[Sat Jun 15 20:07:41 2013] Detection parameters:
  Position = (353.2, 235.7) = 5 35 2.19 -69 21 9.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.7 +/- 21.3
  Background counts = 108.3
  Rate = 0.002 +/- 0.0003

[Sat Jun 15 20:07:41 2013] Off-axis axis estimate = 6.04'
[Sat Jun 15 20:08:43 2013] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:08:43 2013] Initial guess for spatial extent in simple fitting = 9.45"
[Sat Jun 15 20:08:43 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.875
[Sat Jun 15 20:08:43 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.45"
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src25.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src25.csv
[Sat Jun 15 20:08:44 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Jun 15 20:08:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src25.csv
[Sat Jun 15 20:08:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Jun 15 20:08:45 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Jun 15 20:08:45 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Jun 15 20:09:22 2013] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 60 at 11.204896 pixels away
[Sat Jun 15 20:09:22 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:09:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:09:22 2013] Assessing source extent using major
[Sat Jun 15 20:09:22 2013] Source does appear to be extended
[Sat Jun 15 20:09:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 15 20:10:12 2013] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Sat Jun 15 20:10:12 2013] Initial guess for spatial extent in simple fitting = 9.45"
[Sat Jun 15 20:10:12 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.875
[Sat Jun 15 20:10:12 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 9.45"
[Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src25.ximg exists
[Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src25.csv
[Sat Jun 15 20:10:12 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Jun 15 20:10:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src25.csv
[Sat Jun 15 20:10:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Jun 15 20:10:14 2013] fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Jun 15 20:10:14 2013] Fit fullrun_mos1_xmm0556350101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat Jun 15 20:10:53 2013] Spatial fit model total counts = 1309.610000, observed total counts = 1218.000000
[Sat Jun 15 20:10:53 2013] Offset between fit and detection position for source 60 = 0.085400 pixels
[Sat Jun 15 20:10:53 2013] 1315.910900 total counts/ 1221.730000 bgd. counts: snr = 2.694482
Spatial fit parameters:
  Offset between fit and detection position for source 60 = 0.085400 pixels
  Position = (353.2, 235.6) = 5 35 2.20 -69 21 9.1
  Extent = 3.6 (2.7-5.7)", rotation angle = 0
  Source counts = 94.2 +/- 36.3
  Background counts = 1221.7
  Rate = 0.0009 +/- 0.0004
[Sat Jun 15 20:10:53 2013] Vigneting correction estimate = 1.000000
[Sat Jun 15 20:10:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 15 20:10:53 2013] Assessing source extent using major axis lower bound
[Sat Jun 15 20:10:53 2013] Source does appear to be extended
[Sat Jun 15 20:10:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 16 03:31:38 2013] XMMSAS src. selection expression = ellipse(30682.714000, 20448.318600, 218.818806, 218.818806, 0.000000, X, Y)
[Sun Jun 16 03:31:38 2013] Not overwriting source region fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60_src.reg
[Sun Jun 16 03:31:38 2013] Extracting stamp from image fullrun_mos1_xmm0556350101_pi300-10000_cl_sm2.00.img.gz, (341, 223) - (366, 248)
[Sun Jun 16 03:31:38 2013] XMMSAS bgd. selection expression = annulus(30682.714000, 20448.318600, 364.698010, 729.396021, X, Y)
[Sun Jun 16 03:31:38 2013] Writing fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60.gif
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60_src.evt and ../../xmm0556350101/products/events/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60_bgd.evt exist, delete to re-create
[Sun Jun 16 03:31:42 2013] Mean detx,y = (-2191.59, 5846.41) 
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60_src.img and ../../xmm0556350101/products/images/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60_bgd.img exist, delete to re-create
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60_src_b10.pi.gz and ../../xmm0556350101/products/spectra/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60_bgd.pi exist, delete to re-create
[Sun Jun 16 03:31:42 2013] Setting source spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60_src_b10.pi.gz
[Sun Jun 16 03:31:42 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60_bgd.pi.gz
[Sun Jun 16 03:31:42 2013] ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60_src.lc and ../../xmm0556350101/products/lightcurves/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60_bgd.lc exist, delete to re-create
[Sun Jun 16 03:31:58 2013] Not generating rmf since there are only 94 counts
[Sun Jun 16 03:31:58 2013] rmf not generated due to insufficient counts
[Sun Jun 16 03:31:58 2013] fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60.arf exists, delete to re-create
[Sun Jun 16 03:37:26 2013] Updating aperture counts using extracted products
[Sun Jun 16 03:37:26 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60_src_b10.pi.gz = 195.00
[Sun Jun 16 03:37:26 2013] Total counts from fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60_bgd.pi.gz = 638.00
[Sun Jun 16 03:37:26 2013] Got source and background scale factors 153600.000000, 1142476.000000
[Sun Jun 16 03:37:26 2013] User source parameters:
  Position = (353.2, 235.6) = 5 35 2.20 -69 21 9.1
  Extent = 3.6 (2.7-5.7)", rotation angle = 0
  Source aperture counts = 109.2 +/- 15.0
  Background aperture counts = 85.8
  Rate = 0.001 +/- 0.0001

[Sun Jun 16 03:37:37 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun 16 03:37:37 2013] Using photon index=1.80, rate=0.000927, arf fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60.arf
[Sun Jun 16 03:37:37 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 16 03:37:37 2013] Updating source flux to 2.2e-14
[Sun Jun 16 03:38:15 2013] Source 60 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 16 03:38:53 2013] xmm0556350101/analysis//spectral/fullrun_mos1_xmm0556350101_pi300-10000_pass1_cl_src60_pl.csv not found, spectral fit skipped or did not complete