[Sat Jun 15 20:07:44 2013] Detection parameters:
  Position = (334.2, 301.5) = 5 35 17.98 -69 16 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 253.2 +/- 30.2
  Background counts = 121.5
  Rate = 0.003 +/- 0.0003

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 2.60'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 7.73"
[Sat Jun 15 20:08:46 2013] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.916
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 20 for pass 0, mean size = 7.73"
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src20.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src20.csv
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src20.csv
[Sat Jun 15 20:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Jun 15 20:08:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Jun 15 20:08:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sat Jun 15 20:08:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:40 2013] Source 46 is offset by 7.283838 and -3.127203 pixels which is larger than
2 X fitted extent = 5.086759 x 5.086759, not incorporating fit results
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:14 2013] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 7.73"
[Sat Jun 15 20:10:14 2013] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.916
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 7.73"
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src20.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src20.csv
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src20.csv
[Sat Jun 15 20:10:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Sat Jun 15 20:10:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:11:07 2013] Spatial fit model total counts = 10114.700000, observed total counts = 6956.000000
[Sat Jun 15 20:11:07 2013] Poor agreement between spatial fit and data for source 46
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:59 2013] XMMSAS src. selection expression = ellipse(29024.877930, 26183.221313, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46_src.reg
[Sun Jun 16 03:31:59 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (297, 264) - (372, 339)
[Sun Jun 16 03:31:59 2013] XMMSAS bgd. selection expression = annulus(29024.877930, 26183.221313, 1087.500000, 2175.000000, X, Y) && !ellipse(27979.186820, 26398.281190, 1299.067237, 1299.067237, 0.000000, X, Y) && !ellipse(28596.000427, 25671.591858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26409.542000, 24840.438000, 1072.152031, 1072.152031, 0.000000, X, Y) && !ellipse(26331.119720, 23472.571808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27752.348938, 24972.472198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26965.002655, 27701.574158, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46.gif
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:03 2013] Mean detx,y = (-730.98, 581.91) 
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:03 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sun Jun 16 03:32:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 03:32:28 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46.arf exists, delete to re-create
[Sun Jun 16 03:37:45 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:45 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46_src_b10.pi.gz = 3643.00
[Sun Jun 16 03:37:45 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46_bgd.pi.gz = 4143.00
[Sun Jun 16 03:37:45 2013] Got source and background scale factors 1170432.000000, 6091448.000000
[Sun Jun 16 03:37:45 2013] User source parameters:
  Position = (334.2, 301.5) = 5 35 17.98 -69 16 18.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2846.9 +/- 61.4
  Background aperture counts = 796.1
  Rate = 0.03 +/- 0.0006

[Sun Jun 16 03:37:45 2013] Updating counts from extracted products
[Sun Jun 16 03:37:45 2013] Set source signif. to 2846.95/28.21 = 100.90
[Sun Jun 16 03:38:04 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:04 2013] Using photon index=1.80, rate=0.028, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46.arf
[Sun Jun 16 03:38:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:04 2013] Updating source flux to 3.5e-13
[Sun Jun 16 03:38:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src46_pl.csv not found, spectral fit skipped or did not complete