[Sat Jun 15 20:07:43 2013] Detection parameters: Position = (318.0, 371.9) = 5 35 31.30 -69 11 16.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 156.3 +/- 21.6 Background counts = 95.6 Rate = 0.002 +/- 0.0003 [Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 5.51' [Sat Jun 15 20:08:46 2013] Using EEF radius (= 9.18 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 9.18" [Sat Jun 15 20:08:46 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.100 [Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 38 for pass 0, mean size = 9.18" [Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src38.ximg exists [Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src38.csv [Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src38_1.ximg exists [Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src38.csv [Sat Jun 15 20:08:47 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src38_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists [Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists [Sat Jun 15 20:08:49 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly [Sat Jun 15 20:09:40 2013] Warning, spatial fit 38 centroid is now closest to src. 30 [Sat Jun 15 20:09:40 2013] Spatial fit model total counts = 1513.990000, observed total counts = 1512.000000 [Sat Jun 15 20:09:40 2013] Offset between fit and detection position for source 29 = 1.524905 pixels [Sat Jun 15 20:09:40 2013] Warning, changing simple spatial fit ID from 38 to 41 [Sat Jun 15 20:09:40 2013] 1370.573000 total counts/ 1036.430000 bgd. counts: snr = 10.379164 Spatial fit parameters: Offset between fit and detection position for source 29 = 1.524905 pixels Position = (317.8, 370.3) = 5 35 31.47 -69 11 23.3 Extent = 14.9 (12.2-18.1)", rotation angle = 0 Source counts = 334.1 +/- 37.0 Background counts = 1036.4 Rate = 0.003 +/- 0.0004 [Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:09:40 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:09:40 2013] Source does appear to be extended [Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:09:40 2013] Source is confused with source 30 [Sat Jun 15 20:10:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 14.87" [Sat Jun 15 20:10:14 2013] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.042 [Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 14.87" [Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src36.ximg exists [Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src36.csv [Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src36_1.ximg exists [Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src36.csv [Sat Jun 15 20:10:15 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src36_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src36.ximg exists [Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists [Sat Jun 15 20:10:17 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src36 appears to have run properly [Sat Jun 15 20:11:07 2013] Warning, spatial fit 36 centroid is now closest to src. 37 [Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:11:07 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:11:07 2013] Source does appear to be extended [Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 16 03:31:59 2013] XMMSAS src. selection expression = ellipse(27599.060000, 32171.018000, 892.458026, 892.458026, 0.000000, X, Y) [Sun Jun 16 03:32:00 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29_src.reg [Sun Jun 16 03:32:00 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (266, 319) - (369, 422) [Sun Jun 16 03:32:00 2013] XMMSAS bgd. selection expression = annulus(27599.060000, 32171.018000, 1487.430043, 2974.860086, X, Y) && !ellipse(25426.952000, 34578.798000, 2516.248072, 1439.000041, 0.000000, X, Y) && !ellipse(26348.150000, 33546.400000, 1501.496043, 1501.496043, 0.000000, X, Y) && !ellipse(26415.266260, 31586.360200, 274.824008, 274.824008, 0.000000, X, Y) && !ellipse(24382.560000, 34947.297600, 1620.440047, 895.808026, 212.702000, X, Y) && !ellipse(27090.864319, 32911.365570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26962.182200, 29853.054600, 1195.272034, 1195.272034, 0.000000, X, Y) && !ellipse(27782.590000, 31852.788000, 1469.216042, 1469.216042, 0.000000, X, Y) && !ellipse(26965.002655, 27701.574158, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26727.244781, 30667.239227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31156.553162, 30010.961121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22362.182000, 26972.560000, 2356.336068, 2356.336068, 0.000000, X, Y) [Sun Jun 16 03:32:00 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29.gif [Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create [Sun Jun 16 03:32:04 2013] Mean detx,y = (4283.20, 4034.92) [Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create [Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create [Sun Jun 16 03:32:04 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29_src_b10.pi.gz [Sun Jun 16 03:32:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29_bgd.pi.gz [Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create [Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29.rmf exists, delete to re-create [Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29.arf exists, delete to re-create [Sun Jun 16 03:37:50 2013] Updating aperture counts using extracted products [Sun Jun 16 03:37:50 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 2135.00 [Sun Jun 16 03:37:51 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29_bgd.pi.gz = 4662.00 [Sun Jun 16 03:37:51 2013] Got source and background scale factors 2499980.000000, 10422411.000000 [Sun Jun 16 03:37:51 2013] User source parameters: Position = (317.8, 370.3) = 5 35 31.47 -69 11 23.3 Extent = 14.9 (12.2-18.1)", rotation angle = 0 Source aperture counts = 1016.7 +/- 47.2 Background aperture counts = 1118.3 Rate = 0.01 +/- 0.0005 [Sun Jun 16 03:38:05 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 03:38:05 2013] Using photon index=1.80, rate=0.00329, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29.arf [Sun Jun 16 03:38:05 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 03:38:05 2013] Updating source flux to 5.5e-14 [Sun Jun 16 03:38:53 2013] Flag c found in src. 29 procflags, skipping spectral fitting [Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete