[Sat Jun 15 20:07:43 2013] Detection parameters:
  Position = (297.8, 395.3) = 5 35 47.81 -69 9 34.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 509.0 +/- 29.5
  Background counts = 103.2
  Rate = 0.01 +/- 0.0006

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 7.02'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 9.94"
[Sat Jun 15 20:08:46 2013] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.677
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.94"
[Sat Jun 15 20:08:46 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jun 15 20:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src4.csv
[Sat Jun 15 20:08:46 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jun 15 20:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src4.csv
[Sat Jun 15 20:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 15 20:08:48 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jun 15 20:08:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Jun 15 20:08:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:40 2013] Spatial fit model total counts = 2908.740000, observed total counts = 1983.000000
[Sat Jun 15 20:09:40 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:09:40 2013] Spatial fit model total counts = 2490.930000, observed total counts = 1921.000000
[Sat Jun 15 20:09:40 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:09:40 2013] Source is confused with source 21
[Sat Jun 15 20:10:14 2013] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 9.94"
[Sat Jun 15 20:10:14 2013] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.677
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.94"
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src4.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src4.csv
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src4.csv
[Sat Jun 15 20:10:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Jun 15 20:10:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jun 15 20:10:16 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:11:07 2013] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.825709 pixels away
[Sat Jun 15 20:11:07 2013] Spatial fit model total counts = 4466.710000, observed total counts = 4324.000000
[Sat Jun 15 20:11:07 2013] Offset between fit and detection position for source 13 = 5.649885 pixels
[Sat Jun 15 20:11:07 2013] Warning, changing simple spatial fit ID from 4 to 14
[Sat Jun 15 20:11:07 2013] 4221.387000 total counts/ 3408.950000 bgd. counts: snr = 13.914877
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 5.649885 pixels
  Position = (292.8, 398.0) = 5 35 51.85 -69 9 22.9
  Extent = 31.5 (28.6-62.9)" x 18.0 (15.4-20.9)", rotation angle = 0 (358-0) degrees
  Source counts = 812.4 +/- 65.0
  Background counts = 3408.9
  Rate = 0.008 +/- 0.0006
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.37
[Sun Jun 16 03:31:58 2013] XMMSAS src. selection expression = ellipse(25426.952000, 34578.798000, 1887.186054, 1079.250031, 0.000000, X, Y)
[Sun Jun 16 03:31:58 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13_src.reg
[Sun Jun 16 03:31:58 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (184, 290) - (401, 506)
[Sun Jun 16 03:31:58 2013] XMMSAS bgd. selection expression = annulus(25426.952000, 34578.798000, 3145.310091, 6290.620181, X, Y) && !ellipse(18487.075943, 29620.331970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22749.568000, 34354.042000, 833.560024, 833.560024, 0.000000, X, Y) && !ellipse(22892.564728, 30111.122101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23410.932200, 34393.360800, 579.949617, 579.949617, 0.000000, X, Y) && !ellipse(26348.150000, 33546.400000, 1501.496043, 1501.496043, 0.000000, X, Y) && !ellipse(26415.266260, 31586.360200, 274.824008, 274.824008, 0.000000, X, Y) && !ellipse(21047.248400, 31844.293200, 349.848010, 349.848010, 0.000000, X, Y) && !ellipse(24382.560000, 34947.297600, 1620.440047, 895.808026, 212.702000, X, Y) && !ellipse(27090.864319, 32911.365570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26962.182200, 29853.054600, 1195.272034, 1195.272034, 0.000000, X, Y) && !ellipse(20601.650400, 31944.020000, 1519.040044, 1519.040044, 0.000000, X, Y) && !ellipse(20490.295600, 32515.450000, 1041.536030, 1041.536030, 0.000000, X, Y) && !ellipse(20612.858000, 32654.220000, 1611.856046, 1611.856046, 0.000000, X, Y) && !ellipse(27599.060000, 32171.018000, 1189.944034, 1189.944034, 0.000000, X, Y) && !ellipse(27782.590000, 31852.788000, 1469.216042, 1469.216042, 0.000000, X, Y) && !ellipse(20707.945557, 31112.330994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23376.146454, 35116.678040, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21840.785000, 30442.238000, 840.504024, 840.504024, 0.000000, X, Y) && !ellipse(26965.002655, 27701.574158, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26727.244781, 30667.239227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31156.553162, 30010.961121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22362.182000, 26972.560000, 2356.336068, 2356.336068, 0.000000, X, Y) && !ellipse(22477.148224, 30593.171875, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 03:31:58 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13.gif
[Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:02 2013] Mean detx,y = (7473.25, 4177.66) 
[Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:02 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Jun 16 03:32:02 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Jun 16 03:32:02 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13.rmf exists, delete to re-create
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13.arf exists, delete to re-create
[Sun Jun 16 03:37:40 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:40 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 4501.00
[Sun Jun 16 03:37:40 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 23421.00
[Sun Jun 16 03:37:40 2013] Got source and background scale factors 5328131.000000, 64792971.000000
[Sun Jun 16 03:37:40 2013] User source parameters:
  Position = (292.8, 398.0) = 5 35 51.85 -69 9 22.9
  Extent = 31.5 (28.6-62.9)" x 18.0 (15.4-20.9)", rotation angle = 0 (358-0) degrees
  Source aperture counts = 2575.0 +/- 68.1
  Background aperture counts = 1926.0
  Rate = 0.03 +/- 0.0007

[Sun Jun 16 03:38:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:03 2013] Using photon index=1.80, rate=0.008, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13.arf
[Sun Jun 16 03:38:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:03 2013] Updating source flux to 1.5e-13
[Sun Jun 16 03:38:53 2013] Flag p found in src. 13 procflags, skipping spectral fitting
[Sun Jun 16 03:38:53 2013] Flag c found in src. 13 procflags, skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete