[Sat Jun 15 20:07:39 2013] Detection parameters: Position = (297.8, 396.2) = 5 35 47.82 -69 9 33.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 413.3 +/- 27.0 Background counts = 111.0 Rate = 0.004 +/- 0.0003 [Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 7.09' [Sat Jun 15 20:08:43 2013] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting [Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 9.97" [Sat Jun 15 20:08:43 2013] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.737 [Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 9.97" [Sat Jun 15 20:08:43 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src8.ximg exists [Sat Jun 15 20:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src8.csv [Sat Jun 15 20:08:43 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src8_1.ximg exists [Sat Jun 15 20:08:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src8.csv [Sat Jun 15 20:08:43 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Sat Jun 15 20:08:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src8.csv [Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Sat Jun 15 20:08:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src8.csv [Sat Jun 15 20:08:45 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:09:22 2013] Warning, spatial fit 8 centroid is now closest to src. 11 [Sat Jun 15 20:09:22 2013] Spatial fit model total counts = 2023.550000, observed total counts = 1956.000000 [Sat Jun 15 20:09:22 2013] Offset between fit and detection position for source 7 = 1.252450 pixels [Sat Jun 15 20:09:22 2013] Warning, changing simple spatial fit ID from 8 to 24 [Sat Jun 15 20:09:22 2013] 1784.232000 total counts/ 1359.720000 bgd. counts: snr = 11.512383 Spatial fit parameters: Offset between fit and detection position for source 7 = 1.252450 pixels Position = (296.7, 395.6) = 5 35 48.69 -69 9 33.6 Extent = 11.7 (8.2-16.1)", rotation angle = 0 Source counts = 424.5 +/- 42.2 Background counts = 1359.7 Rate = 0.004 +/- 0.0004 [Sat Jun 15 20:09:22 2013] Spatial fit model total counts = 2133.720000, observed total counts = 1792.000000 [Sat Jun 15 20:09:22 2013] Poor agreement between spatial fit and data for source 7 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:09:22 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:09:22 2013] Source does appear to be extended [Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jun 15 20:09:22 2013] Source is confused with source 16 [Sat Jun 15 20:10:12 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 11.71" [Sat Jun 15 20:10:12 2013] source mask rpix=2.7, npix_max = 40, mask sum = 37, frac = 0.908 [Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 11.71" [Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src8.ximg exists [Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src8.csv [Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src8_1.ximg exists [Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src8.csv [Sat Jun 15 20:10:12 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src8_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src8.ximg exists [Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists [Sat Jun 15 20:10:13 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly [Sat Jun 15 20:10:53 2013] Warning, spatial fit 8 centroid is now closest to src. 14 [Sat Jun 15 20:10:53 2013] Spatial fit model total counts = 5382.720000, observed total counts = 3939.000000 [Sat Jun 15 20:10:53 2013] Poor agreement between spatial fit and data for source 7 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 15 20:10:53 2013] Spatial fit model total counts = 2035.070000, observed total counts = 1792.000000 [Sat Jun 15 20:10:53 2013] Poor agreement between spatial fit and data for source 7 It may help to tweak spatial fit manually Not incorporating fit results [Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000 [Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jun 15 20:10:53 2013] Assessing source extent using major axis lower bound [Sat Jun 15 20:10:53 2013] Source does appear to be extended [Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 16 03:31:37 2013] XMMSAS src. selection expression = ellipse(25763.412000, 34365.364000, 702.498020, 702.498020, 0.000000, X, Y) [Sun Jun 16 03:31:37 2013] Not overwriting source region fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7_src.reg [Sun Jun 16 03:31:37 2013] Extracting stamp from image fullrun_mos1_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (256, 355) - (337, 436) [Sun Jun 16 03:31:37 2013] XMMSAS bgd. selection expression = annulus(25763.412000, 34365.364000, 1170.830034, 2341.660067, X, Y) && !ellipse(26340.630000, 33875.584000, 1528.048044, 1528.048044, 0.000000, X, Y) && !ellipse(23131.080000, 34425.431600, 1614.984046, 1614.984046, 0.000000, X, Y) && !ellipse(24869.255280, 34743.556152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27693.082600, 32057.638920, 1451.944042, 1451.944042, 0.000000, X, Y) && !ellipse(26822.807251, 32850.817627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27303.172000, 32761.037400, 814.136023, 814.136023, 0.000000, X, Y) && !ellipse(23514.014364, 35235.787765, 1528.048044, 907.046523, 74.348845, X, Y) && !ellipse(26543.956000, 33602.128000, 1494.864043, 1494.864043, 0.000000, X, Y) && !ellipse(25300.272736, 34654.148041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25194.761871, 34110.743195, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 16 03:31:37 2013] Writing fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7.gif [Sun Jun 16 03:31:41 2013] ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create [Sun Jun 16 03:31:41 2013] Mean detx,y = (4657.06, -7355.31) [Sun Jun 16 03:31:41 2013] ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7_src.img and ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create [Sun Jun 16 03:31:41 2013] ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create [Sun Jun 16 03:31:41 2013] Setting source spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7_src_b10.pi.gz [Sun Jun 16 03:31:41 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7_bgd.pi.gz [Sun Jun 16 03:31:41 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create [Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7.rmf exists, delete to re-create [Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7.arf exists, delete to re-create [Sun Jun 16 03:37:21 2013] Updating aperture counts using extracted products [Sun Jun 16 03:37:21 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 1331.00 [Sun Jun 16 03:37:21 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7_bgd.pi.gz = 1797.00 [Sun Jun 16 03:37:21 2013] Got source and background scale factors 1074652.000000, 4567117.000000 [Sun Jun 16 03:37:21 2013] User source parameters: Position = (296.7, 395.6) = 5 35 48.69 -69 9 33.6 Extent = 11.7 (8.2-16.1)", rotation angle = 0 Source aperture counts = 908.2 +/- 37.5 Background aperture counts = 422.8 Rate = 0.009 +/- 0.0004 [Sun Jun 16 03:37:35 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 16 03:37:35 2013] Using photon index=1.80, rate=0.00418, arf fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7.arf [Sun Jun 16 03:37:35 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 16 03:37:35 2013] Updating source flux to 9.9e-14 [Sun Jun 16 03:38:15 2013] Flag p found in src. 7 procflags, skipping spectral fitting [Sun Jun 16 03:38:15 2013] Flag c found in src. 7 procflags, skipping spectral fitting [Sun Jun 16 03:38:53 2013] xmm0556350101/analysis//spectral/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete