[Sat Jun 15 20:07:43 2013] Detection parameters:
  Position = (298.2, 272.6) = 5 35 47.46 -69 18 29.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 361.4 +/- 27.4
  Background counts = 136.7
  Rate = 0.004 +/- 0.0003

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 1.87'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 7.36"
[Sat Jun 15 20:08:46 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 7.36"
[Sat Jun 15 20:08:46 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src8.ximg exists
[Sat Jun 15 20:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src8.csv
[Sat Jun 15 20:08:46 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Jun 15 20:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src8.csv
[Sat Jun 15 20:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sat Jun 15 20:08:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:40 2013] Spatial fit model total counts = 3250.770000, observed total counts = 2800.000000
[Sat Jun 15 20:09:40 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:40 2013] Source is confused with source 69
[Sat Jun 15 20:10:14 2013] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 7.36"
[Sat Jun 15 20:10:14 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.832
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 7.36"
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src8.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src8.csv
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src8.csv
[Sat Jun 15 20:10:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src8.csv
[Sat Jun 15 20:10:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:11:07 2013] Spatial fit model total counts = 3264.940000, observed total counts = 2800.000000
[Sat Jun 15 20:11:07 2013] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:59 2013] XMMSAS src. selection expression = ellipse(25894.558563, 23671.505188, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17_src.reg
[Sun Jun 16 03:31:59 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (261, 235) - (336, 310)
[Sun Jun 16 03:31:59 2013] XMMSAS bgd. selection expression = annulus(25894.558563, 23671.505188, 1087.500000, 2175.000000, X, Y) && !ellipse(27979.186820, 26398.281190, 1299.067237, 1299.067237, 0.000000, X, Y) && !ellipse(26273.199200, 24531.572400, 336.057610, 336.057610, 0.000000, X, Y) && !ellipse(28596.000427, 25671.591858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26409.542000, 24840.438000, 1072.152031, 1072.152031, 0.000000, X, Y) && !ellipse(26331.119720, 23472.571808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27752.348938, 24972.472198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25854.982697, 25264.546661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25723.635742, 21851.017975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22362.182000, 26972.560000, 2356.336068, 2356.336068, 0.000000, X, Y) && !ellipse(25680.191498, 21477.392960, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25631.384094, 22487.131134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25346.170000, 26767.374000, 1107.656032, 1107.656032, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17.gif
[Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:02 2013] Mean detx,y = (-303.85, -3228.65) 
[Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:02 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sun Jun 16 03:32:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 03:32:28 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17.arf exists, delete to re-create
[Sun Jun 16 03:37:41 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:41 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 2035.00
[Sun Jun 16 03:37:41 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17_bgd.pi.gz = 4531.00
[Sun Jun 16 03:37:41 2013] Got source and background scale factors 1144780.000000, 5491180.000000
[Sun Jun 16 03:37:41 2013] User source parameters:
  Position = (298.2, 272.6) = 5 35 47.46 -69 18 29.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1090.4 +/- 46.1
  Background aperture counts = 944.6
  Rate = 0.01 +/- 0.0005

[Sun Jun 16 03:37:41 2013] Updating counts from extracted products
[Sun Jun 16 03:37:41 2013] Set source signif. to 1090.39/30.73 = 35.48
[Sun Jun 16 03:38:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:03 2013] Using photon index=1.80, rate=0.0107, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17.arf
[Sun Jun 16 03:38:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:03 2013] Updating source flux to 1.4e-13
[Sun Jun 16 03:38:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete