[Sat Jun 15 20:07:42 2013] Detection parameters:
  Position = (230.8, 117.1) = 5 36 43.29 -69 29 43.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 219.2 +/- 19.8
  Background counts = 51.7
  Rate = 0.002 +/- 0.0002

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 14.03'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 13.45"
[Sat Jun 15 20:08:46 2013] source mask rpix=3.1, npix_max = 51, mask sum = 40, frac = 0.775
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 13.45"
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src35.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src35.csv
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src35_1.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src35.csv
[Sat Jun 15 20:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Sat Jun 15 20:08:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Sat Jun 15 20:08:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src35.csv
[Sat Jun 15 20:08:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:40 2013] Source 5 is offset by 1.792559 and -4.115354 pixels which is larger than
2 X fitted extent = 3.121908 x 3.121908, not incorporating fit results
[Sat Jun 15 20:09:40 2013] Warning, spatial fit 35 centroid is now closest to src. 90
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:14 2013] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 13.45"
[Sat Jun 15 20:10:14 2013] source mask rpix=3.1, npix_max = 51, mask sum = 40, frac = 0.775
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 34 for pass 1, mean size = 13.45"
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src34.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src34.csv
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src34_1.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src34.csv
[Sat Jun 15 20:10:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src34.csv
[Sat Jun 15 20:10:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:11:07 2013] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.984261 pixels away
[Sat Jun 15 20:11:07 2013] Source 5 is offset by -3.796498 and 1.925542 pixels which is larger than
2 X fitted extent = 1.491343 x 1.491343, not incorporating fit results
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:59 2013] XMMSAS src. selection expression = ellipse(20028.730652, 10136.388191, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5_src.reg
[Sun Jun 16 03:31:59 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (193, 80) - (268, 155)
[Sun Jun 16 03:31:59 2013] XMMSAS bgd. selection expression = annulus(20028.730652, 10136.388191, 1087.500000, 2175.000000, X, Y) && !ellipse(20635.658000, 11178.662200, 322.625609, 322.625609, 0.000000, X, Y) && !ellipse(18572.952000, 12609.826000, 559.832816, 559.832816, 0.000000, X, Y) && !ellipse(17532.762500, 13814.188000, 1649.504047, 979.464028, 304.911000, X, Y) && !ellipse(22794.904785, 10044.147163, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22721.498535, 10467.780319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21250.746384, 10913.316803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21053.874634, 11340.172501, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5.gif
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:03 2013] Mean detx,y = (-5169.76, -17056.44) 
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:03 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Jun 16 03:32:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 03:32:28 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Sun Jun 16 03:37:49 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:50 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 477.00
[Sun Jun 16 03:37:50 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 689.00
[Sun Jun 16 03:37:50 2013] Got source and background scale factors 580984.000000, 1647085.000000
[Sun Jun 16 03:37:50 2013] User source parameters:
  Position = (230.8, 117.1) = 5 36 43.29 -69 29 43.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 234.0 +/- 22.9
  Background aperture counts = 243.0
  Rate = 0.002 +/- 0.0002

[Sun Jun 16 03:37:50 2013] Updating counts from extracted products
[Sun Jun 16 03:37:50 2013] Set source signif. to 233.97/15.59 = 15.01
[Sun Jun 16 03:38:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:05 2013] Using photon index=1.80, rate=0.0023, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5.arf
[Sun Jun 16 03:38:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:05 2013] Updating source flux to 1.4e-13
[Sun Jun 16 03:38:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete