[Sat Jun 15 20:07:41 2013] Detection parameters:
  Position = (397.7, 125.1) = 5 34 25.10 -69 29 9.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 245.9 +/- 23.3
  Background counts = 70.5
  Rate = 0.002 +/- 0.0002

[Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 14.48'
[Sat Jun 15 20:08:43 2013] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:43 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 13.67"
[Sat Jun 15 20:08:43 2013] source mask rpix=3.1, npix_max = 53, mask sum = 51, frac = 0.961
[Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 13.67"
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src23.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src23.csv
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src23.csv
[Sat Jun 15 20:08:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat Jun 15 20:08:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat Jun 15 20:08:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat Jun 15 20:08:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:09:22 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 13.994649 pixels away
[Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:22 2013] Assessing source extent using major
[Sat Jun 15 20:09:22 2013] Source does appear to be extended
[Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:12 2013] Using EEF radius (= 13.67 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 13.67"
[Sat Jun 15 20:10:12 2013] source mask rpix=3.1, npix_max = 53, mask sum = 51, frac = 0.961
[Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 13.67"
[Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src23.ximg exists
[Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src23.csv
[Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src23_1.ximg exists
[Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src23.csv
[Sat Jun 15 20:10:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sat Jun 15 20:10:13 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sat Jun 15 20:10:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src23.csv
[Sat Jun 15 20:10:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:53 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 11.480614 pixels away
[Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:53 2013] Assessing source extent using major
[Sat Jun 15 20:10:53 2013] Source does appear to be extended
[Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:38 2013] XMMSAS src. selection expression = ellipse(34553.506500, 10836.511452, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 16 03:31:38 2013] Not overwriting source region fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61_src.reg
[Sun Jun 16 03:31:38 2013] Extracting stamp from image fullrun_mos1_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (360, 88) - (435, 163)
[Sun Jun 16 03:31:38 2013] XMMSAS bgd. selection expression = annulus(34553.506500, 10836.511452, 1087.500000, 2175.000000, X, Y)
[Sun Jun 16 03:31:38 2013] Writing fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61.gif
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61_src.evt and ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61_bgd.evt exist, delete to re-create
[Sun Jun 16 03:31:42 2013] Mean detx,y = (-6583.18, 15110.50) 
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61_src.img and ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61_bgd.img exist, delete to re-create
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61_bgd.pi exist, delete to re-create
[Sun Jun 16 03:31:42 2013] Setting source spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sun Jun 16 03:31:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61_bgd.lc exist, delete to re-create
[Sun Jun 16 03:31:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 16 03:31:58 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61.arf exists, delete to re-create
[Sun Jun 16 03:37:25 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:25 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 605.00
[Sun Jun 16 03:37:25 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61_bgd.pi.gz = 2323.00
[Sun Jun 16 03:37:25 2013] Got source and background scale factors 1022004.000000, 5919587.000000
[Sun Jun 16 03:37:25 2013] User source parameters:
  Position = (397.7, 125.1) = 5 34 25.10 -69 29 9.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 203.9 +/- 25.6
  Background aperture counts = 401.1
  Rate = 0.002 +/- 0.0003

[Sun Jun 16 03:37:25 2013] Updating counts from extracted products
[Sun Jun 16 03:37:25 2013] Set source signif. to 203.94/20.03 = 10.18
[Sun Jun 16 03:37:37 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:37 2013] Using photon index=1.80, rate=0.00201, arf fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61.arf
[Sun Jun 16 03:37:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:37 2013] Updating source flux to 6.7e-14
[Sun Jun 16 03:38:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun 16 03:38:53 2013] xmm0556350101/analysis//spectral/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete