[Sat Jun 15 20:07:39 2013] Detection parameters:
  Position = (155.8, 409.1) = 5 37 43.44 -69 8 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.3 +/- 16.9
  Background counts = 52.1
  Rate = 0.001 +/- 0.0002

[Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 13.09'
[Sat Jun 15 20:08:43 2013] Using EEF radius (= 12.97 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 12.97"
[Sat Jun 15 20:08:43 2013] source mask rpix=3.0, npix_max = 48, mask sum = 43, frac = 0.887
[Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 58 for pass 0, mean size = 12.97"
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src58.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src58.csv
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src58_1.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src58.csv
[Sat Jun 15 20:08:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:46 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Sat Jun 15 20:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src58.csv
[Sat Jun 15 20:08:46 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Sat Jun 15 20:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src58.csv
[Sat Jun 15 20:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:22 2013] Source 9 is offset by 6.634614 and -6.405009 pixels which is larger than
2 X fitted extent = 0.770474 x 0.770474, not incorporating fit results
[Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:22 2013] Assessing source extent using major
[Sat Jun 15 20:09:22 2013] Source does appear to be extended
[Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:12 2013] Using EEF radius (= 12.97 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 12.97"
[Sat Jun 15 20:10:12 2013] source mask rpix=3.0, npix_max = 48, mask sum = 43, frac = 0.887
[Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 52 for pass 1, mean size = 12.97"
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src52.ximg exists
[Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src52.csv
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src52_1.ximg exists
[Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src52.csv
[Sat Jun 15 20:10:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Sat Jun 15 20:10:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Sat Jun 15 20:10:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src52.csv
[Sat Jun 15 20:10:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:53 2013] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 17.009280 pixels away
[Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:53 2013] Assessing source extent using major
[Sat Jun 15 20:10:53 2013] Source does appear to be extended
[Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:39 2013] XMMSAS src. selection expression = ellipse(13506.141418, 35540.078217, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:31:39 2013] Not overwriting source region fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9_src.reg
[Sun Jun 16 03:31:39 2013] Extracting stamp from image fullrun_mos1_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (118, 372) - (193, 447)
[Sun Jun 16 03:31:39 2013] XMMSAS bgd. selection expression = annulus(13506.141418, 35540.078217, 1087.500000, 2175.000000, X, Y) && !ellipse(13142.742249, 33443.924622, 2610.000000, 2610.000000, 0.000000, X, Y)
[Sun Jun 16 03:31:39 2013] Writing fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9.gif
[Sun Jun 16 03:31:43 2013] ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create
[Sun Jun 16 03:31:43 2013] Mean detx,y = (-2830.46, -16846.29) 
[Sun Jun 16 03:31:43 2013] ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9_src.img and ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create
[Sun Jun 16 03:31:43 2013] ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create
[Sun Jun 16 03:31:43 2013] Setting source spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Jun 16 03:31:43 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Jun 16 03:31:43 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create
[Sun Jun 16 03:31:58 2013] Not generating rmf since there are only 97 counts
[Sun Jun 16 03:31:58 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9.arf exists, delete to re-create
[Sun Jun 16 03:37:34 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:35 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 540.00
[Sun Jun 16 03:37:35 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9_bgd.pi.gz = 783.00
[Sun Jun 16 03:37:35 2013] Got source and background scale factors 907116.000000, 1985862.000000
[Sun Jun 16 03:37:35 2013] User source parameters:
  Position = (155.8, 409.1) = 5 37 43.44 -69 8 31.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 182.3 +/- 24.3
  Background aperture counts = 357.7
  Rate = 0.002 +/- 0.0002

[Sun Jun 16 03:37:35 2013] Updating counts from extracted products
[Sun Jun 16 03:37:35 2013] Set source signif. to 182.34/18.91 = 9.64
[Sun Jun 16 03:37:38 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:38 2013] Using photon index=1.80, rate=0.0018, arf fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9.arf
[Sun Jun 16 03:37:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:38 2013] Updating source flux to 9.2e-14
[Sun Jun 16 03:38:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:38:53 2013] xmm0556350101/analysis//spectral/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete