[Sat Jun 15 20:07:44 2013] Detection parameters:
  Position = (222.3, 300.1) = 5 36 49.69 -69 16 26.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 231.9 +/- 21.6
  Background counts = 86.9
  Rate = 0.004 +/- 0.0003

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 5.52'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 9.19"
[Sat Jun 15 20:08:46 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.915
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 9.19"
[Sat Jun 15 20:08:46 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jun 15 20:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src11.csv
[Sat Jun 15 20:08:46 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jun 15 20:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src11.csv
[Sat Jun 15 20:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 15 20:08:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:40 2013] Spatial fit model total counts = 1261.390000, observed total counts = 972.000000
[Sat Jun 15 20:09:40 2013] Poor agreement between spatial fit and data for source 47
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:14 2013] Using EEF radius (= 9.19 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 9.19"
[Sat Jun 15 20:10:14 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.915
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 9.19"
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src11.csv
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src11.csv
[Sat Jun 15 20:10:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 15 20:10:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:11:07 2013] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 47 at 12.751378 pixels away
[Sat Jun 15 20:11:07 2013] Warning: source 69 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 47 at 29.014513 pixels away
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:59 2013] XMMSAS src. selection expression = ellipse(19287.536743, 26063.102478, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47_src.reg
[Sun Jun 16 03:31:59 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (185, 263) - (260, 338)
[Sun Jun 16 03:31:59 2013] XMMSAS bgd. selection expression = annulus(19287.536743, 26063.102478, 1087.500000, 2175.000000, X, Y) && !ellipse(21149.358800, 26898.753200, 729.095221, 729.095221, 0.000000, X, Y) && !ellipse(19933.678800, 23669.182800, 1463.832042, 1463.832042, 0.000000, X, Y) && !ellipse(17889.760727, 23951.958588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18566.992000, 22948.680000, 1571.464045, 1571.464045, 0.000000, X, Y) && !ellipse(22362.182000, 26972.560000, 2356.336068, 2356.336068, 0.000000, X, Y) && !ellipse(17825.171829, 24556.248566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20675.224000, 25354.025600, 1392.216040, 1392.216040, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47.gif
[Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:03 2013] Mean detx,y = (6037.12, -6028.44) 
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:03 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sun Jun 16 03:32:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 03:32:28 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47.arf exists, delete to re-create
[Sun Jun 16 03:37:42 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:42 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47_src_b10.pi.gz = 779.00
[Sun Jun 16 03:37:42 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47_bgd.pi.gz = 1830.00
[Sun Jun 16 03:37:43 2013] Got source and background scale factors 1102374.000000, 4152789.000000
[Sun Jun 16 03:37:43 2013] User source parameters:
  Position = (222.3, 300.1) = 5 36 49.69 -69 16 26.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 293.2 +/- 28.9
  Background aperture counts = 485.8
  Rate = 0.003 +/- 0.0003

[Sun Jun 16 03:37:43 2013] Updating counts from extracted products
[Sun Jun 16 03:37:43 2013] Set source signif. to 293.22/22.04 = 13.30
[Sun Jun 16 03:38:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:03 2013] Using photon index=1.80, rate=0.00289, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47.arf
[Sun Jun 16 03:38:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:03 2013] Updating source flux to 5.8e-14
[Sun Jun 16 03:38:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete