[Sat Jun 15 20:07:44 2013] Detection parameters:
  Position = (358.7, 345.5) = 5 34 58.03 -69 13 9.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.4 +/- 15.9
  Background counts = 85.1
  Rate = 0.001 +/- 0.0002

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 5.54'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Sat Jun 15 20:08:46 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.914
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 74 for pass 0, mean size = 9.20"
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src74.ximg exists
[Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src74.csv
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src74_1.ximg exists
[Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src74.csv
[Sat Jun 15 20:08:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:50 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src74.ximg exists
[Sat Jun 15 20:08:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src74.csv
[Sat Jun 15 20:08:50 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src74_1.ximg exists
[Sat Jun 15 20:08:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src74.csv
[Sat Jun 15 20:08:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:40 2013] Source 40 is offset by 7.772542 and -6.027091 pixels which is larger than
2 X fitted extent = 1.210514 x 1.210514, not incorporating fit results
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:14 2013] Using EEF radius (= 9.20 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 9.20"
[Sat Jun 15 20:10:14 2013] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.914
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 9.20"
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src59.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src59.csv
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src59_1.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src59.csv
[Sat Jun 15 20:10:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src59.csv
[Sat Jun 15 20:10:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:11:07 2013] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 11.858481 pixels away
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:32:00 2013] XMMSAS src. selection expression = ellipse(31156.553162, 30010.961121, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:32:00 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40_src.reg
[Sun Jun 16 03:32:00 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (321, 308) - (396, 383)
[Sun Jun 16 03:32:00 2013] XMMSAS bgd. selection expression = annulus(31156.553162, 30010.961121, 1087.500000, 2175.000000, X, Y) && !ellipse(27782.590000, 31852.788000, 1469.216042, 1469.216042, 0.000000, X, Y)
[Sun Jun 16 03:32:00 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40.gif
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:05 2013] Mean detx,y = (152.26, 4923.51) 
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:05 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sun Jun 16 03:32:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] Not generating rmf since there are only 81 counts
[Sun Jun 16 03:32:28 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40.arf exists, delete to re-create
[Sun Jun 16 03:37:57 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:57 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40_src_b10.pi.gz = 591.00
[Sun Jun 16 03:37:57 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40_bgd.pi.gz = 4507.00
[Sun Jun 16 03:37:57 2013] Got source and background scale factors 1200884.000000, 9643159.000000
[Sun Jun 16 03:37:58 2013] User source parameters:
  Position = (358.7, 345.5) = 5 34 58.03 -69 13 9.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 29.7 +/- 25.3
  Background aperture counts = 561.3
  Rate = 0.0003 +/- 0.0002

[Sun Jun 16 03:37:58 2013] Updating counts from extracted products
[Sun Jun 16 03:37:58 2013] Set source signif. to 29.73/23.69 = 1.26
[Sun Jun 16 03:38:07 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:07 2013] Using photon index=1.80, rate=0.000293, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40.arf
[Sun Jun 16 03:38:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:07 2013] Updating source flux to 4.9e-15
[Sun Jun 16 03:38:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src40_pl.csv not found, spectral fit skipped or did not complete