[Sat Jun 15 20:07:43 2013] Detection parameters: Position = (234.6, 370.0) = 5 36 39.35 -69 11 20.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 153.5 +/- 21.9 Background counts = 96.8 Rate = 0.003 +/- 0.0004 [Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 6.95' [Sat Jun 15 20:08:46 2013] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 9.90" [Sat Jun 15 20:08:46 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.973 [Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 9.90" [Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src21.ximg exists [Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src21.csv [Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src21_1.ximg exists [Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src21.csv [Sat Jun 15 20:08:47 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src21_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists [Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists [Sat Jun 15 20:08:49 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly [Sat Jun 15 20:09:40 2013] Warning, spatial fit 21 centroid is now closest to src. 27 [Sat Jun 15 20:09:40 2013] Spatial fit model total counts = 1518.230000, observed total counts = 1500.000000 [Sat Jun 15 20:09:40 2013] Offset between fit and detection position for source 32 = 3.541130 pixels [Sat Jun 15 20:09:40 2013] Warning, changing simple spatial fit ID from 21 to 42 [Sat Jun 15 20:09:40 2013] 1512.213000 total counts/ 1326.530000 bgd. counts: snr = 5.098162 Spatial fit parameters: Offset between fit and detection position for source 32 = 3.541130 pixels Position = (237.4, 367.7) = 5 36 37.13 -69 11 34.2 Extent = 19.0 (18.9-38.0)", rotation angle = 0 Source counts = 185.7 +/- 38.9 Background counts = 1326.5 Rate = 0.002 +/- 0.0004 [Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:09:40 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:09:40 2013] Source does appear to be extended [Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:09:40 2013] Source is confused with source 31 [Sat Jun 15 20:10:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 15 20:10:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 18.99" [Sat Jun 15 20:10:14 2013] source mask rpix=4.4, npix_max = 94, mask sum = 100, frac = 1.056 [Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 18.99" [Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src21.ximg exists [Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src21.csv [Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src21_1.ximg exists [Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src21.csv [Sat Jun 15 20:10:15 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src21_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists [Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists [Sat Jun 15 20:10:16 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly [Sat Jun 15 20:11:07 2013] Warning, spatial fit 21 centroid is now closest to src. 35 [Sat Jun 15 20:11:07 2013] Source 32 is offset by -3.510591 and 1.719003 pixels which is larger than 2 X fitted extent = 8.730115 x 1.277609, not incorporating fit results [Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:11:07 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:11:07 2013] Source does appear to be extended [Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 16 03:31:59 2013] XMMSAS src. selection expression = ellipse(20601.650400, 31944.020000, 1139.280033, 1139.280033, 0.000000, X, Y) [Sun Jun 16 03:31:59 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32_src.reg [Sun Jun 16 03:31:59 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (172, 302) - (303, 433) [Sun Jun 16 03:31:59 2013] XMMSAS bgd. selection expression = annulus(20601.650400, 31944.020000, 1898.800055, 3797.600109, X, Y) && !ellipse(18487.075943, 29620.331970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25426.952000, 34578.798000, 2516.248072, 1439.000041, 0.000000, X, Y) && !ellipse(22749.568000, 34354.042000, 833.560024, 833.560024, 0.000000, X, Y) && !ellipse(22892.564728, 30111.122101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23410.932200, 34393.360800, 579.949617, 579.949617, 0.000000, X, Y) && !ellipse(21047.248400, 31844.293200, 349.848010, 349.848010, 0.000000, X, Y) && !ellipse(24382.560000, 34947.297600, 1620.440047, 895.808026, 212.702000, X, Y) && !ellipse(20490.295600, 32515.450000, 1041.536030, 1041.536030, 0.000000, X, Y) && !ellipse(16551.596756, 29867.385101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20612.858000, 32654.220000, 1611.856046, 1611.856046, 0.000000, X, Y) && !ellipse(20707.945557, 31112.330994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23376.146454, 35116.678040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21840.785000, 30442.238000, 840.504024, 840.504024, 0.000000, X, Y) && !ellipse(15947.081100, 27541.964417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22362.182000, 26972.560000, 2356.336068, 2356.336068, 0.000000, X, Y) && !ellipse(22477.148224, 30593.171875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14807.596000, 36020.838000, 2025.224058, 2025.224058, 0.000000, X, Y) [Sun Jun 16 03:31:59 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32.gif [Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32_bgd.evt exist, delete to re-create [Sun Jun 16 03:32:03 2013] Mean detx,y = (9178.78, -795.45) [Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32_bgd.img exist, delete to re-create [Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32_bgd.pi exist, delete to re-create [Sun Jun 16 03:32:03 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32_src_b10.pi.gz [Sun Jun 16 03:32:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32_bgd.pi.gz [Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32_bgd.lc exist, delete to re-create [Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32.rmf exists, delete to re-create [Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32.arf exists, delete to re-create [Sun Jun 16 03:37:45 2013] Updating aperture counts using extracted products [Sun Jun 16 03:37:46 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 3222.00 [Sun Jun 16 03:37:46 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32_bgd.pi.gz = 9935.00 [Sun Jun 16 03:37:46 2013] Got source and background scale factors 3947464.000000, 21957781.000000 [Sun Jun 16 03:37:46 2013] User source parameters: Position = (237.4, 367.7) = 5 36 37.13 -69 11 34.2 Extent = 19.0 (18.9-38.0)", rotation angle = 0 Source aperture counts = 1435.9 +/- 57.8 Background aperture counts = 1786.1 Rate = 0.01 +/- 0.0006 [Sun Jun 16 03:38:04 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 03:38:04 2013] Using photon index=1.80, rate=0.00183, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32.arf [Sun Jun 16 03:38:04 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 03:38:04 2013] Updating source flux to 3.8e-14 [Sun Jun 16 03:38:53 2013] Flag b found in src. 32 procflags, skipping spectral fitting [Sun Jun 16 03:38:53 2013] Flag c found in src. 32 procflags, skipping spectral fitting [Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete