[Sat Jun 15 20:07:44 2013] Detection parameters:
  Position = (235.9, 293.6) = 5 36 38.51 -69 16 55.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.3 +/- 16.7
  Background counts = 94.7
  Rate = 0.0009 +/- 0.0002

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 4.55'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 8.70"
[Sat Jun 15 20:08:46 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 1.000
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 84 for pass 0, mean size = 8.70"
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src84.ximg exists
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src84_1.ximg exists
[Sat Jun 15 20:08:48 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src84 appears to have run properly
[Sat Jun 15 20:08:50 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src84.ximg exists
[Sat Jun 15 20:08:50 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src84_1.ximg exists
[Sat Jun 15 20:08:50 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src84 appears to have run properly
[Sat Jun 15 20:09:40 2013] Source 48 is offset by -2.084340 and 9.605357 pixels which is larger than
2 X fitted extent = 1.251241 x 1.251241, not incorporating fit results
[Sat Jun 15 20:09:40 2013] Spatial fit model total counts = 1169.760000, observed total counts = 1150.000000
[Sat Jun 15 20:09:40 2013] Offset between fit and detection position for source 48 = 2.802519 pixels
[Sat Jun 15 20:09:40 2013] 1154.445000 total counts/ 927.442000 bgd. counts: snr = 7.453980
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 2.802519 pixels
  Position = (238.2, 292.0) = 5 36 36.65 -69 17 3.7
  Extent = 17.4 (17.4-34.8)", rotation angle = 0
  Source counts = 227.0 +/- 34.0
  Background counts = 927.4
  Rate = 0.002 +/- 0.0003
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 17.40"
[Sat Jun 15 20:10:14 2013] source mask rpix=4.0, npix_max = 81, mask sum = 81, frac = 1.000
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 69 for pass 1, mean size = 17.40"
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src69.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src69.csv
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src69_1.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src69.csv
[Sat Jun 15 20:10:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src69.ximg exists
[Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src69.csv
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src69_1.ximg exists
[Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src69.csv
[Sat Jun 15 20:10:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src69_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:11:07 2013] Warning, spatial fit 69 centroid is now closest to src. 47
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:32:01 2013] XMMSAS src. selection expression = ellipse(20675.224000, 25354.025600, 1044.162030, 1044.162030, 0.000000, X, Y)
[Sun Jun 16 03:32:01 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48_src.reg
[Sun Jun 16 03:32:01 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (178, 232) - (298, 352)
[Sun Jun 16 03:32:01 2013] XMMSAS bgd. selection expression = annulus(20675.224000, 25354.025600, 1740.270050, 3480.540100, X, Y) && !ellipse(18487.075943, 29620.331970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19287.536743, 26063.102478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21149.358800, 26898.753200, 729.095221, 729.095221, 0.000000, X, Y) && !ellipse(19933.678800, 23669.182800, 1463.832042, 1463.832042, 0.000000, X, Y) && !ellipse(17889.760727, 23951.958588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18566.992000, 22948.680000, 1571.464045, 1571.464045, 0.000000, X, Y) && !ellipse(22362.182000, 26972.560000, 2356.336068, 2356.336068, 0.000000, X, Y) && !ellipse(17825.171829, 24556.248566, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 03:32:01 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48.gif
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:05 2013] Mean detx,y = (4644.55, -5647.03) 
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:05 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sun Jun 16 03:32:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48.rmf exists, delete to re-create
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48.arf exists, delete to re-create
[Sun Jun 16 03:38:01 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:38:01 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48_src_b10.pi.gz = 1904.00
[Sun Jun 16 03:38:01 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48_bgd.pi.gz = 4975.00
[Sun Jun 16 03:38:01 2013] Got source and background scale factors 3358967.000000, 10506577.000000
[Sun Jun 16 03:38:01 2013] User source parameters:
  Position = (238.2, 292.0) = 5 36 36.65 -69 17 3.7
  Extent = 17.4 (17.4-34.8)", rotation angle = 0
  Source aperture counts = 313.5 +/- 44.6
  Background aperture counts = 1590.5
  Rate = 0.003 +/- 0.0004

[Sun Jun 16 03:38:07 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:07 2013] Using photon index=1.80, rate=0.00224, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48.arf
[Sun Jun 16 03:38:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:08 2013] Updating source flux to 3.7e-14
[Sun Jun 16 03:38:53 2013] Flag b found in src. 48 procflags, skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src48_pl.csv not found, spectral fit skipped or did not complete