[Sat Jun 15 20:07:42 2013] Detection parameters:
  Position = (221.0, 151.1) = 5 36 51.28 -69 27 16.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 293.4 +/- 25.7
  Background counts = 79.9
  Rate = 0.003 +/- 0.0003

[Sat Jun 15 20:07:46 2013] Off-axis axis estimate = 12.07'
[Sat Jun 15 20:08:46 2013] Using EEF radius (= 12.46 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:46 2013] Initial guess for spatial extent in simple fitting = 12.46"
[Sat Jun 15 20:08:46 2013] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.795
[Sat Jun 15 20:08:46 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 12.46"
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src17.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src17.csv
[Sat Jun 15 20:08:47 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Jun 15 20:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src17.csv
[Sat Jun 15 20:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Jun 15 20:08:49 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Jun 15 20:08:49 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Jun 15 20:09:40 2013] Warning, spatial fit 17 centroid is now closest to src. 12
[Sat Jun 15 20:09:40 2013] Source 10 is offset by -3.762672 and 0.281443 pixels which is larger than
2 X fitted extent = 1.576166 x 1.576166, not incorporating fit results
[Sat Jun 15 20:09:40 2013] Source 10 is offset by 7.507007 and -0.446948 pixels which is larger than
2 X fitted extent = 1.432832 x 1.432832, not incorporating fit results
[Sat Jun 15 20:09:40 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:40 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:40 2013] Assessing source extent using major
[Sat Jun 15 20:09:40 2013] Source does appear to be extended
[Sat Jun 15 20:09:40 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:14 2013] Using EEF radius (= 12.46 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:14 2013] Initial guess for spatial extent in simple fitting = 12.46"
[Sat Jun 15 20:10:14 2013] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.795
[Sat Jun 15 20:10:14 2013] Giving source the simple spatial ID 17 for pass 1, mean size = 12.46"
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src17.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src17.csv
[Sat Jun 15 20:10:15 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Jun 15 20:10:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src17.csv
[Sat Jun 15 20:10:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Jun 15 20:10:16 2013] fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Jun 15 20:10:16 2013] Fit fullrun_mos2_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Jun 15 20:11:07 2013] Warning, spatial fit 17 centroid is now closest to src. 12
[Sat Jun 15 20:11:07 2013] Spatial fit model total counts = 1086.310000, observed total counts = 1069.000000
[Sat Jun 15 20:11:07 2013] Offset between fit and detection position for source 10 = 1.466554 pixels
[Sat Jun 15 20:11:07 2013] Warning, changing simple spatial fit ID from 17 to 19
[Sat Jun 15 20:11:07 2013] 1108.880500 total counts/ 1030.080000 bgd. counts: snr = 2.455237
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.466554 pixels
  Position = (220.0, 152.2) = 5 36 52.04 -69 27 11.4
  Extent = 6.2 (4.3-7.6)", rotation angle = 0
  Source counts = 78.8 +/- 33.3
  Background counts = 1030.1
  Rate = 0.0008 +/- 0.0003
[Sat Jun 15 20:11:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:11:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:11:07 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:11:07 2013] Source does appear to be extended
[Sat Jun 15 20:11:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:11:07 2013] Source is confused with source 88
[Sun Jun 16 03:31:59 2013] XMMSAS src. selection expression = ellipse(19095.316000, 13195.320000, 372.306611, 372.306611, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Not overwriting source region fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10_src.reg
[Sun Jun 16 03:31:59 2013] Extracting stamp from image fullrun_mos2_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (199, 131) - (241, 174)
[Sun Jun 16 03:31:59 2013] XMMSAS bgd. selection expression = annulus(19095.316000, 13195.320000, 620.511018, 1241.022036, X, Y) && !ellipse(18572.952000, 12609.826000, 559.832816, 559.832816, 0.000000, X, Y) && !ellipse(17337.557114, 13548.489136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17532.762500, 13814.188000, 1649.504047, 979.464028, 304.911000, X, Y) && !ellipse(19588.512192, 13607.611328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21053.874634, 11340.172501, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 16 03:31:59 2013] Writing fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10.gif
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0556350101/products/events/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Sun Jun 16 03:32:03 2013] Mean detx,y = (-2510.38, -15580.58) 
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10_src.img and ../../xmm0556350101/products/images/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Sun Jun 16 03:32:03 2013] Setting source spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sun Jun 16 03:32:03 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sun Jun 16 03:32:03 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Sun Jun 16 03:32:28 2013] Not generating rmf since there are only 78 counts
[Sun Jun 16 03:32:28 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:32:28 2013] fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Sun Jun 16 03:37:44 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:44 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 426.00
[Sun Jun 16 03:37:45 2013] Total counts from fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10_bgd.pi.gz = 381.00
[Sun Jun 16 03:37:45 2013] Got source and background scale factors 436800.000000, 994676.000000
[Sun Jun 16 03:37:45 2013] User source parameters:
  Position = (220.0, 152.2) = 5 36 52.04 -69 27 11.4
  Extent = 6.2 (4.3-7.6)", rotation angle = 0
  Source aperture counts = 258.7 +/- 21.7
  Background aperture counts = 167.3
  Rate = 0.003 +/- 0.0002

[Sun Jun 16 03:38:04 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:38:04 2013] Using photon index=1.80, rate=0.000776, arf fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10.arf
[Sun Jun 16 03:38:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:38:04 2013] Updating source flux to 2.9e-14
[Sun Jun 16 03:38:53 2013] Flag b found in src. 10 procflags, skipping spectral fitting
[Sun Jun 16 03:38:53 2013] Flag c found in src. 10 procflags, skipping spectral fitting
[Sun Jun 16 03:38:53 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 03:39:35 2013] xmm0556350101/analysis//spectral/fullrun_mos2_xmm0556350101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete