[Sat Jun 15 20:07:43 2013] Detection parameters:
  Position = (262.6, 116.0) = 5 36 16.97 -69 29 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.2 +/- 19.0
  Background counts = 59.3
  Rate = 0.001 +/- 0.0002

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 13.48'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 13.17 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 13.17"
[Sat Jun 15 20:08:46 2013] source mask rpix=3.0, npix_max = 49, mask sum = 54, frac = 1.085
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 56 for pass 0, mean size = 13.17"
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src56.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src56.csv
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src56_1.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src56.csv
[Sat Jun 15 20:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Sat Jun 15 20:08:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src56.csv
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Sat Jun 15 20:08:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src56.csv
[Sat Jun 15 20:08:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:40 2013] Warning, spatial fit 56 centroid is now closest to src. 55
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:40 2013] Source is confused with source 55
[Sat Jun 15 20:10:14 2013] Using EEF radius (= 13.17 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 13.17"
[Sat Jun 15 20:10:14 2013] source mask rpix=3.0, npix_max = 49, mask sum = 54, frac = 1.085
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 13.17"
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src49.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src49.csv
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src49_1.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src49.csv
[Sat Jun 15 20:10:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Sat Jun 15 20:10:17 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Sat Jun 15 20:10:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src49.csv
[Sat Jun 15 20:10:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:11:07 2013] Warning, spatial fit 49 centroid is now closest to src. 55
[Sat Jun 15 20:11:07 2013] Spatial fit model total counts = 1333.650000, observed total counts = 1201.000000
[Sat Jun 15 20:11:07 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:32:00 2013] XMMSAS src. selection expression = ellipse(22794.904785, 10044.147163, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:32:00 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15_src.reg
[Sun Jun 16 03:32:00 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (225, 79) - (300, 154)
[Sun Jun 16 03:32:00 2013] XMMSAS bgd. selection expression = annulus(22794.904785, 10044.147163, 1087.500000, 2175.000000, X, Y) && !ellipse(20635.658000, 11178.662200, 322.625609, 322.625609, 0.000000, X, Y) && !ellipse(20028.730652, 10136.388191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24361.486237, 9574.050331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22721.498535, 10467.780319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21250.746384, 10913.316803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21053.874634, 11340.172501, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 03:32:00 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15.gif
[Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:04 2013] Mean detx,y = (-7305.55, -15256.87) 
[Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:04 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sun Jun 16 03:32:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sun Jun 16 03:32:04 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 03:32:28 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15.arf exists, delete to re-create
[Sun Jun 16 03:37:54 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:55 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 504.00
[Sun Jun 16 03:37:55 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15_bgd.pi.gz = 1093.00
[Sun Jun 16 03:37:55 2013] Got source and background scale factors 1126078.000000, 2884798.000000
[Sun Jun 16 03:37:55 2013] User source parameters:
  Position = (262.6, 116.0) = 5 36 16.97 -69 29 51.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 77.3 +/- 23.5
  Background aperture counts = 426.7
  Rate = 0.0008 +/- 0.0002

[Sun Jun 16 03:37:55 2013] Updating counts from extracted products
[Sun Jun 16 03:37:55 2013] Set source signif. to 77.35/20.66 = 3.74
[Sun Jun 16 03:38:06 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:06 2013] Using photon index=1.80, rate=0.000762, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15.arf
[Sun Jun 16 03:38:06 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:06 2013] Updating source flux to 2.8e-14
[Sun Jun 16 03:38:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete