[Sat Jun 15 20:07:45 2013] Detection parameters:
  Position = (329.2, 295.6) = 5 35 22.01 -69 16 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 255.0 +/- 33.0
  Background counts = 128.0
  Rate = 0.003 +/- 0.0003

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 2.24'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 7.55"
[Sat Jun 15 20:08:46 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.000
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 7.55"
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src22.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src22.csv
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src22_1.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src22.csv
[Sat Jun 15 20:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sat Jun 15 20:08:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sat Jun 15 20:08:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sat Jun 15 20:08:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:40 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 57 at 10.138819 pixels away
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:14 2013] Using EEF radius (= 7.55 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 7.55"
[Sat Jun 15 20:10:14 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.000
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 7.55"
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src22.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src22.csv
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src22_1.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src22.csv
[Sat Jun 15 20:10:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src22.csv
[Sat Jun 15 20:10:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:11:07 2013] Source 57 is offset by -1.761742 and 6.511033 pixels which is larger than
2 X fitted extent = 6.166759 x 6.166759, not incorporating fit results
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:59 2013] XMMSAS src. selection expression = ellipse(28596.000427, 25671.591858, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57_src.reg
[Sun Jun 16 03:31:59 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (292, 258) - (367, 333)
[Sun Jun 16 03:31:59 2013] XMMSAS bgd. selection expression = annulus(28596.000427, 25671.591858, 1087.500000, 2175.000000, X, Y) && !ellipse(27979.186820, 26398.281190, 1299.067237, 1299.067237, 0.000000, X, Y) && !ellipse(26273.199200, 24531.572400, 336.057610, 336.057610, 0.000000, X, Y) && !ellipse(25894.558563, 23671.505188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29024.877930, 26183.221313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26409.542000, 24840.438000, 1072.152031, 1072.152031, 0.000000, X, Y) && !ellipse(26331.119720, 23472.571808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27752.348938, 24972.472198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26965.002655, 27701.574158, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25854.982697, 25264.546661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25346.170000, 26767.374000, 1107.656032, 1107.656032, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57.gif
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:03 2013] Mean detx,y = (-693.74, 7.06) 
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:03 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sun Jun 16 03:32:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 03:32:28 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57.arf exists, delete to re-create
[Sun Jun 16 03:37:46 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:46 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57_src_b10.pi.gz = 5344.00
[Sun Jun 16 03:37:46 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57_bgd.pi.gz = 4114.00
[Sun Jun 16 03:37:46 2013] Got source and background scale factors 1175124.000000, 5384388.000000
[Sun Jun 16 03:37:46 2013] User source parameters:
  Position = (329.2, 295.6) = 5 35 22.01 -69 16 53.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 4446.1 +/- 74.1
  Background aperture counts = 897.9
  Rate = 0.04 +/- 0.0007

[Sun Jun 16 03:37:46 2013] Updating counts from extracted products
[Sun Jun 16 03:37:46 2013] Set source signif. to 4446.13/29.96 = 148.38
[Sun Jun 16 03:38:04 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:04 2013] Using photon index=1.80, rate=0.0438, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57.arf
[Sun Jun 16 03:38:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:04 2013] Updating source flux to 5.3e-13
[Sun Jun 16 03:38:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src57_pl.csv not found, spectral fit skipped or did not complete