[Sat Jun 15 20:07:43 2013] Detection parameters: Position = (240.9, 380.9) = 5 36 34.19 -69 10 33.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 114.6 +/- 20.0 Background counts = 102.4 Rate = 0.002 +/- 0.0004 [Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 7.29' [Sat Jun 15 20:08:46 2013] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 10.07" [Sat Jun 15 20:08:46 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.135 [Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 10.07" [Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src36.ximg exists [Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src36_1.ximg exists [Sat Jun 15 20:08:47 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src36 appears to have run properly [Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src36.ximg exists [Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists [Sat Jun 15 20:08:49 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly [Sat Jun 15 20:09:40 2013] Source 26 is offset by -5.791766 and -5.776843 pixels which is larger than 2 X fitted extent = 1.212933 x 1.212933, not incorporating fit results [Sat Jun 15 20:09:40 2013] Spatial fit model total counts = 1542.230000, observed total counts = 1546.000000 [Sat Jun 15 20:09:40 2013] Offset between fit and detection position for source 26 = 6.087950 pixels [Sat Jun 15 20:09:40 2013] 1582.402000 total counts/ 978.558000 bgd. counts: snr = 19.303296 Spatial fit parameters: Offset between fit and detection position for source 26 = 6.087950 pixels Position = (237.5, 375.9) = 5 36 37.01 -69 10 58.7 Extent = 20.1 (20.1-40.3)", rotation angle = 0 Source counts = 603.8 +/- 39.8 Background counts = 978.6 Rate = 0.006 +/- 0.0004 [Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:09:40 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:09:40 2013] Source does appear to be extended [Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:09:40 2013] Source is confused with source 31 [Sat Jun 15 20:10:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 15 20:10:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 20.15" [Sat Jun 15 20:10:14 2013] source mask rpix=4.6, npix_max = 105, mask sum = 110, frac = 1.044 [Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 20.15" [Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src35.ximg exists [Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src35.csv [Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src35_1.ximg exists [Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src35.csv [Sat Jun 15 20:10:15 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src35_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists [Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists [Sat Jun 15 20:10:17 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly [Sat Jun 15 20:11:07 2013] Warning, spatial fit 35 centroid is now closest to src. 23 [Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:11:07 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:11:07 2013] Source does appear to be extended [Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 16 03:31:59 2013] XMMSAS src. selection expression = ellipse(20612.858000, 32654.220000, 1208.892035, 1208.892035, 0.000000, X, Y) [Sun Jun 16 03:31:59 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26_src.reg [Sun Jun 16 03:31:59 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (168, 306) - (307, 445) [Sun Jun 16 03:31:59 2013] XMMSAS bgd. selection expression = annulus(20612.858000, 32654.220000, 2014.820058, 4029.640116, X, Y) && !ellipse(18487.075943, 29620.331970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25426.952000, 34578.798000, 2516.248072, 1439.000041, 0.000000, X, Y) && !ellipse(22749.568000, 34354.042000, 833.560024, 833.560024, 0.000000, X, Y) && !ellipse(22892.564728, 30111.122101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23410.932200, 34393.360800, 579.949617, 579.949617, 0.000000, X, Y) && !ellipse(21047.248400, 31844.293200, 349.848010, 349.848010, 0.000000, X, Y) && !ellipse(24382.560000, 34947.297600, 1620.440047, 895.808026, 212.702000, X, Y) && !ellipse(20601.650400, 31944.020000, 1519.040044, 1519.040044, 0.000000, X, Y) && !ellipse(20490.295600, 32515.450000, 1041.536030, 1041.536030, 0.000000, X, Y) && !ellipse(16551.596756, 29867.385101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20707.945557, 31112.330994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23376.146454, 35116.678040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21840.785000, 30442.238000, 840.504024, 840.504024, 0.000000, X, Y) && !ellipse(22362.182000, 26972.560000, 2356.336068, 2356.336068, 0.000000, X, Y) && !ellipse(22477.148224, 30593.171875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14807.596000, 36020.838000, 2025.224058, 2025.224058, 0.000000, X, Y) [Sun Jun 16 03:31:59 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26.gif [Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create [Sun Jun 16 03:32:04 2013] Mean detx,y = (9558.80, -340.66) [Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create [Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create [Sun Jun 16 03:32:04 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26_src_b10.pi.gz [Sun Jun 16 03:32:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26_bgd.pi.gz [Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create [Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26.rmf exists, delete to re-create [Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26.arf exists, delete to re-create [Sun Jun 16 03:37:50 2013] Updating aperture counts using extracted products [Sun Jun 16 03:37:50 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 3475.00 [Sun Jun 16 03:37:50 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26_bgd.pi.gz = 11212.00 [Sun Jun 16 03:37:50 2013] Got source and background scale factors 4593560.000000, 26242333.000000 [Sun Jun 16 03:37:50 2013] User source parameters: Position = (237.5, 375.9) = 5 36 37.01 -69 10 58.7 Extent = 20.1 (20.1-40.3)", rotation angle = 0 Source aperture counts = 1512.4 +/- 60.0 Background aperture counts = 1962.6 Rate = 0.01 +/- 0.0006 [Sun Jun 16 03:38:05 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 03:38:05 2013] Using photon index=1.80, rate=0.00595, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26.arf [Sun Jun 16 03:38:05 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 03:38:05 2013] Updating source flux to 1.2e-13 [Sun Jun 16 03:38:53 2013] Flag b found in src. 26 procflags, skipping spectral fitting [Sun Jun 16 03:38:53 2013] Flag c found in src. 26 procflags, skipping spectral fitting [Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete