[Sat Jun 15 20:07:43 2013] Detection parameters: Position = (304.8, 384.9) = 5 35 42.09 -69 10 16.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 239.4 +/- 22.6 Background counts = 104.7 Rate = 0.004 +/- 0.0004 [Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 6.28' [Sat Jun 15 20:08:46 2013] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 9.57" [Sat Jun 15 20:08:46 2013] source mask rpix=2.2, npix_max = 29, mask sum = 24, frac = 0.823 [Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 9.57" [Sat Jun 15 20:08:46 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src10.ximg exists [Sat Jun 15 20:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src10.csv [Sat Jun 15 20:08:46 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src10_1.ximg exists [Sat Jun 15 20:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src10.csv [Sat Jun 15 20:08:46 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src10_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists [Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src10.csv [Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists [Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src10.csv [Sat Jun 15 20:08:48 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:09:40 2013] Warning, spatial fit 10 centroid is now closest to src. 13 [Sat Jun 15 20:09:40 2013] Spatial fit model total counts = 1943.660000, observed total counts = 1942.000000 [Sat Jun 15 20:09:40 2013] Offset between fit and detection position for source 21 = 2.183721 pixels [Sat Jun 15 20:09:40 2013] Warning, changing simple spatial fit ID from 10 to 15 [Sat Jun 15 20:09:40 2013] 1912.557000 total counts/ 1659.530000 bgd. counts: snr = 6.211183 Spatial fit parameters: Offset between fit and detection position for source 21 = 2.183721 pixels Position = (303.4, 386.5) = 5 35 43.25 -69 10 12.9 Extent = 18.8 (17.3-37.5)", rotation angle = 0 Source counts = 253.0 +/- 43.7 Background counts = 1659.5 Rate = 0.002 +/- 0.0004 [Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:09:40 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:09:40 2013] Source does appear to be extended [Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:09:40 2013] Source is confused with source 13 [Sat Jun 15 20:10:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 15 20:10:14 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 18.77" [Sat Jun 15 20:10:14 2013] source mask rpix=4.3, npix_max = 92, mask sum = 50, frac = 0.539 [Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 18.77" [Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src10.ximg exists [Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src10.csv [Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src10_1.ximg exists [Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src10.csv [Sat Jun 15 20:10:15 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src10_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists [Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src10.csv [Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists [Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src10.csv [Sat Jun 15 20:10:16 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:11:07 2013] Warning, spatial fit 10 centroid is now closest to src. 28 [Sat Jun 15 20:11:07 2013] Spatial fit model total counts = 1946.320000, observed total counts = 1942.000000 [Sat Jun 15 20:11:07 2013] Offset between fit and detection position for source 21 = 0.393005 pixels [Sat Jun 15 20:11:07 2013] Warning, changing simple spatial fit ID from 10 to 15 [Sat Jun 15 20:11:07 2013] 1916.007000 total counts/ 1642.160000 bgd. counts: snr = 6.757721 Spatial fit parameters: Offset between fit and detection position for source 21 = 0.393005 pixels Position = (303.4, 386.1) = 5 35 43.21 -69 10 14.6 Extent = 18.8 (18.7-37.5)", rotation angle = 0 Source counts = 273.8 +/- 43.8 Background counts = 1642.2 Rate = 0.003 +/- 0.0004 [Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:11:07 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:11:07 2013] Source does appear to be extended [Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 16 03:31:59 2013] XMMSAS src. selection expression = ellipse(26348.150000, 33546.400000, 1126.122032, 1126.122032, 0.000000, X, Y) [Sun Jun 16 03:31:59 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21_src.reg [Sun Jun 16 03:31:59 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (239, 321) - (368, 451) [Sun Jun 16 03:31:59 2013] XMMSAS bgd. selection expression = annulus(26348.150000, 33546.400000, 1876.870054, 3753.740108, X, Y) && !ellipse(25426.952000, 34578.798000, 2516.248072, 1439.000041, 0.000000, X, Y) && !ellipse(22749.568000, 34354.042000, 833.560024, 833.560024, 0.000000, X, Y) && !ellipse(22892.564728, 30111.122101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23410.932200, 34393.360800, 579.949617, 579.949617, 0.000000, X, Y) && !ellipse(26415.266260, 31586.360200, 274.824008, 274.824008, 0.000000, X, Y) && !ellipse(24382.560000, 34947.297600, 1620.440047, 895.808026, 212.702000, X, Y) && !ellipse(27090.864319, 32911.365570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26962.182200, 29853.054600, 1195.272034, 1195.272034, 0.000000, X, Y) && !ellipse(27599.060000, 32171.018000, 1189.944034, 1189.944034, 0.000000, X, Y) && !ellipse(27782.590000, 31852.788000, 1469.216042, 1469.216042, 0.000000, X, Y) && !ellipse(23376.146454, 35116.678040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21840.785000, 30442.238000, 840.504024, 840.504024, 0.000000, X, Y) && !ellipse(26727.244781, 30667.239227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22477.148224, 30593.171875, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 16 03:31:59 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21.gif [Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create [Sun Jun 16 03:32:02 2013] Mean detx,y = (6091.80, 4235.38) [Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create [Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create [Sun Jun 16 03:32:02 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21_src_b10.pi.gz [Sun Jun 16 03:32:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21_bgd.pi.gz [Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create [Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21.rmf exists, delete to re-create [Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21.arf exists, delete to re-create [Sun Jun 16 03:37:42 2013] Updating aperture counts using extracted products [Sun Jun 16 03:37:42 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 3499.00 [Sun Jun 16 03:37:42 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21_bgd.pi.gz = 7561.00 [Sun Jun 16 03:37:42 2013] Got source and background scale factors 3242787.000000, 17284494.000000 [Sun Jun 16 03:37:42 2013] User source parameters: Position = (303.4, 386.1) = 5 35 43.21 -69 10 14.6 Extent = 18.8 (18.7-37.5)", rotation angle = 0 Source aperture counts = 2080.5 +/- 60.2 Background aperture counts = 1418.5 Rate = 0.02 +/- 0.0006 [Sun Jun 16 03:38:03 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 03:38:03 2013] Using photon index=1.80, rate=0.0027, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21.arf [Sun Jun 16 03:38:03 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 03:38:03 2013] Updating source flux to 5.3e-14 [Sun Jun 16 03:38:53 2013] Flag c found in src. 21 procflags, skipping spectral fitting [Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete