472198, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58_src.reg
[Sun Jun 16 03:31:59 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (282, 250) - (357, 325)
[Sun Jun 16 03:31:59 2013] XMMSAS bgd. selection expression = annulus(27752.348938, 24972.472198, 1087.500000, 2175.000000, X, Y) && !ellipse(27979.186820, 26398.281190, 1299.067237, 1299.067237, 0.000000, X, Y) && !ellipse(26273.199200, 24531.572400, 336.057610, 336.057610, 0.000000, X, Y) && !ellipse(25894.558563, 23671.505188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29024.877930, 26183.221313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28596.000427, 25671.591858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26409.542000, 24840.438000, 1072.152031, 1072.152031, 0.000000, X, Y) && !ellipse(26331.119720, 23472.571808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26965.002655, 27701.574158, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25854.982697, 25264.546661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25631.384094, 22487.131134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25346.170000, 26767.374000, 1107.656032, 1107.656032, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58.gif
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:03 2013] Mean detx,y = (-786.57, -946.53) 
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:03 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Sun Jun 16 03:32:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 03:32:28 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58.arf exists, delete to re-create
[Sun Jun 16 03:37:48 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:48 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58_src_b10.pi.gz = 2112.00
[Sun Jun 16 03:37:49 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58_bgd.pi.gz = 3326.00
[Sun Jun 16 03:37:49 2013] Got source and background scale factors 1111908.000000, 3838400.000000
[Sun Jun 16 03:37:49 2013] User source parameters:
  Position = (319.5, 287.6) = 5 35 29.95 -69 17 16.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1148.5 +/- 47.0
  Background aperture counts = 963.5
  Rate = 0.01 +/- 0.0005

[Sun Jun 16 03:37:49 2013] Updating counts from extracted products
[Sun Jun 16 03:37:49 2013] Set source signif. to 1148.52/31.04 = 37.00
[Sun Jun 16 03:38:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:05 2013] Using photon index=1.80, rate=0.0113, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58.arf
[Sun Jun 16 03:38:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:05 2013] Updating source flux to 1.6e-13
[Sun Jun 16 03:38:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src58_pl.csv not found, spectral fit skipped or did not complete