[Sat Jun 15 20:07:44 2013] Detection parameters: Position = (258.9, 352.2) = 5 36 19.56 -69 12 47.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 101.7 +/- 16.9 Background counts = 123.9 Rate = 0.001 +/- 0.0002 [Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 4.84' [Sat Jun 15 20:08:46 2013] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 8.85" [Sat Jun 15 20:08:46 2013] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.740 [Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 79 for pass 0, mean size = 8.85" [Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src79.ximg exists [Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src79.csv [Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src79_1.ximg exists [Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src79.csv [Sat Jun 15 20:08:48 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src79_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:08:50 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src79.ximg exists [Sat Jun 15 20:08:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src79.csv [Sat Jun 15 20:08:50 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists [Sat Jun 15 20:08:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src79.csv [Sat Jun 15 20:08:50 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:09:40 2013] Source 35 is offset by -2.291643 and -8.216369 pixels which is larger than 2 X fitted extent = 0.951766 x 0.951766, not incorporating fit results [Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:09:40 2013] Assessing source extent using major [Sat Jun 15 20:09:40 2013] Source does appear to be extended [Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:09:40 2013] Source is confused with source 6 [Sat Jun 15 20:10:14 2013] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 8.85" [Sat Jun 15 20:10:14 2013] source mask rpix=2.0, npix_max = 25, mask sum = 19, frac = 0.740 [Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 64 for pass 1, mean size = 8.85" [Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src64.ximg exists [Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src64.csv [Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src64_1.ximg exists [Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src64.csv [Sat Jun 15 20:10:16 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src64_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src64.ximg exists [Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src64.csv [Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists [Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src64.csv [Sat Jun 15 20:10:17 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src64_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:11:07 2013] Source 35 is offset by 4.455267 and 1.663355 pixels which is larger than 2 X fitted extent = 2.182529 x 2.182529, not incorporating fit results [Sat Jun 15 20:11:07 2013] Warning, spatial fit 64 centroid is now closest to src. 6 [Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:11:07 2013] Assessing source extent using major [Sat Jun 15 20:11:07 2013] Source does appear to be extended [Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 16 03:32:01 2013] XMMSAS src. selection expression = ellipse(22477.148224, 30593.171875, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 16 03:32:01 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35_src.reg [Sun Jun 16 03:32:01 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (221, 315) - (296, 390) [Sun Jun 16 03:32:01 2013] XMMSAS bgd. selection expression = annulus(22477.148224, 30593.171875, 1087.500000, 2175.000000, X, Y) && !ellipse(25426.952000, 34578.798000, 2516.248072, 1439.000041, 0.000000, X, Y) && !ellipse(22892.564728, 30111.122101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21047.248400, 31844.293200, 349.848010, 349.848010, 0.000000, X, Y) && !ellipse(20601.650400, 31944.020000, 1519.040044, 1519.040044, 0.000000, X, Y) && !ellipse(20490.295600, 32515.450000, 1041.536030, 1041.536030, 0.000000, X, Y) && !ellipse(20612.858000, 32654.220000, 1611.856046, 1611.856046, 0.000000, X, Y) && !ellipse(20707.945557, 31112.330994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21840.785000, 30442.238000, 840.504024, 840.504024, 0.000000, X, Y) && !ellipse(22362.182000, 26972.560000, 2356.336068, 2356.336068, 0.000000, X, Y) [Sun Jun 16 03:32:01 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35.gif [Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35_bgd.evt exist, delete to re-create [Sun Jun 16 03:32:05 2013] Mean detx,y = (6865.09, -599.62) [Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35_bgd.img exist, delete to re-create [Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35_bgd.pi exist, delete to re-create [Sun Jun 16 03:32:05 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35_src_b10.pi.gz [Sun Jun 16 03:32:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35_bgd.pi.gz [Sun Jun 16 03:32:05 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35_bgd.lc exist, delete to re-create [Sun Jun 16 03:32:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 16 03:32:28 2013] rmf not generated due to insufficient counts [Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35.arf exists, delete to re-create [Sun Jun 16 03:37:59 2013] Updating aperture counts using extracted products [Sun Jun 16 03:37:59 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35_src_b10.pi.gz = 1158.00 [Sun Jun 16 03:37:59 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35_bgd.pi.gz = 3281.00 [Sun Jun 16 03:37:59 2013] Got source and background scale factors 1043668.000000, 5244234.000000 [Sun Jun 16 03:37:59 2013] User source parameters: Position = (258.9, 352.2) = 5 36 19.56 -69 12 47.8 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 505.0 +/- 35.0 Background aperture counts = 653.0 Rate = 0.005 +/- 0.0003 [Sun Jun 16 03:37:59 2013] Updating counts from extracted products [Sun Jun 16 03:37:59 2013] Set source signif. to 505.04/25.55 = 19.76 [Sun Jun 16 03:38:07 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 03:38:07 2013] Using photon index=1.80, rate=0.00497, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35.arf [Sun Jun 16 03:38:07 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 03:38:07 2013] Updating source flux to 1.2e-13 [Sun Jun 16 03:38:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src35_pl.csv not found, spectral fit skipped or did not complete