[Sat Jun 15 20:07:43 2013] Detection parameters:
  Position = (269.2, 404.2) = 5 36 11.05 -69 9 1.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.7 +/- 23.0
  Background counts = 96.7
  Rate = 0.002 +/- 0.0002

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 7.95'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 10.41"
[Sat Jun 15 20:08:46 2013] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.867
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 10.41"
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src43.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src43.csv
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src43_1.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src43.csv
[Sat Jun 15 20:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sat Jun 15 20:08:49 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Sat Jun 15 20:09:40 2013] Warning, spatial fit 43 centroid is now closest to src. 4
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:40 2013] Source is confused with source 25
[Sat Jun 15 20:10:14 2013] Using EEF radius (= 10.41 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 10.41"
[Sat Jun 15 20:10:14 2013] source mask rpix=2.4, npix_max = 33, mask sum = 29, frac = 0.867
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 10.41"
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src41.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src41.csv
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src41_1.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src41.csv
[Sat Jun 15 20:10:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Sat Jun 15 20:10:17 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Sat Jun 15 20:11:07 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 16.804966 pixels away
[Sat Jun 15 20:11:07 2013] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 17.165810 pixels away
[Sat Jun 15 20:11:07 2013] Warning, spatial fit 41 centroid is now closest to src. 4
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:32:00 2013] XMMSAS src. selection expression = ellipse(23376.146454, 35116.678040, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:32:00 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23_src.reg
[Sun Jun 16 03:32:00 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (232, 367) - (307, 442)
[Sun Jun 16 03:32:00 2013] XMMSAS bgd. selection expression = annulus(23376.146454, 35116.678040, 1087.500000, 2175.000000, X, Y) && !ellipse(25426.952000, 34578.798000, 2516.248072, 1439.000041, 0.000000, X, Y) && !ellipse(22749.568000, 34354.042000, 833.560024, 833.560024, 0.000000, X, Y) && !ellipse(23410.932200, 34393.360800, 579.949617, 579.949617, 0.000000, X, Y) && !ellipse(26348.150000, 33546.400000, 1501.496043, 1501.496043, 0.000000, X, Y) && !ellipse(24382.560000, 34947.297600, 1620.440047, 895.808026, 212.702000, X, Y) && !ellipse(20601.650400, 31944.020000, 1519.040044, 1519.040044, 0.000000, X, Y) && !ellipse(20490.295600, 32515.450000, 1041.536030, 1041.536030, 0.000000, X, Y) && !ellipse(20612.858000, 32654.220000, 1611.856046, 1611.856046, 0.000000, X, Y)
[Sun Jun 16 03:32:00 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23.gif
[Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:04 2013] Mean detx,y = (9270.45, 3282.06) 
[Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:04 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sun Jun 16 03:32:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 03:32:28 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23.arf exists, delete to re-create
[Sun Jun 16 03:37:52 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:52 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 1016.00
[Sun Jun 16 03:37:52 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23_bgd.pi.gz = 2984.00
[Sun Jun 16 03:37:52 2013] Got source and background scale factors 1273524.000000, 6339140.000000
[Sun Jun 16 03:37:52 2013] User source parameters:
  Position = (269.2, 404.2) = 5 36 11.05 -69 9 1.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 416.5 +/- 32.9
  Background aperture counts = 599.5
  Rate = 0.004 +/- 0.0003

[Sun Jun 16 03:37:52 2013] Updating counts from extracted products
[Sun Jun 16 03:37:52 2013] Set source signif. to 416.52/24.48 = 17.01
[Sun Jun 16 03:38:05 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:05 2013] Using photon index=1.80, rate=0.0041, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23.arf
[Sun Jun 16 03:38:05 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:05 2013] Updating source flux to 1e-13
[Sun Jun 16 03:38:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete